Used Bhc for sale (24)

Condition: used, machine/vehicle number: 007729, X axis working area: 3250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22 Cu7Ofihl3K

Condition: reconditioned (used), Year of construction: 2010, operating hours: 24,170 h, Functionality: fully functional, machine/vehicle number: 0-250-21-1078, travel distance X-axis: 3,945 mm, travel distance Y-axis: 1,953 mm, travel distance Z-axis: 150 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 3,995 mm, feed length Y-axis: 1,976 mm, feed length Z-axis: 150 mm, controller manufacturer: Beckhoff, controller model: MCC, workpiece length (max.): 3,130 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 100 mm, total height: 100 mm, total length: 3,130 mm, total width: 1,250 mm, table width: 3,130 mm, table height: 1,250 mm, rotational speed (max.): 7,500 rpm, overall weight: 8,000 kg, spindle speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, distance between spindles: 32 mm, spindle motor power: 9 W, number of spindles: 12, number of slots in tool magazine: 16, tool length: 260 mm, tool diameter: 130 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, number of previous owners: 1, worktable length: 3,130 mm, drill spindle stroke: 60 mm, gear speed: 7,500 rpm, milling spindle motor power: 9,000 W, year of last overhaul: 2024, Equipment: milling spindle speed infinitely variable, rotational speed infinitely variable, Here we offer a Homag Weeke Venture 108 M for sale. The machine was dismantled by the customer and checked in my workshop, some necessary repairs were carried out. Paint damage was repaired and the inside of the table was completely painted. It is in no way inferior to a general overhaul. 12 years of IMA & 18 years of experience at Homag Bohrsysteme as a service technician worldwide characterize me. In 2023 the machine PC was renewed from Windows XP to Windows 10 and the Woodwop 8.0 version was installed. Two additional licenses for workstations are available. We are also happy to offer you the installation of the machine as well as repairs to your machines on site. Homag Weeke IMA. Loading, delivery, installation at cost or at a fixed price. Dqqfr2 Warranty is limited to mechanical components. Electrical/electronic components are excluded. We also offer annual maintenance. We also offer reconditioned tool change adapter units as good as new. Saw/lock box/ corner notcher/ key end trimming units/ swivel saw/ units on request. General overhauls of drilling gears and milling spindles on request and quotation. Machine relocations and complete overhauls. If you are interested, please contact us to discuss the details.

Condition: used, Year of construction: 2007, Working dimension X: 3.250 mm Working dimension Y: 1.250 mm Working dimension Z: 100 mm Number of milling spindles: 1 Main motor power: 9 kW Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 8 Fzjcsf8 Vertical drilling spindles: 11 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: 90° turnable Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Positioning aid: Yes Vacuum pump: Yes Capacity vacuum pump: 90 m³/h Special workpiece clamping system: For narrow workpieces Safety device: Safety mat Chip conveyor: Yes Crosshair laser: Yes Tool changing auxiliary device: Yes WEEKE Quality package: Yes Workpiece support aids: Yes Disc tool changer: Yes Control: HOMAG POWER CONTROL PC 85 Software: HOMAG WOODWOP 5.0 Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: good (used), Year of construction: 2007, Support table: 3250 x 1250 mm X-travel: 3860 mm Y-travel : 1822 mm Z1/Z2 travel: 325 / 185 mm Workpiece thickness: max. 125 mm X / Y / Z speed: 100 / 50 / 20 m/min X-travel distance suction nozzle: 4210 mm Tool holder: HSK F63 Number of tools: 8 (plate) Vertical drilling spindle: 19 pieces Horizontal drilling spindle: 6 pieces Drill holder: 10 mm Drill spindle holder: 20 - 35 mm Dqph3Z MACHINE DETAILS Loading dimensions: 5800 x 2300 x 2300 mm Operating voltage: 3 x 400 V Voltage: 50/60 Hz Rated current: approx. 35 A Total connected load: 18 kW Pneumatics: according to ISO 8573-1 Connection: R 1/2" Pressure: 7 bar Consumption: 100 - 200 NL/min

