Used Jig for sale (174)

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, on it in horizontal plane around 120 mm with scale adjustable admission. On top of this, again on a round column, basic height adjustment on the column with clamping. Round guide with rack and lever for drill feed, stroke 100 mm. Space requirement over all: 600 x 400 x 850 mm high weight: Kdjdjc U U Udspfx Anwjn

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min Kdjdpfx Ajxyadtsnwsn weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 800 rpm, spindle speed (min.): 4 rpm, table length: 1,800 mm, table width: 1,600 mm, table load: 10,000 kg, total height: 3,800 mm, total length: 7,030 mm, total width: 4,665 mm, spindle diameter: 130 mm, spindle motor power: 15,000 W, MTP TPX6113-2 HORIZONTAL BORING MACHINE Horizontal Boring Machine TPX6113/2 – Precision and Power for Heavy Machining The TPX6113/2 horizontal boring machine is a robust and efficient solution designed for precise machining of large and heavy workpieces. Thanks to its rigid construction and high technical performance, it is ideally suited for use in the mechanical, energy, and steel structure industries. The machine is equipped with a Ø130 mm spindle, ensuring high stability and enabling demanding machining operations. A powerful 15 kW main motor and high torque guarantee efficient performance even under heavy loads. The large worktable (1800 × 1600 mm) with a maximum load capacity of 10,000 kg allows machining of heavy components without compromise. The full table rotation (B axis – 360°) increases flexibility and enables multi-side machining without repositioning the workpiece. Technical Specifications: Spindle diameter: Ø130 mm Max spindle torque: 3136 Nm Max spindle feed force: 31,360 N Number of spindle speeds: 24 Spindle speed range: 4–800 rpm Main motor power: 15 kW Max facing head torque: 4900 Nm Facing head diameter: 750 mm Facing head speed range: 2.5–125 rpm Number of facing head speeds: 18 Table size: 1800 × 1600 mm Max table load: 10,000 kg Kedpfx Aoy Eyg Usnwjdn T-slots: 28 mm × 10 Axis travels (X/Y/Z/W/U): 2000 / 1800 / 2000 / 900 / 250 mm Table rotation (B axis): 360° Rapid feed (X/Y/Z/W): 2500 mm/min Feed per spindle revolution (X/Y/Z/U): 0.05–8 / 0.01–2 mm/rev Measurement system accuracy (X/Y/Z): 0.005 mm (Z optional) Measurement system accuracy (B axis): 0.001 mm (optional) Dimensions: 7030 × 4665 × 3800 mm Machine weight: 29,300 kg

Condition: good (used), spindle diameter 105 mm x 600 mm-TRAVEL Kedpouldt Njfx Anwedn y-travel 400 mm spindle throat 475 mm Spindle speed - infinitely variable 70-2000 U / min table surface 800 x 400 mm Automatic spindle movement weight of the machine approximately 2.5 t

Year of construction: 2000, condition: ready for operation (used), This ERREBI TM5 was manufactured in 2000. Designed for wooden pallet and packaging production, it operates on multiple workstations for simultaneous component nailing. Featuring a CNC system, it ensures all movements are controlled with no manual adjustments needed, allowing quick format changes. Optional tools like drills and saws can be added. Contact us for more information about this machine. • Model: TM5 CNC nailing machine for wooden pallets and packaging • Multi-station operation: works on two or more workstations • Capabilities: repeated production of the same component or simultaneous nailing of different parts Ksdpfx Anex D Eabjwodn • Control: CNC-managed movements with no manual adjustments required • Quick changeover: formats recalled from CNC memory for fast setup • Setup aids: production can start in minutes using jigs/templates Additional equipment • Optional tools: drills, milling units, circular saws, and other equipment • Auxiliary tooling/fixtures: semi-automatic jigs or pre-mounted templates (if available)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,357 h, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 370 mm, This Sodick AG60L Die-sink EDM machine was manufactured in 2012. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1500 kg. The machine includes a linear motor, glass scales, and a remote control for enhanced precision and ease of use. Consider the opportunity to buy this Sodick AG60L die-sink EDM machine. Contact us for more information about this machine. Additional equipment • Replaceable paper filter / SEC-10 (C-axis) / SGF2 Nano Wear Unit / Fire Extinguisher / TMM3 Power Generator / Dielectric Cooling Unit / 15" TFT Touch Screen / Lowerable Work Container • Linear motor (X-, Y-, Z-axes) / Glass scales in X-, Y-, Z-axes / Ceramic work area / Remote control • Accessories include electrodes (graphite, tungsten, and copper), electrode holders, and jigs with documentation. / Some electrode holders with electrodes are still in the machine. Machine Benefits Kdedpfxsx D Rytj Anwsn Technical Machine Benefits • Dimensions of machine (lxwxh): 1852 x 2825 x 2570 mm / machine weight: 5350 kg • Max. Workpiece weight: 1500 kg / ceramic table dimensions (w x d): 750 x 550 mm • Floor-table distance: 850 mm / max. Electrode weight: 50 kg • Dielectric fluid level (min-max): 150 - 400 mm / dielectric capacity: 465 l

