Used Immersion Coolers for sale (1,485)

Condition: new, New - Lowara DOC Pump Suitable for clean and dirty water applications such as Cellar or Basement drainage or small sumps. With channel impeller and can be supplied with or without float switch. These pumps have thermal overload protection in case of dry-running and overheating. Hsdpfxsrupn Do Ah Hefp The DOC7 range has a 1 1/4" BSP Female discharge. General Specification of DOC Range: Delivery - 14m3/h flow rate 11m maximum head 3 Phase or 1 Phase 50/60 Hz Power 0.25 kW to 0.55kW 5m maximum immersion depth Temperature of pumped liquid - 0°C to 40°C DOC3 DOC7 up to 10 mm max suspended solids DOC7VX up to 20mm suspended solids Insulation class B IP68 rated 10m cable length supplied with Pump

Condition: used, This listing is for a Julabo FL1201 Recirculating Cooler. The unit is in full working condition and is ready for immediate release. The recirculating coolers of the FL Series are suited for a wide range of cooling tasks:- Up to 20 kW of cooling capacity- Easy access filling from above- Feed pressure indicator (from FL1201) and level indicator- Large compensation volume- Permissible return temperature up to +80 °C- May be used with water, water-glycol, Thermal bath fluid Order No: 9 660 003 Model: FL1201 Working temperature range °C: -20 ... +40 Temperature:±0.5 Hodpfxexv Ar Ss Ah Hsfp stability °C: Pump capacity Flow rate / Pressure: l/min: 23 bar:1 Filling volume liters: 12 … 17 Dimensions cm: 8W × L × H,50 × 76 × 64

Year of construction: 2010, condition: like new (used), Used Trumpf Trubend Series 3000 CNC pressbrake for sale VIDEO BELOW: Used Trumpf Trubend 3120 for sale 3metre x 120ton 6 axis plus pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3120 Type: CNC hydraulic Press Brakes New 2010 Location: United kingdom Low hours – 14,000 Specification Convert Specs to Imperial Tonnage 119.749 t / 120ton Type: hydraulic downstroke Overall Length 3.1 m /3metre BH 2.7 m Stroke 199.9 mm Number of axis: 7 axis 5 axis back gauge Weight 18298 (LBS) Control CNC (T3000) Hfsdpjhtm Ikofx Ah Hop 132 Ton X 10′ Trumpf TruBend 3120 CNC Press Brake Year: 2010 Specification from new: Machine – Stable machine frame as welded all-steel construction – Ram, highly resistant to torsional forces – Spherical ram suspension, with ram tilt – Electro-hydraulic downstroking drive with 4-cylinder technology – Proportional valve technology – Modern block hydraulics – Electronic pressure balance – Measuring system with glass scale and frame deflection compensation – Hydraulic oil filled in the machine (lifetime lubrication) – Oil cooler Backgauge System – Backgauge system 2-axes with rack and pinion-drive for X- and R-axis, – 2 pieces back gauge fingers with safe adjustment in front of the machine Tool Holder – TRUMPF Upper tool clamping, manual and hardened – Lower tool clamping, manual and hardened Crowning – Self-regulating crowning system – Additional hydraulic CNC-crowning Control – Machine control: T3000 colour, DELEM based on Real Time for Windows – USB interfaces for keyboard, mouse, etc. Safety – Footswitch for Emergency up, down and emergency stop – Safety equipment: Side doors and manual shutter roller at the rear Services – Installation, start-up and instruction Options for Backgauge System – Back gauge system 5 axis Options for Tool Holder – Amada US Style fast clamping of upper tool holders (segmented, on entire working length) Options for Safety Device – BendGuard Options for Material Handling – Support bracket (2 pc) Delivery – June 2011 Video below: Used Trumpf V and C series cnc pressbrakes also available in stock for sale. We are always interested in buying used Trumpf pressbrakes and machines such as: TruBend 3066 TruBend 3100 TruBend 3170 TruBend Series 5000 TruBend 5085 Trubend 5130 TruBend Series 7000 TruBend 7050 TruBend 7036 TruBend 7050 TruBend Series 8000 TruBend 8230 Trubend 8400

