Iseki SXG 19 ride-on mower (bottom dump) - mower 1.32 m - with ICE Fighter (winter service) electric pump - hand lance and additional 10.0 m hose on automatic reel looks well suited for residential areas.
The Iseki can be retrofitted with snow blade or sweeper
Wood chipper TS Industries Tünnissen WS/16-35 DT, year of construction 2014, 393 operating hours, 3 cylinder Kubota Diesel 25,35 kw, up to 16 cm material diameter, with manual and 4 new spare blades, ser.no.145088
all stainless steel
net belt length 10.000 mm
net belt width 600 mm
dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm
extra infeed belt
thermal power 560 kW
suitable for thermal oil heating
with top hold down belt
sediment removal system
oil circulation pump
OMRON touch screen control
Oil drum filter
Power: 3 x 400V, 50Hz, 0.12kW
Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm
2 pcs. Oiltank
Type Oil hold tank
Content: 2.500 L
Dimensions: Ø1300 x 34... more
ISEKI TH 4260 AHL
Municipal tractor with winter service equipment
1. vario snow blade with maximum 175cm clearing width - new
2. 200l rear mounted - spreader - new
This ISEKI TH 4260 is year of manufacture 2009, has only 1,198 operating hours according to the meter and is in a well-kept overall condition with the usual signs of use and wear of this device class!
- Visiting / test drive gladly possible
- Shipping can be organized nationwide, the costs depend on the distan... more
Make Siebtechnik gmbh , Type TS 360 EK, No 4940, New 1997, Material Stainless steel 1.4571 (316Ti), Decanter , Screw diameter /Trommel dia.360 mm, Screw length / Trommel lengte 2020 mm, Motor 15 KW, 575 Volt 60 Hz, Max. rotor speed 4000 rpm, Floorspace 2,3x1,6 M, Total height 1,2 M, Weight 1750 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect o... more
Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor
-Speed 13.5 m / min
-0.12 kW drive
-Belt width 400 mm
-Feed length 1500 mm
-Transport dimensions 1550/760 / H200 mm
-Weight 98 kg more
Hydraulic guillotine shear
Fab. Hartmann guy. TS 40-08
All information without guarantee.
The machine was only used in a single shift at a facade builder in thin sheet metal and serviced by the manufacturer. A demonstration under power is of course possible. The Hartmann company comes from Germany (Frankfurt area). Today Hartmann has specialized in the repair and service of sheet metal working machines. more
Make Jesma Matador AS, Type TS 160, [...] 25.04, Material Stainless steel, Horizontal conveyor screw (1x), Diameter 160mm, Length 1500mm, Shaft diameter 75mm, Pitch 150mm, Inlet 160x160mm, Outlet 300x160mm, With adjustable packing glands , Motor 1,1 KW, 230/400 Volt, With covers , New 1995, Floorspace 2,2x0,8 M, Total height 0,8 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination world... more
Double miter saw, table saw
-2 x saw Wegoma TS 250
-Saws individually or simultaneously controllable
-Saw blade Ø 250 mm
-Saw motor 0.75 kW
-Dimensions 850/790 / H1660 mm
-Weight 234 kg more
Switch cabinet, control cabinet, double switch cabinet
2-fold switch cabinet RITTAL, bayed cabinet system
Type: TS 8208
Cabinet width: 2400 mm
Cabinet depth: 820 mm
Cabinet height: 2350 mm
Cabinet width inside: 2300 mm
Cabinet depth inside: 720 mm
Inside cabinet height: 1900 (without mounting support below)
Cabinet height: 2350 mm (with plinth and superstructure)
Cabinet height: 2250 mm (without superstructures)
Plinth height: 230 mm
Door opening per side H x W: 1900 x 1100 mm
- Double c... more
Make Ceram [...] Saint-Cannat France, Type TS-4 Centrifugal sifter, New 1998, Material Stainless steel, Rotating sieve (1x), Sieve sizes dia. 135x750mm, Inlet dia. 45mm, Outlet fines dia. 35mm, Outlet coarse dia. 140mm, Motor 0,75 KW, 220/380 Volt, Speed ± 625 Rpm, With sieve cage , Sieve perforation ± 5x5mm, Mounted on wheels , Floor space 1,7x0,8 M, Total height 1,2 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are rea... more
welding current - continuous: [...] A
Length: 900 mm
height: 1200 mm
total power requirement: 13,8 kVA
weight of the machine approx.: ca. 180 kg
space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m
MIG MAG Welding device -welding transformator as spare part donor
- capacity 40A/15V up to 400A/34V
- open circuit voltage -58V
- characteristic constant
- protection type IP23
- isolation type F
- water cooled
Circuit board A5 missing! more
Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door
-Profile door KTS for cooling unit
-TS single door 600 x 2000 RAL 7035
-Article No .: 5050154
-Dimensions 2040/645 / H90 mm
-Weight 33 kg more
Hydr. guillotine shear LUTHER type TS-S20-4
machine No. 320581 Year of construction 1971
cutting length 2030 mm
Knife length 2050 mm
Cutting thickness 4 mm for steel
cutting thickness 3 mm for stainless steel
Cutting angle 1.5°
Working height 750 mm
Drive power 15 kW
Power supply 400 Volt, 50 Hz
- Manual cutting gap adjustment
- Crosscut fence left 1200 mm length
- Backgauge 1000 mm motorized adjustable
- mechanical counter for the stop dimension
- Table support lined with plastic for... more
Max. cutting length: 3000 mm
Max. plate thickness: 6 mm steel
Motorized backgauge with digital display up to approx. 1000 mm, fine adjustment via handwheel
Cutting length adjustable via potentiometer
Operation via hand switch or foot switch
Cutting edge lighting
Side stop and table extensions
Weight approx. 7200 kg
Make Ceram [...] Saint-Cannat France, Type TS-4 Centrifugal sifter, New 1998, Material Stainless steel, Rotating sieve (1x), Sieve sizes dia. 135x750mm, Inlet dia. 45mm, Outlet fijn dia. 35mm, Uitlaat grof dia. 140mm, Motor 0,75 KW, 220/380 Volt, Speed ± 625 Rpm, With sieve cage , Sieve perforation ± 5x5mm, Floor space 1,7x0,8 M, Total height 1,2 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any... more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.