Used Hydrogen Chloride for sale (76)

Condition: new, Year of construction: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can be amortized in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech. Nedpfxjwzv Hcj Agwokw

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. Nsdjwzv Hispfx Agwskw The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: new, Year of construction: 2024, New Aurepa ADR Trailer tank nitrogen, oxygen, argon, gas, cryogenics CRYOBASE tanker New trailer: Year of manufacture of trailer: 2024, made in Germany Nsdpfxot R R Uqo Agwskw All necessary documents are available Used tank: Working pressure: 3.85 bar Capacity: 2000 L Delivery is possible. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen, carbon dioxide, hydrogen, methane We would be happy to provide you with a quote or more information.

Condition: excellent (used), Year of construction: 1991, We can offer you CO2 carbon dioxide gas used storage tank vessel Volume 21050L; Working pressure 22 bar; Export from EU Nedjk Eac Dspfx Agwokw We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Technical data approx: - Gas transfer system for nitrogen , argon , forming gas , hydrogen - from plasma cutting system + flame cutting system make ESAB - mounted on stainless steel plate as shown - div . pressure reducer + separator - Weight approx. 80 kg - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m Njdpfsrf Uqzox Agwskw

Condition: excellent (used), Year of construction: 2011, LNG Methan Gas Cryogenic Semi-trailer INDOX Hersteller: INDOX Baujahr: 2011 Volume: 53 m3 Working pressure: 7 bar. Tare 15500 kg Pump Nsdswpulyspfx Agwokw Flowmetter We also have other tankers, tanks, vessels for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methanen, CNG Contact us for more information or a quote!

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Year: 2011 Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen We will be glad to answer your questions via Phone and E-mail Nkodpetulh Iofx Agwjw

Condition: used, Year of construction: 2019, Cylindroconical fermentation and storage tanks, standing on four feet, with a maximum operating pressure of 2.5 bar. The tanks are each equipped with frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap and temperature control. Additional title: vertical, coolable, stainless steel pressure tanks with temperature control Gross volume: 2500 l Operating pressure: 2,5 bar Operating temperature: 50 °C Height: 2800 mm Material: stainless steel 1.4301 (AISI 304) Position: standing on 4 feet Base construction: cylindroconical Nksdpfxexf D Iaj Agwew Features: cooling jackets, insulation (50 mm chloride-free PU foam) cleaning line, 2 outlet lines with manual valves, pressure gauge, bung apparatus, hose level indicator, temperature control, sampling tap

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Njdpexfcdysfx Agwjkw Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total height: 480 mm, 2 pieces Horizontal, cross-split volute casing pump in process design, with radial impeller, single-entry, single-stage, Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with sealing water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! Operating parameters are specified on the type plate. Not the actual flow rate at the best point !!!! I have stored 2 characteristic curves as a photo. Photo 11: Best point Photo 12: Operating parameters from last application Flow rate: 6.9 m³/h Delivery head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data operating point for last application approx. Flow rate: 2.2 m³/h Delivery head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Volute casing: Noridur 1.4593 Housing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency. IE 2 Voltage: 400/ 690 Volt Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process engineering industry Njdpfxjfyn Rpe Agwokw - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Year of construction: 1987, condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of construction: 1987 Pump speed of 1480 rpm is also possible! Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions Nodpfxsh S Nz So Agwokw - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully to the end !!! The pump is not suitable for: Water, food industry and non-corrosive media. For these media, cheaper materials such as 1.4408 or 1.4571 are more suitable. The pump is made of the special material Alloy 59 !!! This alloy is used when the corrosion resistance of conventional chromium-nickel steels is no longer sufficient. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: Environmental engineering, chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas) and waste incineration plants. 2.4605 is mainly used in the chemical industry, the pulp and paper industry and in flue gas desulphurization plants. Nsdpfoigqutjx Agwskw Excellent resistance to mineral acids such as nitric, phosphoric, sulphuric and hydrochloric acid and in particular to sulphuric/hydrochloric acid mixtures Typical applications are -plant components for organic chemistry processes with chloride-containing media, especially when chloride-based catalysts are used -Multipurpose plants in the chemical industry -Plant components in the fine chemicals and pharmaceutical industries scrubbers, heat exchangers, dampers, fans and agitators for flue gas desulphurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for marine diesel engines -components for seawater and concentrated brines -equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -sulphuric acid coolers -Pipelines in geothermal power plants -Components in flue gas desulphurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/ 690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 ( Alloy 59 ) NiCr23Mo16Al All ball bearings new, mechanical seal refurbished by specialist company. Weight: 121 kg Dimensions: Length 960mm, width 370mm, height 370mm Connection: DN 50 ( 2")