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2530 mm Measurements depth 2100 mm Control Unit Brand MITSUBISHI Model M70 Main Drive Spindle speed range 15000 RPM Number of axis 3 Media Main electronic connection 15kVA Additional Equipment Hfedjxwqudspfx Ah Hjp Spindle cooler (oil/air) External cooling External compressed air cooling External minimum lubrication Pendant Air gun Cooling water gun Oil skimmer This 3-axis Akira Seiki PC700HSC was manufactured in 2017. It features a working range of 700mm x 400mm x 330mm, a BT30 spindle taper, and a maximum speed of 15,000 RPM. The machine includes a 21 ATC changer, Mitsubishi M70 control, and rapid traverse of 40m/min. Consider the opportunity to buy this Akira Seiki PC700HSC vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), Year of construction: 2022, operating hours: 6,000 h, machine/vehicle number: 006424, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, This very young baler is sold by Bollegraaf Recycling Solutions. This is a HBC100 (75kW) baler featuring cross wires, FULL HARDOX, and a Bollegraaf chain conveyor with Bordoflex. Both the chain conveyor and the baler are equipped with all possible options for maximum efficiency in baling all types of plastics. Both units were built in 2022 and have very few operating hours. The previous owner purchased a new Bollegraaf system and traded in the machines in question. After disassembly, this baler is sold with a 3-month warranty. HBC100K Baler (75kW) 390mm supports Intermediate hopper Conveyor chute Platform with caged ladder Additional photocells Frequency controller for the main motor for energy savings Hfodpfx Ahjxvh Ewe Hsp APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) Cross wires (3 horizontal wires and 5 vertical wires) Full Hardox lining inside the baler Bale exit Hydraulic lifting mechanism for both knotting sections for improved accessibility/maintenance Bale length display Air conditioning on the control panel Chain conveyor frequency controller Hydraulic oil heater Hydraulic unit cooler 4G modem for remote support Chain conveyor Bollegraaf HBT 1200/1800*20400 Equipped with Bordoflex for extra chain protection Dirt discharge plate Supports Chain lubrication

Condition: good (used), mileage: 453,152 km, power: 375 kW (509.86 HP), first registration: 09/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,730 mm, total width: 2,550 mm, total height: 3,770 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, traction control, = Additional Options and Equipment = - 2nd diesel tank - Digital tachograph - Electric mirrors - Tachograph (control device) - Fixed - Hydraulic system - Alloy wheels - PTO (power take-off) - Pump - Sleeper cab = Notes = Number of axles: 3, Configuration: 6x2, Total tank capacity: 575 liters, 2nd diesel tank, fifth wheel height: 119 cm, fifth wheel: fixed, number of differentials locks: 1, alloy wheels, suspension type: full air suspension, cab type: sleeper cab, cruise control, tachograph (control device), digital tachograph, air conditioning, auxiliary heater, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, lighting: xenon lamp, lane departure warning system, air conditioning, seat heating, Bluetooth, flashing lights, engine power: 375 kW (503 hp), fuel: diesel, Euro: 6, transmission type: I-Shift, transmission manufacturer: Volvo, gears: 12, power steering, ABS, ASR, hydraulic system, PTO (power take-off), PTO type: 1, starter battery, pump, central locking, seating arrangement: 1+1, seat upholstery: fabric, seat adjustment: electric, LAST AXLE STEERING / BIG HYDRAULICS WITH OIL COOLER = Further Information = Transmission Hfsdexvxiaopfx Ah Hsp Transmission: VOL, 12-speed automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tyre size: 385/65R22.5; steered; left tyre tread: 9 mm; right tyre tread: 9 mm Axle 2: Tyre size: 315/80R22.5; twin tyres; left inner tread: 3 mm; left outer tread: 4 mm; right inner tread: 4 mm; right outer tread: 5 mm Axle 3: Tyre size: 385/65R22.5; lift axle; steered; left tyre tread: 5 mm; right tyre tread: 5 mm Functional Pump: yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing rate: €819 per month (default, 60 months); Please ask for further information and conditions Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years of manufacture, and price classes. Why buy from Kleyn Trucks? It’s simple! • Large, fast-moving stock • Recognized quality • Competitive pricing • Professional business conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates quickly arranged • Expert technical services • The security of recognized quality • And more…. Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: good (used), Spiral Cooler with Refrigerated Chiller Room Hodon Tmh Sopfx Ah Hofp In good working condition Chiller Room dimensions 5.4mtr x 4mtr Spiral Cooler 660mm wide wire mesh belt 13 floors high, 170mm high between floors Complete with refrigeration compressor. In use at present

