Used Hydromat 1000 for sale (8,497)

Condition: good (used), Year of construction: 2008, Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type SSK-B 1.0-2.10, lifting capacity 1000 kg -Base plate: 800 x 800 mm Lodeyn Ra Nspfx Aalshd -Load capacity: 1000 kg -Chain hoist: SWF type SKB 080.22-FND, year of manufacture 2008 -2x lifting speed: 4.0/1.0 m/min -Reach: 2100 mm -Total height: 2630 mm -Hook height: 1980 mm -Swivel range: 270° -Transport dimensions: 800/2640/H1500 mm -Empty weight: 458 kg

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with sliding carriage, maximum travel 500 mm -Depth adjustment: 0 - 6 mm -Drive: 0.5 kW Lhsdpfxsyn N Ilj Aalsd -Adjustable speed: 1200 - 8000 rpm -Angle: 45° -Accessories: Widia milling head, diamond grinding wheel, vacuum cleaner -Dimensions: 490/870/H1150 mm -Weight: 106 kg

Condition: ready for operation (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm Ljdoxn Tydepfx Aalohd throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm - in checked conditions - machinevideo - ?v=oV49fdNM8dg Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Condition: used, Year of construction: 1971, weight max. 1000 kg workpiece length . mm work piece width . mm Drive elektr. Ledpfjyuqdbjx Aalohd dimensions of the machine ca. 4,2x2,1x2,2 m

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Lodpfx Aaeyvqc Uoljhd

Condition: good (used), Year of construction: 2001, operating hours: 54,057 h, Manufacturer: HERMLE | Model: U 1000 T | Year of manufacture: 2001 | Operating hours: approx. 54,057 | Universal milling and drilling machine | CNC control (TNC 426) | Automated tool clamping | Precision motion guidance | Dimensions: approx. 3,600 mm x 2,450 mm x 2,800 mm (W x H x L) | The stated dimensions are approximate values. All other information provided without guarantee. | Grey | Steel Ledpfxjyic R Te Aalshd

Condition: good (used), Year of construction: 1997, functionality: fully functional, Powered and ready for demonstration ++++ SPECIAL PRICE €4,900 ++++ MACHINE PRICE EX-WORKS LOADED ON TRUCK Wemas VZ 1000, Lodpfeyvtbtox Aalehd year of manufacture 1997, Heidenhain TNC 407 control, travel X/Y/Z 1016/610/660 mm, 4th axis, Ihs Dmneyic U Eechqjw, tool changer for 20 tools, taper SK 40, spindle speed up to 6,000 rpm, table size 1300 x 600 mm, cooling system, high-pressure coolant (IKZ) defective, operating hours 43,000

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ledpfxou Ixt De Aalshd

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, controller manufacturer: SELCA, controller model: 3045, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Eikon VMC 1000 was manufactured in 2000. It features a 10,000 RPM spindle, a 20-tool changer, and X/Y/Z travels of 1000mm, 500mm, and 400mm respectively. Equipped with a Selca 3045 control system, consider the opportunity to buy this Eikon VMC 1000 vertical machining centre. Contact us for more information. Lodpfsycicxjx Aalohd • ATC capacity: 20 tool positions

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 Ljdpfxsyalpco Aaljhd • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Condition: ready for operation (used), Year of construction: 2014, operating hours: 54,454 h, screw diameter: 25 mm, This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. • Screw: 25mm • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 80 A • Heating rated current: 58 A • Total rated current: 138 A • Total connected load: 75 kW • Calibration year: 2027 • Optional: Geiger Handling Ledpex D Rcujfx Aalohd