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Nodpfeiuznujx Agwokw Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 pieces of horizontal, axially split volute casing pumps in process design, with single-suction, single-stage radial impeller Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm The nameplate shows the latest operating parameters, NOT the pump’s best efficiency point! Best efficiency point according to pump curve: Flow rate: 14.5 m³/hour Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Operating point according to last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 Volts Speed: 1440 rpm Nkedpfsxp Eqkex Agwsw The material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process waters - Wastewater treatment plants/sewage treatment - Offshore and marine engineering

Condition: used, functionality: fully functional, The Terumo SCD IIB Sterile Tubing Welder, P/N 72508 provides reliable, high-quality welds for sterile tubing connections, completes a weld cycle in 30 seconds, is compact and portable, requires minimal technical training and can be implemented seamlessly into existing processes. Tubing requirements: Polyvinyl chloride (PVC) tubing with a nominal outer diameter of 5.46 mm (0.215 inch) and a wall thickness of 0.84 mm (0.033 inch) or C-Flex tubing with a nominal outer diameter of 6.35 mm (0.25 inch and a nominal inner diameter of 3.18 mm (0.125 inch). Nedpfx Agsuyu N Eowjkw Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Engineered for high efficiency, the Steris VHP-100R Desiccant Regeneration System, Model RG120 regenerates desiccants used in vaporized hydrogen peroxide (VHP) sterilization, ensuring consistent and reliable moisture control. The RG120 is designed to maintain optimal performance of your VHP sterilization equipment, enhancing overall process efficiency and efficacy. Its robust construction, user-friendly interface, and advanced regeneration technology make the Steris VHP-100R Desiccant Regeneration System an essential component for any facility relying on VHP sterilization for critical applications. Nkodpfsw Rg Etox Agwow Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), functionality: fully functional, Steris VHP 1000ED Biodecontamination Unit APPLICATION The STERIS VHP® 1000ED Biodecontamination Unit is designed for mobile biodecontamination1 of clean, dry, sealed enclosures2 such as isolators, chambers, and small rooms using STERIS's VHP process technology, featuring Vaprox® Hydrogen Peroxide Sterilant DESCRIPTION With its mobile design and multi-purpose features, the VHP® 1000ED is one of the most versatile pharmaceutical grade Biodecontamination Units on the market today. The Biodecontamination Unit uses STERIS patented VHP process technology. The process uses hydrogen peroxide vapor as a broad spectrum antimicrobial without condensation of active ingredient onto surfaces. This non condensation feature provides additional benefit of a wide range of material compatibility. The VHP® 1000ED Biodecontamination Unit Nodpfxjwqz Dls Agwjkw features easy operation with an easy to use operator interface and other key built-in design features like dehumidification, pressure control, Vaprox cartridge interface and aeration module for an All-In-One unit. Once the Customer cycle is selected, the control system automatically completes the desired biodecontamination cycle. Additionally, the VHP® 1000ED Biodecontamination Unit offers an impact printer for hard copy of the cycle data as well as a USB port for electronic biodecontamination cycle capture. The unit includes a connection kit with four (4) Banjo 1.25" couplings and 25 ft. (7.6 m) of tubing for connecting to enclosures or rooms Good working condition. Please check out our other listings as well.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. Njdexywupopfx Agwekw The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 11.825.150/ 08065 6, input voltage: 400 V, total width: 540 mm, total length: 960 mm, total height: 1,050 mm, overall weight: 196 kg, TECHNICAL DETAILS Stepless adjustment: 10-160 A Duty cycle: 100% at 160 A Connection voltage: 400 V, 3-phase, 50 Hz Connected load: 38 kVA Fuse protection: T 50 A "C" Gases Plasma gas: O₂, air, nitrogen, argon/hydrogen Swirl gas: N₂, O₂, forming gas F5 Marking gas: argon Njdpfx Agswyazhowokw MACHINE DETAILS Electrical Details Power supply: 3~ 50 Hz Input voltage: 400 V Input current: 47 A Dimensions & Weight Dimensions (L x W x H): 960 x 540 x 1,050 mm Weight: 196 kg

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. Nkedpfxofz Dwze Agwow The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, DESCRIPTION Njdpfx Ajfz I Nhjgwskw The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, DESCRIPTION Nkedpfx Aefz I Syjgwjw The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Nsdpfjfz I Uijx Agwskw Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel Nkedpfx Aofz Nakegwew

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Nodpjfz I Npefx Agwekw Rouezts The columns are made of AISI316L steel