Condition: excellent (used), Year of construction: 1996, JUNG JF 600 Surface Grinding Machine Jung JF 600 Year of manufacture 1996 Overhauled in 2018 Excellent CONDITION The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 1993 / 2018 Table length: 600 mm Table width: 250 mm Axis movement: Longitudinal travel (X-axis): 600 mm Cross travel (Z-axis): 280 mm Maximum distance between table and spindle center: 500 mm Grinding length: 600 mm Table speed: Continuously adjustable from: 1 m/min to: 24 m/min Creep feed: from: 0.03 m/min to: 0.40 m/min Automatic cross feed: Continuously adjustable from: 0.010 mm/min to: 10000 mm/min Connection: 50 Hz 3x 380 Volt Grinding spindle motor: 9.5 kW Total power requirement: 13 kVA Machine weight approx.: 2500 kg Machine dimensions: Length: 2910 mm Width: 2320 mm Kdedpfx Anjyxdalewon Height: 1840 mm Additional equipment: Coolant system About the machine: For sale is a Jung JF 600 surface grinding machine. This universal surface grinder is in very good original condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. A grinding travel of 600 mm on the longitudinal axis and a cross travel of 300 mm make this machine ideal for toolmaking, jig and fixture construction, and small batch production. This model series is characterized by extensive standard equipment and ease of use. The robust spindle head design and the double V guideways in both the longitudinal and cross axes guarantee long-term precision. The intuitive controls make operation easy and significantly increase productivity. The guideways are regularly lubricated via central lubrication. The Jung has been mechanically and electrically checked by us. Take advantage of the opportunity to view and test the Jung on site under power. Further surface grinders from well-known manufacturers can be found on our website.

Year of construction: 2018, condition: excellent (used), Drilling machine with coordinate deduction system, little use, fully programmable. Specification: Model: APOLLO TRAP + SPEEDY Serial no: T6104130618 Year: 2018 Force: 3.4 KN Weight: 620 kg Kdjdpspcgybjfx Anwjn Made in: Italy If you have more questions, we will be happy to answer them.

Condition: good (used), Coordinate grinding machine Jig grinding machine Brand: Henri Hauser SA. Kedpfx Aektkmvjnwsdn Model: 3.S.M.O. Serial No.: 76 No.: 218···600 FAGOR 2-axis height display. Machine Type: Jig Grinding Machine Control Type: Conventional X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding diameter: 220 mm Table top: 600 x 320mm Neckline: 310mm Angle Range: 12° Grinding carriage adjustment - vertical: 110 mm Lifting speeds: 0 - 6 m/min. Grinding spindle speed: max. 50,000rpm Peripheral speed: max. 35m/sec Maximum weight of the piece on the table: 80 kg.

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Kdsdpjvvldusfx Anwsn Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: Kjdjx D Uqispfx Anwodn - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, overall weight: 8,000 kg, inner dimension height: 600 mm, workpiece weight (max.): 20 kg, turntable diameter: 400 mm, The described shot blasting machine is designed for the automatic blasting or peening with selected media shots in accordance to the final finishing result to achieve. Kdodpfx Anowdgrzowen Part to be blasted will be positioned on suitable pieces’ holders that minimized the shadowing of the contact areas parts/jigs. The parts are inserted and extracted by an automatic cycle into the blasting/peening zones, by means of a step-by-step conveyor that can also operate in continuous mode. The parts, after passing through a neutral zone, are blasted / peened in the subsequent zones, prior unloading the parts are also blown. The system is equipped with one (1) loading/unloading position to allow easier loading/unloading during the process cycle Once the piece has been loaded with operator or automation, the cycle starts and the conveyor process a step forward, allows the newly loaded piece to enter the cabin and the simultaneous arrival of an already processed part at the unloading station. The machine works with masked times, therefore all the positions of the satellites equipping the conveyor are occupied in the cycle time, when fully operational. In the inner positions of the cabin the satellites rotate, and the shooting guns jets the blasting/peening media with a correct impact angle as from appropiate design.

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Kjdpfx Anjwdfyqjwodn Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; These plants are fit for the treatment with aqueous detergent solutions, as: Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Condition: good (used), Quick-release clamping device, quick-release clamp, drilling device, drill bushings -Drilling jig: as a quick-clamping device for flat material -Transport box: incl. Kjdpfx Anogw Ilrjwsdn -Drill sleeves: Ø 12 mm, spacing 100 mm -Dimensions: 1900/150/H60 mm -Transport box: 2040/225/H280 mm -Weight: 70 kg

Condition: used, Jig boring mill, fine boring mill, plate boring mill, bench boring mill, boring mill, milling machine, row drilling machine, multi-spindle head, drill, drilling tool, reamers, quick-change tapping chucks -Extensive range of tools: for drilling/reaming/thread cutting Kedpfx Aefngw Uonwodn -Content: see pictures -Tool cabinet: 7 drawers -Dimensions: 720/720/H1000 mm -Weight: 454 kg