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) Lhsdox D Hgvjpfx Aalod • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Year of construction: 2006, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with SIMODRIVE 611D, overall weight: 6,200 kg, number of axes: 2, Cylindrical grinding machine manufactured in 2006. This GEIBEL & HOTZ RS 1000 CU features a center distance of 1000 mm and a maximum swing diameter of 355 mm. It is equipped with an electromechanical X-axis and Z-axis, offering feed rates of up to 12,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 1000 CU machine we have for sale. Contact us for further details. Lhjdpsymn Ihefx Aaled • Current defects: • Measuring probe is defective • Switch in the coolant reservoir for controlling the pump is defective • Axis configuration: 2-axis (X, Z) • Center distance: 1000 mm • Center height: 180 mm • Max. swing diameter: 355 mm • Max. workpiece weight: 150 kg between centers; 60 kg in chuck (including clamping device) • X-axis: • Drive: electromechanical with ball screw • Feed rate: 0.01–8,000 mm/min • Measuring system: glass scale, 0.0005 mm resolution • Z-axis: • Drive: electromechanical with ball screw • Feed rate: 0.01–12,000 mm/min • Measuring system: rotary encoder, 0.001 mm resolution • Workpiece spindle: • Motor power: 2.0 kW • Speed: 0–1000 rpm • Taper: MK5 and KK5 (DIN 55026) • Grinding spindle: • Motor power: 9 kW • Speed: 1400 rpm • Grinding wheel size (standard): 500 × 80 × 203.2 mm • Bearings: precision rolling bearings • Lubrication: lifetime lubrication • Required space: approx. 3900 × 2450 × 1800 mm • Power supply: 400 V, 50 Hz, 3-phase • Control voltage: 230/24 V • Installed power: approx. 23 kW

Condition: ready for operation (used), Year of construction: 2011, operating hours: 68,463 h, screw diameter: 35 mm, This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, it's designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information. • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 61 A • Heating rated current: 58 A • Total rated current: 119 A • Total connected load: 78 kW • Calibration (year): 2027 • selection unit: yes • single platen: yes • beam spacing: 470 x 470 Ledox D Rndopfx Aalehd • Optional: Geiger Handling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm Lhodpfjyhbq Eex Aaljd • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,000 rpm, total height: 1,650 mm, overall weight: 1,200 kg, controller manufacturer: FAGOR, controller model: 8055tc, number of axes: 2, This Pinacho Smart Turn 180/42 1000 was manufactured in 2012. A robust horizontal turning machine featuring a turning length of 1000mm, spindle clearance of 42mm, and a turning diameter of 360mm. It includes an 8-fold tool changer and Fagor 8055tc control. Dimensions are 2.5 x 1.15 x 1.65 m, weighing approximately 1.2t. Consider the opportunity to buy this Pinacho Smart Turn 180/42 1000 horizontal turning machine. Contact us for more information. • Turning diameter: 360 mm • Turning length: 1000 mm • Tool changer: 8-fold vdi20 • Machine still under power • chuck: 200 mm in diameter. Lhodpfx Ajx D Ivfealjd Dimensions Machine Depth 2500 mm

Condition: ready for operation (used), Year of construction: 2022, operating hours: 7,500 h, Metal 3D printer manufactured in 2022. This TRUMPF TruPrint 1000 multilaser features two 200W fiber lasers, providing multilaser productivity with 7,500 operating hours per laser. It is designed for high-precision dental and medical components, utilizing Bego Mediloy S-Co (Cobalt-Chrome alloy). Consider the opportunity to buy this TRUMPF TruPrint 1000 multilaser metal 3D printer. Contact us for further details. • Lasers: 2 x 200 W fiber lasers (multilaser) • Laser operating hours: 7,500 h per laser • Build volume: 100 mm diameter x 100 mm height Lsdpfx Aoyifirsaljhd • Material used: primarily BEGO Mediloy S-Co (Cobalt-Chrome) • Applications: high-precision dental and medical components • Condition: well-maintained; operated in a controlled laboratory environment • Handover: machine handed over at the laboratory gate

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, table load: 700 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis Hartford LG-1000 vertical machining center was manufactured in 2017. It features a 1150x510mm table with a load capacity of 700kg, an ATC with 24 positions, and a spindle speed of 8,000 rpm. The machine includes a FANUC 0iMF controller and linear guide ways. If you are looking to get high-quality milling capabilities, consider the Hartford LG-1000 machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Very good condition, regularly maintained Technical Machine Benefits • Linear guide ways • Table dimensions: 1150 x 510 mm • Atc: 24 positions • High pressure cooling 20 bar • Renishaw omp40-2 workpiece probe • Renishaw ots tool probe Extra Information Lodjx D I I Ispfx Aaljhd Machine still under power Technical Specification Taper Size BT 40

