Used Indexing Device for sale (13,305)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone. Lsdpfx Aowc Nvgoa Esta

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test Ledpfexmv H Rex Aa Esta - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Ltjdex Dm Rzopfx Aa Eea Length: 950 mm Width: 700 mm Height adjustable: 700-1380 mm Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable.

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 Ljdpfxsu Nuycs Aa Esta (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: like new (used), Year of construction: 2010, functionality: fully functional, You are planning to expand your central drying system but do not want to incur the high costs associated with original manufacturers. We are pleased to offer you a cost-effective and technically reliable solution for this purpose. Your in-house electrical engineering setup allows SIMAR conveying separators to be flexibly integrated with any existing control system. All that is required for commissioning is the control signal “Convey Start” (valve closed) – afterwards, the conveying process will run automatically. The units have been operated exclusively in a cleanroom environment with PP material (without glass fibers) and are therefore in excellent condition. 44 SIMAR conveying separators – from cleanroom production near Stuttgart. Features: • With machine hopper • Some units equipped with shut-off valves Lodewub E Rjpfx Aa Eota • All devices made of stainless steel If you wish to purchase a device, the price is €485 each. This includes hopper, valve, magnets, and more! If you purchase all 44 units, the package price is €21,500 including transport within Germany. If you pick up the equipment yourself, we can offer a further price reduction! This is definitely worth taking a look at!

Condition: good (used), Price plus VAT. Included in this package: 1 x slide-through protection Tegometall 2.700mm Manufacturer: Tegometall Condition: used, good condition length: 2.700 mm colour yellow Ltsdpfsg S Uxmox Aa Eja mounting: to hang in

Condition: excellent (used), Instron Instron 2663-822 Standard Video Extensometer (SVE) Non-contact strain measurement system for materials testing machines Description: The Instron 2663-822 Standard Video Extensometer (SVE) is a non-contact optical measurement system for precise detection of strain during tensile, compression, and flexural testing. Using contactless measurement via digital image processing, markers on the specimen surface are tracked—completely without mechanical influence on the test results. Ideal for applications where traditional contact extensometers (e.g., with blades) are unsuitable, such as with thin, sensitive, or elastic materials. The SVE is compatible with Instron materials testing machines and can be integrated into the Bluehill software (depending on system version). Special features: - Contactless strain measurement – no impact on the specimen - High resolution and measurement accuracy - Ideal for retrofitting older Instron systems - Low-maintenance and robust for laboratory use Technical specifications: Feature / Specification Measurement principle: Optical, contactless strain measurement Fields of view (FOV): 50 mm / 100 mm / 200 mm / 350 mm / 500 mm Resolution: - 50 mm FOV: 3 µm - 100 mm FOV: 4 µm - 200 mm FOV: 5 µm - 350 mm FOV: 25 µm - 500 mm FOV: 50 µm Measurement accuracy: - 50 mm FOV: ±5 µm or ±0.5% - 100 mm FOV: ±7.5 µm or ±0.5% - 200 mm FOV: ±10 µm or ±0.5% - 350 mm FOV: ±50 µm or ±1% - 500 mm FOV: ±100 µm or ±1% Lsdpfx Ajxvxwkoa Eeta Data rate: 50 Hz Recommended markers: Dots approx. Ø 2 mm (at 50 mm FOV) / Lines approx. 1 mm wide Gauge length: Depending on the field of view, e.g., minimum 5 mm with 50 mm FOV Application range: Tensile, compression, and flexural tests under ambient or temperature-controlled conditions Power supply / interface: Via Instron system controller (compatible controller required) Reliable & durable: Proven Instron model 2663-822 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications, subject to change and error!) We are happy to answer any further questions by phone.

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Motor output 5,5 kW Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm Ltjdsxzuxnepfx Aa Eja

Condition: new, Year of construction: 2022, functionality: fully functional, clamping range: 38 mm, 2 x Reishauer Clamping Device Base Unit Basic Chuck FK 38 Lsdpfx Aaswzkcxo Eota new - unused suitable for Reishauer gear grinding machines, fits spindle for machines RZ 150 / RZ160 / RZ 260 clamping diameter: 38 mm for n max. = 3,000 rpm balanced with clamping stroke monitoring / 3-point position control and provision for additional functions: clamping / air supply monitoring / clamping stroke monitoring incl. mounting and operating instructions as well as Reishauer wooden transport container Price / details on request All technical details subject to errors and omissions. We sell exclusively to countries of the European Community.

