Used Induction Heating Device for sale (27,381)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Gedpfxjxqxt Ij Afijkd Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: new, Year of construction: 2025, functionality: fully functional, ASB length stop with digital display Measuring range: 1,000 mm / 1,500 mm / 2,000 mm / 2,500 mm / 3,000 mm ... up to 6,000 mm Gkjdpoxu Iaxsfx Afiod Manual length measuring device with battery-powered digital display and fixed end stop. Right-hand mounting (left-hand option available) Measuring accuracy: ±0.1 mm Total length: Measuring length + 350 mm LCD display permanently integrated Display powered by batteries with an approximate service life of 1,000 hours in continuous operation Minimal installation effort required Freely configurable set values Switchable between absolute and relative measurement modes

Condition: good (used), Year of construction: 1997, Measuring device for determining the amount of gas in the insulating glass Dimension: Length: 280mm Gedei Azc Aepfx Afijkd Width: 204mm Height: 180mm Weight: 5.7kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm Gkjdpfx Aew Izrcjfiod - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: ready for operation (used), Year of construction: 2000, Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible. Godpfjxuvnwjx Afiskd

Condition: good (used), Year of construction: 1991, Total output: 22 kW Operating voltage: 380 V AC Operating current: 46 A Frequency: 50 Hz Pneumatic pressure: 4 bar Gksdpfsxr Au Sex Afisd Water pressure: min. 3.5 bar

Condition: new, Zimas P100-1050 - Workshop press with folding device - Passage: 1050 mm - Capacity: 100 to. - incl. 4-fold die and bending tool Specifications: Pressing force - Pressing force: 1000 kN - Max. pressure: 289 bar - Piston stroke: 300 mm - Downward speed: 10.5 mm/s - Working speed: 2.7 mm/s - Return speed: 15 mm/s Godpju Tvf Sjfx Afiokd - Passage: 1050 mm - Table dimensions: 1030 x 460 mm - Table height adjustment: 600 mm / 5 steps - Fence adjustment: 400 mm - Punch Ø: 110 mm - Guide piston Ø: 60 mm - Motor power: 7.5 kW - Supply voltage: 400 V - Dimensions WxHxD: 2000 x 2150 x 900 mm - Weight: 1970 kg

Condition: excellent (used), Year of construction: 1976, centre height 76 mm centre distance 190 mm spindle bore 21 mm Gkedpju Twcljfx Afied taper MK 3 weight of the machine ca. 40 kg dimensions of the machine ca. 720 x 210 x 215 mm

Condition: repair required (used), Thermal Binding Machine PLANAX COPY BINDER 2 Needs repair: Error code AC13. It is a mechanical fault. A motor continues to run (although it should stop) after the binding process. The heating circuit appears to be functioning correctly. Sheet capacity: 5 – 330 sheets Format: Mainly up to DIN A4 (according to binding strip length) Machine dimensions approx.: 355 × 588 × 283 mm (D×W×H) Gksdpsxuicujfx Afiod Weight: approx. 21 kg Power supply: 230 V, 50 Hz, 400 W Warm-up/binding time: Previous model: Warm-up time approx. 6 min; Operating temperature approx. 143°C Materials & consumables: Uses Copy Strips – thermal binding strips made of 100% linen structure, available in various widths and colors. Manual unfortunately not available. Price negotiable. Offers are welcome.

Condition: new, Year of construction: 2025, combustion chamber power: 175 kW Working power: 140 kW Diameter smoke outlet: 200 mm Hot air delivery pipes: 1 x 500mm Firebox length: 950 mm Firing chamber width: 600 mm Firebox height: 860 mm Air delivery : 8900 m³/h Power consumption : 3500 W designed for room volume : 3000 m³ Gksdpfoi Hplrox Afied area to be heated: 500/600 m² furnace height without hot air conveying pipes: 2200 mm Furnace width: 930 mm Furnace length without flue gas fan: 1700 mm Weight: 615 kg

Condition: used, Year of construction: 2006, The Neolt FT250 Manual Foam Trim Pro 250, manufactured by Neolt in 2006, is a machine with a format of 2500 mm currently in stock and located in Germany. This machine comes with a fixing bar and stand, offering a cutting width of 98 inches. It can handle a maximum cutting thickness of 30mm for foam and 3mm for Forex. The delivery terms are FCA. Format: 2500 mm Max. Size: 250 cm Net Weight: 70 kg Measurements: 280 L 33 W 120 H Gkjdpjvfx Dmefx Afied Equipment: with Fixing Bar and Stand 98 in Cutting Width, 30mm FOAM and 3mm FOREX Max. Cutting Thickness

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Gksdpfx Afoxp H S Aeijd Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: Gedpfx Afsxg Hrksijkd - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: as good as new (ex-display), centre height 130 mm Gkedpfx Aeuvd Axefied spindle bore 18 mm ratio 40:1 swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 35 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Gsdjwhzg Uspfx Afiokd Location: Nattheim

Condition: like new (used), PIOVAN granulate dryer, as new, only 5,000 operating hours, with conveying unit Gkedpfx Afextitqjisd

