Used Internal Grinding Device for sale (21,353)

Condition: used, Year of construction: 2020, GS International 10t Bj 2020 Width Length 12 mtr Rcjdpfx Ameznfduokod Hydraulic adjustable Immediately available If you are interested in our loading bridge, we can arrange transport for you.

Condition: used, Year of construction: 2003, max. grinding length 2000 mm max. grinding width 1000 mm max. working height with new grinding wheel 600 mm Rjdpfx Amozn Imxekecd max. workpiece weight 3200 kg max. table load 4500 kg Clamping area 2860 x 1000 mm Grinding spindle drive 26 kW Spindle speeds 1000 - 3000 rpm Transverse feed rate 1 - 5000 mm/min Vertical feed rate 1 - 5000 mm/min Smallest programmable value 0.001 Cooling unit Mechanical extraction system Paper band filter system Grinding wheel balancing system Pneumatic folding dresser Control system ABAMATIC 1 N.D.

Condition: used, Year of construction: 1988, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Rodpfx Amjzmy Thokscd Control Kelco weight of the machine ca. 4 t

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t max. ram stroke 1000 mm max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1x1x2,2 m Rcjdpoy Ty Afefx Amked

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Rsdsnxi Uujpfx Amkscd Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Rodpfx Amonxi R Uskecd Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: used, Year of construction: 2000, grinding length 300 mm grinding width 500 mm Rsdszpf Ucopfx Amkjcd

Condition: good (used), Year of construction: 1989, ELB HK-Orion Precision Surface Grinding Machine A high-quality, robust horizontal surface grinding machine from the premium brand ELB-Schliff. Rcjdeznt Hdopfx Amkod This machine is ideally suited for workshops, toolmakers, and demanding users who require absolute precision in surface grinding. Equipment & Condition: Electromagnetic chuck: Fully functional, including the associated 130V DC control system operated via the control panel. Coolant system: Separate, external settling tank including a functional coolant pump and return chute. Operation: Clear, swiveling control panel for managing axis movements. Technical Data Manufacturer: ELB-Werkzeug- u. Maschinenbau Machine No.: 20600 Operating voltage: 3x 380 V / 50 Hz (three-phase current) Rated current / Fuse rating: 20 A / 25 A Control voltage: 220 V / 24 V Magnetic chuck DC voltage: 130 V / 4 A Year of manufacture: 08/1989 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm • Center height: 225 mm • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: Rcsdpfjt N Ivcox Amkjd • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest • Resolution: 0.0001 mm • Polygon grinding • Static balancing unit • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Year of construction: 2007, condition: used, machine/vehicle number: 203229 0807, This G-H grinding machine, a CNC surface grinder, model FS 420 SC, is being auctioned off online as part of our industrial auction / machinery auction due to the closure of the J&S GmbH Automotive Technology - BGA - workshop, including workshop equipment, tools, storage equipment, materials, office furniture, and canteen equipment. You can find this and many other items on our platform. Rcodpszp Dfasfx Amksd

Condition: used, This G-H grinding technology – CNC surface grinding machine, model: FS 640 SD – will be auctioned online as part of our industrial auction / machinery auction due to the closure of the J&S GmbH Automotive Technology location – including workshop equipment, tools, storage equipment, materials, office furniture, and canteen equipment. Rodpjzp Dd Asfx Amkscd You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, table length: 900 mm, table width: 300 mm, Travel distances: Rcsdoznly Nopfx Amksd Travel – X: 500 mm Travel – Y: 350 mm Travel – Z: 400 mm Grinding wheel: 400 x 50 x 127 Table size: 900 x 300 mm Installation dimensions: approx. Width: 2500 Depth: 2000 Height: 2100

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Rcedpfxjcnw U De Amkod Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rcjdpfxecqy I So Amkjd Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Travel ranges: Travel X: 1000 mm Travel Y: 600 mm Travel Z: 400 mm Table size: 1100 x 600 mm Grinding wheel: 400 x 50-100 x 127 Installation dimensions: approx. Width: 3300 Depth: 2320 Height: 2660 Rsdpsznlnmofx Amkecd

Year of construction: 1988, condition: used, machine/vehicle number: 01910/88, Floor sanding machine, Eugen Laegler Type: Vibrafor Motor power: 1.1 kW Voltage: 220 V Vibrating sanding surface Dust bag Rjdpfx Amecb Au Sokecd Location: 54634 Bitburg – can be inspected.

Condition: used, machine/vehicle number: 4/14242, Frank floor grinding machine FSR, used Motor power: 0.75 kW Voltage: 230 volts Rjdpfxeb Auu Rs Amkscd 5 amps, 50 Hz Machine number: 4/14242 Dust bag Location: Available in Bitburg warehouse

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Rcsdpfxsy A Tpqo Amked Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Designed for professional structuring and sanding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Infinitely variable feed rate Infeed height remains constant Models str l with infinitely adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Redpfx Amjff Hdiokocd Unit for saw-cut appearance available as an option Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle without extraction) 65 dB(A) Sanding unit Sanding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Year of construction: 2022, condition: as good as new (ex-display), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal "Tested for wood dust according to BGI 739-1". YOUR ADVANTAGES Rsdpfx Amodqzhbekscd Accessible from 4 sides Can be loaded with up to 150 kg Manual, tool-free height adjustment with scale Recessed longitudinal sides for edge grinding Workpiece-friendly beech wood grating (removable) Funnel-shaped air duct to the extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle 140 / 160 mm Required extraction capacity 1,500 m³/h Negative pressure at the nozzle at 22 m/s 1,000 Pa at DN140 mm 700 Pa at DN160 mm Adjustable working height from 735-1,015 mm Working area (W x L) 946 x 1,500 mm Dimensions (W x L) 1,000 x 1,600 mm Weight approx. 73 kg

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Rodpocdy I Refx Amkscd Exhibition model - Immediately available Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Rcodpfx Amjcnw T Ijksd Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: new, Year of construction: 2026, MBSM 150-20 For grinding surfaces, edges, and for rounding High-torque motors with vibration-free operation to achieve the best grinding results Working height adjustable by stepless tilting of the grinding unit Workpiece support adjustable in angle Continuous flat grinding surface allows grinding of even long workpieces One dust extraction port each on the spark guard and on the rear band roller Protective cover can be folded away Quick belt change in seconds thanks to the quick-release system Simple adjustment of the belt path via adjusting screw Motor with brake and safety switch Dimensions and weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Rcsdpfohk Df Dsx Amkjd Dust extraction Nominal size of dust extraction port, external 60 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idle, without dust extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Grinding belt length 2000 mm Grinding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: excellent (used), Double grinding wheel stand Rema / Schulmaschine Wheel dimensions (in mm): 300/40/76 Power (in kW): 1.8 Speed (RPM): 1450 Voltage: 380 Volt Lamp Protective shields Location: Available from stock in 54634 Bitburg Redpfshaf Ndox Amkscd - immediately available -

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Diameter range: 99 mm - 153 mm Height range: 28 mm - 250 mm Production capacity: up to 160 - 200 pieces per minute (c.p.m.) Rcsdpezkqwlsfx Amked Number of heads: 4 Extended lid feeder Stainless steel