Condition: used, length 800 mm width 500 mm Ltjdpfxetv Icuo Aa Esa height 1000 mm weight of the machine ca. 1,1 t 2 units - Weight approx. 550 kg/each

Condition: like new (used), operating hours: 5,000 h, PIOVAN granulate dryer, 100 liters Ledpfx Aasxtitkj Eota

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate Ljdpfxevyq Duo Aa Esta -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: excellent (used), Trumpf Type: TruPulse 44 Trumpf laser device with laser light cable and KLH cooler Laser device TruPulse 44 Electrical power at nominal laser power on the workpiece 2.0 kW Power 2.0 kVA Current at 230 V 9.0 A Consumption data Maximum power consumption (e.g. service case) Electrical power at nominal laser power on the workpiece 2.5 kW Power 2.5 kVA Current at 230 V 11.0 A Network design! Electrical connection values Mains 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) at nominal power (total power factor) 0.88 Insulation resistance 400 kOhm Pre-fuse 16 A Laser device dimensions Width 485 mm Depth 800 mm Height 700 Laser device weight 1.5 kN (150 kg) distributed over 4 castors Cooler: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant R134 a / GWP 1430 Tank 1.80 kg Power supply 3 x 400 V Frequency 50 Hz Rated current 4.5 A Connected load 1.8 kW Ljdpfx Aaev Hnz Do Eeta Dimensions Length 650 mm Depth 650 mm Height 1100 mm Weight 190 kg Weight: 340 kg Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2010, functionality: fully functional, new container with completely new layer PU-cover with ca. 6mm cover thickness usable volume: 165 liter trough inner measures: 1100mm x 460mm x 525mm empty weight: ca. 850kg motor speed: 1500 rpm sound insulating cabinet Ltodpfxjt Ahqys Aa Esa extern dimensions: 1900mm x 1250mm x 1550mm band filter device Seitz

Condition: used, functionality: fully functional, 2 double-flank rolling testers / 2 devices Measuring device for gears for the inspection of gear teeth (for simple and fast inspection of gears) Double-flank rolling device for measuring gears, used special test equipment for final inspection. 2 double-flank testers for final inspection, for fast and easy detection of runout or damaged areas (knockers) on the tested workpiece. Electromotive drive, partially with clamping device Double-flank inspection "Price / details on request" All technical data subject to change/errors. Ltedpfjhaqumsx Aa Eoa We sell exclusively to countries of the European Community.

Condition: used, machine/vehicle number: 15037991278R / 1407713xxxx, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 18748 Specifications: - 2015 model - Type: SEHK300 - Slightly used - Remote control with bluetooth - Lifting capacity: 30,000 - Ready for delivery Description: 2015 Suxxesion pipe spreader in good condition. Flies with a number of pipes and extra equipment (see pictures). Ready for delivery. Ltjdpfxevgyd Ro Aa Eoa   Own weight: 1 Model: SEHK300 rørløfter

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter Lodpfx Ajwiwnqja Eeta

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Lsdpfx Asxxmf Ioa Eota Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle Lodpfsxg Hrkex Aa Esta - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2001, condition: good (used), bar diameter min. 18mm / max. 63mm Lsdpfx Aei Dagcoa Esta bar lenght min. 1000mm / max. 4200mm

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Model turning device, height-adjustable with electric feed motors, completely overhauled. The pictures show a comparable machine; color and feed options are selectable. Ltjdpfex E Dbcex Aa Esa

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Ltodpfx Aoxtwxuoa Esa

Condition: excellent (used), Year of construction: 2019, liter capacity 300 l Ltsdpsxxmncofx Aa Eoa feed pressure 18,5 bar coolant capacity 2800 l Filter capacity 1,5 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: excellent (used), Year of construction: 2013, liter capacity 300 l feed pressure 18,5 bar coolant capacity 2800 l Ltodpfx Ajxxmm Soa Eja Filter capacity 1,5 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l feed pressure siehe Plan bar Ltedjwgizwopfx Aa Eea coolant capacity 2900 l Filter capacity 6 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m