Condition: new, Universal bending machine UB-100 Eccentric quick clamping Readable bending angle up to 120 degrees Weight 35 kg Standard accessories: Infinitely adjustable bending stop Eccentric quick release Angle stop Lever and bending jig Material stop Kdodsga T Hvopfx Anwen Cold bending: - Flat steel 100 x 5 mm - Square steel 16 x 16 mm - Round steel 18 mm - Angle steel 60 x 8 mm Hot bending: - Flat steel 100 x 15 mm - Square steel 30 x 30 mm - Circular steel 30 mm - Angle steel 100 x 12 mm

Condition: good (used), Quick-release clamp, quick-release chuck, drilling jig, machine vice, drill press vice -Clamping surface: 65 x 35 mm Kedpfob A R Ehex Anwedn -Clamping height: max. 40 mm Price: per piece -Quantity: 2 available -Dimensions: 120/80/H70 mm -Weight: 1.5 kg

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N Kjdpfjxvbu Eox Anwodn load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gasnozzle sensing, seam tracking, point editor, CTMS, Manax C bow construction for robot in a fixed position Ksdpfx Anow R T Twowedn Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !!

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning Kdodpfxjxvbw Hs Anwjn 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Kdjdpfxjur H Ehe Anwsn Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm Kodpfxsu Aqz Ao Anwodn - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 1606, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 780 mm, controller model: GE FANUC 11, drilling depth: 60 mm, TECHNICAL DETAILS Table length: 1,100 mm Table width: 842 mm Max. workpiece weight on table: 1,500 kg Travel X-axis: 1,000 mm Travel Y-axis: 700 mm Travel Z-axis: 780 mm Drilling capacity in steel: 60 mm Spindle taper: ISO 4 B Spindle diameter: 135 mm Quill stroke (Z-axis): 300 mm Boring diameter min.: 60 mm Boring diameter max.: 300 mm Distance table to spindle: 1,000 mm Clearance between columns: 1,100 mm Number of spindle speed steps: 18 Max. spindle speed: 3,000 rpm Table feed rate up to: 6,000 mm/min Number of feed steps on drilling spindle slide: 6 Rapid traverse table longitudinal: 6,000 mm/min Rapid traverse table cross: 6,000 mm/min Rapid traverse vertical: 6,000 mm/min MACHINE DETAILS Control: GE FANUC 11 Connection: 50 Hz 3x 380 V Spindle drive power: 9 kW Dimensions & Weight Dimensions (L x W x H): 3,280 x 2,335 x 3,205 mm Approx. machine weight: 10,600 kg Kedpfx Aoyhnihjnwsdn

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, For sale: Hauser coordinate grinding machine, model S35-400 The machine is in excellent condition and underwent a partial overhaul in 2024 for €15,000. The machine is equipped with 6 high-quality grinding motors, a face motor, and turbines. TECHNICAL DATA Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Maximum taper grinding: 16° Table size: 600 x 380 mm T-slots: 6 units, 10 mm width, 50 mm spacing Table load capacity: 300 kg Speeds and Tool Holders Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm C-axis: 0 - 5 rpm X/Y feed: 0 - 1,200 mm/min W-axis feed: 900 mm/min Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measuring accuracy: 0.001 mm Base deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ System pressure: 5 bar Footprint: 3.5 x 4.4 m Machine height: 3.5 m Connection value: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction unit - Very high-quality accessories included Transportation and loading can be arranged across Europe at extra cost upon request. Prices plus VAT. Viewing by appointment is possible. Contact us—our team is happy to assist you. Kdodowtqthspfx Anwsn Trade-in or exchange possible! MACHINE PROCUREMENT / SALES PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 120 rpm, table length: 550 mm, table width: 320 mm, spindle mount: MK 2, total height: 1,500 mm, total length: 1,400 mm, total width: 2,100 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 3,000 rpm, drilling capacity: 75 mm, distance between stands: 600 mm, spindle motor power: 551 W, For sale is a Hauser brand coordinate drilling machine of type OP3 The machine is ready for use and fully functional Technical data: HAUSER OP3 coordinate drilling machine Kdedpevzrx Nofx Anwon Table: 550 x 320 mm Longitudinal travel: X-axis 400 mm Cross travel: Y-axis 250 mm Vertical travel: Z-axis 400 mm Cone in the spindle: MK 2 Drilling capacity in steel: 20 mm Stroke of the drilling spindle Z-axis: 130 mm Bore diameter: max. 75 mm Distance from table to spindle: 600 mm Spindle speeds: infinitely variable: 120- 3000 rpm Feed rates: Drill spindle slide: Number (steps) 2, 0.03 mm/rev 0.06 mm/rev Spindle motor: 0.75 HP Machine weight: approx. 1500 kg Dimensions: 1400x1500x2100 Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website