Condition: excellent (used), Autotherm Here we offer you a 6-circuit temperature control device. Without active refrigerating machine! According to the enclosed technical brief description: Temperature range: -40°C ... +85°C (extended temperature range -40°C...+130°C) increased heating power 27 kW instead of 18 kW with 1x temperature control included in the main line with 6x temperature measurement in the respective flow included with 6x temperature measurement in the respective return included with 6x volume flow and pressure measurement in the respective flow included with 6x volume flow and pressure control included 1l/min ... 12 l/min and 0.1 bar ... 3 bar incl. release control incl. FU-controlled pump in the main line incl. 6x 3-way valve with 6x additional overflow valve 2 ... 12 bar adjustable included preset to 2,4 bar with filling and draining device included for all circuits together/simultaneously incl. 50l integrated tank incl. pneumatic emptying function with control S7 incl. included Energy saving and cooling capacity extension: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range from +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity at a flow temperature of +20°C: 50 kW. This increases the cooling rate in this temperature range and saves energy due to the lower running time of the refrigerant compressor. (Footprint of the basic unit according to data sheet increases by approx. 0.3 m²) Assembly in Rittal bayed control cabinet: 2x TS8 800x1000x2000 mm 1x additional, closed switch box min. 600x600x2000 mm (for control/electrics) Supplied via on-site or optional cooling medium supply Flow temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h continuously controlled For cooling capacity a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Hfsdjkn Nilspfx Ah Hsp Sale ex location! Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Eos Type: EOS M270 Metal laser sintering system Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Hedpfx Asu Ebpcoh Hofp Usable build volume: 250 mm x 250 mm x 215 mm (incl. build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner System was upgraded to Scanlab hurrySCAN 30 for a more precise print image Focus diameter 100 μm Dimensions (W x D x H) System: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Julabo Type: PRESTO W80t Refurbished! Working temperature range -80 ... +250 °C Temperature stability ±0.01 ... ±0.05 °C Heating power 3.4 kW Pump power flow rate 0 ... 40 l/min Pump power delivery pressure 0.1 ... 1.7 bar Refrigerant information Hfjdpfx Ahevwch Ts Hsp Refrigerant R507 R23 Filling weight 720 g 500 g Cooling water temperature range 10 ... 15 °C Cooling water differential pressure 1.5 ... 6 bar Cooling water consumption 2 l/min Pt100 external sensor connection integrated Second external Pt100 sensor connection accessories Integrated programmer 8x60 steps Temperature control ICC Absolute temperature calibration 3-point calibration Temperature display 5.7" TFT Touchscreen Temperature setting touchscreen Total dimensions (W × D × H) 43 x 65 x 126 cm Condition: used Weight approx. 170 kg Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) Further questions can We will be happy to answer your questions over the phone.

Condition: excellent (used), Weiss temperature chamber Hodjp Dun Aepfx Ah Hjfp Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temperature deviation in time in the center of the chamber ± 0.1 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Heat compensation max. 2750 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27,0 kW Rated current 42,02 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 960 kg Type: WT11-1000/70/5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Sentek Type: L1024m with PA115 Technical data: Sine Max (kgf / N): 1,000 / 9810 Random force rms (kgf / N): 1,000 / 9810 Shock force (6 ms) kgf: 2,000 / 19620 Usable frequency range Hz: 5-3500 Continuous movement test pk-pk mm: 51 Shock displacement pk-pk mm: 51 Max speed m/s: 2 Max acceleration sine peak m/s²: 980 Shaker: Shaker head diameter mm: 240 Anchor insert pattern PCD mm plus 1 in the center: 8-100 / 8-200 Thread M10 Resonant frequency ±5% Hz: 3050 Max load capacity kg: 200 Natural frequency of the shear axis Hz: < 5 Stray flux density Gauss: < 10 Weight kg: 1150 Dimensions (W x D x H) mm: 884x890x841 Amplifier Dimensions (W x D x H) mm: 580x850x1800 Amplifier Weight Uncrated kg: 290 Cooler Type: VAPE500/P2 Dimensions (W x D x H) mm: 620x710x1120 Weight kg: 120 Total weight approx : 1540 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Hedpfsr