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: Gkedpjvfxqyofx Afied 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: Gksdpfxeu Rwauo Afiod - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Condition: new, Year of construction: 2022, functionality: fully functional, clamping range: 38 mm, 2 x Reishauer clamping units, base chuck FK 38, suitable for Reishauer gear grinding machines, compatible with spindle for RZ 150 / RZ160 / RZ 260 machines. Clamping diameter 38 mm. For max. speed n = 3,000 rpm. Balanced. Features clamping stroke monitoring / 3-point seating control and provision for additional functions: clamping / air supply monitoring / clamping stroke supervision. Includes assembly and operating manual as well as Reishauer wooden transport container. Price / further details on request. All technical data subject to errors/mistakes. We sell exclusively to countries within the European Community. Gksdpfx Afswzkcxeijd

Condition: used, Year of construction: 2000, GEA Happel - Ziehl Abegg Industrial Warm Air Heater / Fan M532C.DJ12 We are offering this industrial heater. ⭐︎ Condition: used, as shown in the photos ⭐︎ This unit, which we recently dismantled, was in perfect working condition up until removal. Gedpow Eu Dujfx Afiskd Dimensions: 100 x 900 x 800 mm (L x W x H) ⭐︎ Additional technical data: see photos. Scope of delivery as pictured – will be delivered as shown. All our items are dismantled, cleaned, and visually inspected for damage by our company’s qualified personnel prior to sale. For all relevant item data/information, please refer to the description and photos. All information has been provided to the best of our knowledge. The offered item is sold as described and as inspected. 2 units available Price is per piece #Shelf 4.5.7 Shipping possible, but buyer pays shipping costs. *Collection preferred* International buyers welcome – please ask for shipping rates to Europe and overseas.

Year of construction: 2017, condition: like new (used), MMM Uniclean® PL II 15 single chamber washer-disinfector (Mint condition, year of manufacture: 2017) Product description (Source: MMM) Powerful single-chamber washer-disinfector for thorough reprocessing of large quantities of medical devices such as general surgical and MIS instruments, anesthesia materials, ophthalmic and dental surgical instruments, containers, bowls, trays, surgical shoes and other utensils. Godpfx Asimdtvsfijkd Operating convenience Loading baskets can be conveniently loaded from all four sides. Easy-Move casters: Even heavy baskets can be moved easily with little effort and positioned precisely in the chamber. Glass control panel - easy to clean Rubberized CoolTouch handles allow even hot baskets to be touched. Frame and front panel made of stainless steel 1.4301 (AISI 304) Chamber and all fixed piping in contact with the product in AISI 316L Glass doors in double glazing with securized glass Glass panel with integrated 5.7" color touch screen on loading side Large residual run indicator and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL ( = Electric, not external steam) Single or double door: Double door Voltage: 380 - 400 V / 50 Hz Heating: Electric Equipment Machine Deionized water preheating tank (tank 1) Deionized water recovery tank Sound insulation machine front (tank 2) Sound insulation front of machine Sound insulation side wall Exhaust air economizer Exhaust air draft breaker Conductivity measuring system Monitoring Hepa-Filter Potential free contacts Return air locks Median connection on site Hot water connection Dosing system Suction lances 3 pieces 3. dosing pump incl. accessories Roller conveyor Semi-automatic transport Basic module Automatic roller conveyor Automatic loading roller conveyor preparation Automatic unloading roller bank preparation Batch documentation and machine connection Barcode reading system UPL II (cable) Barcode reader for basket recognition For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: like new (used), operating hours: 5,000 h, PIOVAN granulate dryer, 100 liters Gedsxtitkjpfx Afiskd

Condition: used, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21130 Specifications: Year of manufacture: 1999 Capacity: 13 t/m Crane diagram Grab included New control console Very little use Description: Gksdpfx Ajw Rah Ijfied Palfinger 13 t/m crane from 1999.Comes with grab. Equipped with a new control console and has seen very little use.Has been in storage for several years, so some refurbishment should be expected.Ready for delivery. Own weight: 111 Model: PK 13000

Condition: used, Year of construction: 2016, Serial number: 50xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18254 Description: Solid Gantry crane from 2016 , previously used in railway projects.Equipped with four hooks , each with a lifting capacity of 10 tons , and designed for precise and heavy handling. The crane is delivered fully loaded on a truck , ready for transport.Shipping costs apply.Ready for delivery at short notice. Gkodpfovg Nx Dsx Afied Own weight: 115000

Condition: used, Year of construction: 2016, Serial number: 50xxxx Gksdpfx Aevg Rkhjfiod Please contact ATS Norway for more information Please provide reference number upon request: 18255 Specifications Gantry crane: Model year: 2016 Type: Gantry crane for railway Rail type: A100 Height to main hook: 11.9 metres Lifting capacity: 4 x 10 tons Total weight: approximately 131,865 kg Span length: 5.5 + 31 + 8 meters Delivery: Ready for delivery at short notice Description: Powerful Gantry crane from 2016 , previously used in a railway context, for sale.The crane has four hooks with a capacity of 10 tons each , and is ideal for heavy lifting and precise handling of large items. The crane is delivered fully loaded on a truck , ready for transport. Shipping costs are additional.Can be delivered quickly by arrangement. Total Weight: 131865