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 320 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,000 kg, This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit. Machine Benefits Ljdpfxsyi Elij Aaljhd Qualitative Machine Benefits • Good condition Technical Machine Benefits • Distance between centres: 1000 mm • Centre height: 175 mm • Grinding wheel dimensions right Ø 400 x 50 mm • Grinding wheel head movements -210°/+30° • Rotational speed 8-800 rpm • Spindle type cm5

Condition: ready for operation (used), Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, injection weight: 132 g, overall weight: 3,650 kg, This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information. • Opening stroke: 500 mm • Platen size: 570 x 570 mm • Max. volume: 144 cm³ Lhsdpeyglrwjfx Aalsd

Condition: ready for operation (used), Year of construction: 2011, overall weight: 15,200 kg, This 3-axis KNUTH XMill 1000 TB was manufactured in 2011. It features a total power of 23.8 kW and operates on 400 volts with a frequency of 50Hz/3. Ideal for detailed vertical machining tasks. Contact us for more information. • Total power: 23.8 kW Lsdpfxex D Ruqs Aalehd • Voltage: 400 V • Frequency: 50 Hz • Phases: 3

Condition: ready for operation (used), Year of construction: 2000, number of axes: 3, This 3-axis KNUTH KB 1000 vertical machining center was manufactured in 2000. It features manual control over the X, Y, and Z axes, offering precise handling and versatility for various machining tasks. If you are looking to get high-quality milling capabilities, consider the KNUTH KB 1000 machine we have for sale. Contact us for more information. Lodpfx Ajyc Ucdsaljhd

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: SIEMENS, controller model: SIVATIC HMI, This WEMHÖNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÖNER Variopress Basic 1000S laminating press. Contact us for more information. Additional equipment • Including: 2 x paternoster magazines for film rolls Machine Benefits Ljdpfx Aaex D Hy Aslshd Technical Machine Benefits • Heating plate format (mm): 2850 x 1550 • Electric heating plate design: aluminum heating plate top • Total pressing force (kn): 2400 / chamber pressure max (bar): 6 / operating temperature max: 180 degrees celsius / batch or workpiece size max (mm): approx. 2460 x 1180 • Thermoplastic film in rolls, width of the film: approx. 1430 mm / thickness of the film (mm): approx. pressure chamber height (mm): max. Up to 180 • Connection values: installed power (kw): approx. 46 / required air pressure (bar): approx. 8

Condition: ready for operation (used), Year of construction: 2024, total height: 2,500 mm, overall weight: 3,700 kg, This laminating press was manufactured in 2024. It features a robust servo-hydraulic drive system and operates at pressures between 6-8 bar. With a substantial footprint of 1000 × 2500 mm and a working table size of 1500 × 1000 mm, it is ideal for panel processing and interior components. Consider the opportunity to buy this Other COMAG MPM 1500-1000 T6-E laminating press. Contact us for more information. • Pneumatics and hydraulics: • Operating pressure: 6–8 bar • Drive system: Servo-hydraulic drive Lodpfx Asyglkmsalohd • Electrical data: • Electrical connection: 3 × 400 V / 50 Hz • Number of phases: 3L • Maximum power: 30 kW • Maximum current: 100 A • Applications: • Laminating, punching, and edge folding of panels • Trimming and edge foiling of panels • Processing of armrests and central armrests • Production of railings, handles, back covers, and door handles • Typical use: Ideal for panel processing interior components; also suitable for the furniture industry Dimensions Machine Depth 2500 mm

Condition: used, machine/vehicle number: 14018, Rotor diameter: 500 mm Rotor width: 1000 mm Rotor knives: 5 x 2 Stator knives: 2 rows Lhodpfxjyr Tygj Aalod Infeed opening approx. 600 x 1000 mm Drive motor: 45 kW