A Ezzox Ah Hofp We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss temperature chamber Here we offer a Weiss temperature chamber. Hfodpfep Dun Uox Ah Hep Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -40°C to +180°C Temperature deviation in time in center of chamber ± 0,1 to ± 0,5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Heat compensation max. 4500 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11,5 kW Rated current 22 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 840 kg Type: WT11-1000/40 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2018, condition: excellent (used), EFD Type: MINAC 6/10 SM Heat treatment The compact design of the Minac induction heating system allows for easy installation and offers fast, concentrated and controlled heating with full repeatability. repeatability. Medium frequency product line Technical data: Maximum output power 10 kW Continuous output power 6 kW Mains voltage 400-480 V Frequency range 10-25 kHz Control range of output power 2-100% Recommended back-up fuse 16 A Cooling water approx. 4 l/min Cooling water flow temperature min./max. 18 - 35°C Cooling water pressure min./max. 4 - 6 bar Weight approx. 50 kg Hfedpot Din Ajfx Ah Hop Dimensions (WxDxH): 345 x 708 x 453 mm Year of construction: 2018 optris CTlaser infrared thermometer Abbreviation: 3ML Measuring range: 50 to 400 °C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature control ECU 1214C Hyfra eChilly water cooler 4-S Cooling capacity 4395W The device comes from the laboratory sector. Only a few operating hours. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), EOS Type: P385 similar to a P390 Laser has been renewed and is unused! Plastic laser sintering system for the direct production of series, spare parts, functional prototypes and samples for investment casting or vacuum casting. Machine description: Condition of the machine/system: Dimensions: System P385 (dimensions 2000x1220x1250) Cooler (dimensions 930x610x600) Control panel (dimensions 1580x950x800) Control cabinet (dimensions 2100x610x950) Technical data: Effective construction volume 340 mm x 340 mm x 620 mm Construction speed (depending on material) up to 31 mm/h Layer thickness (depending on material) 0.06 – 0.10 – 0.12 – 0.15 – 0.18 mm Support structure not required Laser type CO 2 , 50 W Precision optics F-Theta lens Scan speed up to 8 m/s Power supply 32 A Maximum energy consumption 10 kW / typically 2.4 kW Integrated nitrogen generator (optional) Compressed air supply at least 5,000 hPa; 6 m³/h Voltage: 3/N/PE/ 400 V AC Frequency: 50/60 Hz Modified surface module from a heated nitrogen flood Connection value: 12 kW Hedpfsubxkmox Ah Hjfp Rated short-circuit current: 5 kA Fuse: 3x 32 A Current consumption: 18 A Max. laser power (10.6µm) 100 W Laser class open 4 Laser class closed 1 Weight: approx. 1,060 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a 3DMICROMAC laser marking system microCUT Enclosure Laser source IPG Raylaighs-3 axis scan system Power sensor 1 Power sensor 2 Camera system for positioning Camera system for quality inspection Cooler Suction Control cabinet with IPCs Distributor Cooling media Hfodofgbt Eopfx Ah Hop Machine dimensions: Machine weight: 2 tones width 922 mm, depth 4653 mm, height 2925 mm Components: Suction: height 2869 mm, width 760 mm, depth 1577 mm cooler: height 1697 mm, width 1440 mm, depth 860 mm Weight (without filling) 500kg Laser rack: height 1786 mm, width 856 mm, depth 806 mm Weight 500kg Switch cabinet: height 2001 mm, width 1616.05 mm, depth 605 mm Machine connections: Electrical: mains voltage 3*400 VAC/N/PE Mains power consumption 74A Frequency 50/60Hz Power consumption 51,3kW Control voltage 24/5VDC Main fuse NH 100A gG Mudule: Laser source: mains voltage 400 VAC Frequency 50/60Hz, power 16.7 kW, current consumption 59A Cooler: mains voltage 400V, frequency 50/60Hz, current consumption 40A Machine: Consumables Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid state: Class 1 Oil. Class 1 Water: Class 4 Residual oil content ᐸ 10µg/m³ Water content ᐸ 6 g/m³ Pressure dew point 3 °C Consumption ᐸ 120 l/min Cooling water cooling unit modules: Temperature cooling water outlet 21°C Temperature cooling water return 26°C Setpoint tolerance 1K Cooling water flow 69l/min Free pump pressure 1.5 bar DI water cooling unit Temperature cooling water outlet 26°C Temperature cooling water return 31°C Setpoint tolerance 1K Kühlwa [...]

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P385 The EOS P385 system includes the following Installation space container Powder container Cooler: Termo TEK Termochiller 1100 The following upgrade has already been performed : Software: CD's Eosint P3 process software PSW 3.2 for Windows 2000, XP Hodof Ey Eaepfx Ah Hsfp Materialice: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser change 15.05.2008 X Drive Motor. Change of used engine 04.05.2020 Pyrometer change 30.06.2020 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V A, frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT Upgrade P385 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Bitzer Here we offer you a refrigeration unit. Was built but never used Starting current (rotor blocked) 135/220 A Supply voltage 400/3/50 V/Ph/Hz max. operating current 53 A max. power consumption 30.1 kW delivery volume: 101.10 m³/h (HD) 50,50 m³/h (MD) Motor (nominal): 30 HP 22 kW Oil filling BSE32 Option: BSE55 at R134a, tc > 70°C Oil quantity 4,75 l Refrigerant R452A Reverse osmosis filter and humidification system included Hjdpfxehwmtve Ah Hofp Reverse oasmosis data: Permalefficiency 10 l/h Feed water requirement 40 l/h Operating pressure 14 bar Dimension: 500*600*295 mm H*W*D Type: BS6 S6F-30.2Y-40P + Bitzer condenser water cooled K573H + RO20 Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser beam source with KLH cooler The Trumpf TruDisk 4002 laser beam source is an industrial disk laser source (disk laser) from TRUMPF, characterized by high power, beam quality, and efficiency. It is frequently used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of a beam source with associated cooler, but without optics and fiber optic cable. Technical Specifications Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10% ... 460 V +10%, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical Features: Water-to-water cooling Precise temperature control (typically 20–25°C) Refrigerant: R 404A Hfjdpfowh Rnzjx Ah Hjp Can be controlled via TRUMPF interface Required to comply with laser specifications Device Type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Trumpf Type: TruPulse 44 Trumpf laser device with laser light cable and KLH cooler Laser device TruPulse 44 Electrical power at nominal laser power on the workpiece 2.0 kW Power 2.0 kVA Current at 230 V 9.0 A Consumption data Maximum power consumption (e.g. service case) Electrical power at nominal laser power on the workpiece 2.5 kW Power 2.5 kVA Current at 230 V 11.0 A Network design! Electrical connection values Mains 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) at nominal power (total power factor) 0.88 Insulation resistance 400 kOhm Pre-fuse 16 A Laser device dimensions Width 485 mm Depth 800 mm Height 700 Laser device weight 1.5 kN (150 kg) distributed over 4 castors Cooler: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant R134 a / GWP 1430 Tank 1.80 kg Power supply 3 x 400 V Frequency 50 Hz Rated current 4.5 A Connected load 1.8 kW Dimensions Length 650 mm Depth 650 mm Height 1100 mm Weight 190 kg Hfsdpfjv Hnz Dex Ah Hjp Weight: 340 kg Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Perkin Elmer Type: Optima 7300 V Spectrometer Perkin Elmer ICP-OES Optima 7300V with cooler and S10 autosampler The optical system of the Optima 7300 V enables simultaneous measurement and coverage of the entire wavelength range (UV and visible). More than 73 elements can be measured in seconds to achieve exceptional sample throughput, and all raw spectral data is stored with full reprocessing capabilities. This allows sample results to be evaluated under different processing conditions, reducing the need for re-sampling and saving time and money. The Optima 7300 V was specifically developed for the special challenges of oil sample analysis and the analysis of special metals in laboratories and offers the following features: Classic vertical burner configuration with radial view Problem-free sample feed system Proven high-performance optical system Robust solid-state generator Two models available: oil version for oil analysis and HF version for geochemical and high-solid analysis Technical data: Hfodpfx Ahsv Hzpue Hjp Ultraviolet wavelength range from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Dimensions 150 x 76 x 89 cm (W x H x D) Power supply 200-240 V, 20 A line, single-phase, 50/60 Hz Maximum power 2800 VA Connection current 15 A Circulation cooler PolyScience Recirculator N0772025 Mains connection 200-240 V 50Hz Weight: 200 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Hedpfx Asu Ebt Uoh Hefp Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley Hfsdpfx Ajft R Swoh Hop 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Here we offer an Eos EOSINT plastic laser-sintering system. The following things are included in the EOS P380 system Construction space container Powder hopper Overflow container Cooler: Termo TEK Termochiller type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin Hjdpegqux Nsfx Ah Hsfp 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse protection 32 A MAX. Laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a SmartPower 210/1330 thermoset machine. Wittmann Battenfeld injection molding machine with control UNILOG B8 Machine was serviced / checked by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021. checked and updated to the latest possible status Within the scope of the complete inspection, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already existing pressure switches, the plant offers the possibility to the possibility to install additional cavity pressure switches (2 pieces Kistler module for cavity pressure changeover, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the cavity pressure switch upgrade are included in the scope of delivery. Hfodpefphtvofx Ah Hsp Injection moulding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main machine dimensions Noise level (DIN EN ISO 3744-46) 65 dB(A) Ambient temperature +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours of 1437 hrs. Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max (HLP 32) min 30°C (86°F) / max 40°C (104°F) Oil temperature min / max (HLP 46) min 40°C (104°F) / max 50°C (122°F) Switch-on temperature for oil cooling (HLP 32) 35°C (95°F) Switch-on temperature for oil cooling (HLP 46) 45°C (113°F) Electrical system: Drive power, Hydra. Pump 37kW Motor voltage Frequency Screw barrel temperature 350°C (662°F) max. Water system: Oil cooler: Cooling water connection [...]