Condition: excellent (used), Year of construction: 2001, Used WEEKE BHC 550 - year 2001 - immediately available - working area 3200 x 1400 mm Ckzk8S79Ek - without tools - incl. one lock case unit - Tool changing stations 8 - drilling head - C-axis

Condition: good (used), CNC Weeke Type: Optimat BHC 550 Year of construction: 2005 CE Beivaay Machining dimensions: X 3250 mm, Y 1300 mm, Z 370 mm Workpiece thickness max. 100 mm Traversing speeds of the X, Y, Z axes 80/60/20 m/min. 18-position tool changer traveling in X direction The main spindle was replaced 3 years ago connected load 21 kW External dimensions L 6380 x W 3900 mm x

Condition: used, machine/vehicle number: 007566, X axis working area: 3250 mm Ukixroauud Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14

Year of construction: 2003, Condition: ready for operation (used), Main Drive Spindle speed range 1,250 - 24,000 Spindle motor power 12 kw Tool taper HSK F63 Movement X-Axis Movement 7250 mm Y-Axis Movement 1300 mmm Sbav3Sejtb Additional Equipment Automatic tool change magazines Vertical and horizontal drilling units Chip removal belt Vacuum pumps This woodworking center was manufactured in 2003. A robust Weeke Profi BHC 600, it features a powerful 12 kW tool change spindle and an automatic tool change magazine with 18 places. It boasts extensive capabilities with a working length of 7250 mm and width of 1300 mm. Ideal for complex woodworking tasks, the machine includes a vertical drilling unit with 26 spindles and two horizontal drilling units. For more information about this woodworking machine, please reach out to us. Application Types Wood Working

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, - Working dimensions: 3050x1300x70mm (X, Y, Z) - Main spindle: 6kW Br8Wddah3Z3 - Tool magazine: 6x space - Drill: 19V, 2+4H - Grooving saw

Condition: excellent (used), Year of construction: 2019, Konica Minolta BHC 3350i This is a Konica Minolta BHC 3350i photocopier in very good condition, with good copy quality and few prints. Counter: 21,440 copies (including 21,000 black & white copies and 440 color copies). Options: PCL / PS / Envoie / Paper feed unit with 1 cassettes. Technical data : Power supply 220-240 V, 50-60 Hz G0Ao3Oz CM SOLUTIONS is one of the French and European leaders in the purchase, sale and reconditioning of used office equipment. By integrating transparency, know-how and ethics at every level of our business, we offer our customers high-performance products at competitive prices. Why do our customers choose CM Solutions? - 28 years of international experience in over 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta... - A vast stock of 2000 copiers immediately available - A team of qualified technicians Please do not hesitate to contact us for further information.

Year of construction: 2002, Condition: ready for operation (used), Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW. Q3Obx

Condition: excellent (used), Year of construction: 2005, operating hours: 5,800 h, Functionality: fully functional, machine/vehicle number: 0-250-04-2333, travel distance X-axis: 3,310 mm, travel distance Y-axis: 1,735 mm, travel distance Z-axis: 220 mm, TECHNICAL DATA Table length: 2750 mm table width: 1050 mm Workpiece thickness: 100 mm X-axis: 3310 mm Y-axis: 1735 mm Z-axis: 220 mm Tool holder: HSK-F 63 Magazine: 8-position plate Unit: 2 spindles Drill: (6+4) x 32 X-axis speed: 60 m/min Y-axis speed: 50 m/min Z-axis speed: 20 m/min Standard compressed air quality: according to ISO 8573-1 quality class 3 Connection: R 1/2" Pressure in the supply line: 7 bar Compressed air consumption: approx. 100-200 l/min Suction connection: Ø 200 mm Height: 2110 mm Total extraction capacity: min. 3170 m³/h Air speed: min. 28 m/s Pressure loss: min. 2000 Pa MACHINE DETAILS Loading dimensions: 5400 x 2300 x 2400 mm Machine weight approx.: 3600 kg Protection class: IP53 Operating voltage: 3 x 400 Volt, ±5% Frequency: 50 Hz External power supply: 32 A Recommended fuse: 35 A Total connected load approx.: 17.5 kW FUNDAMENT Dpsx3N Surface pressure: in the area of the support points 1.2 N/mm² Floor covering: concrete quality B25, compressive strength ≥ 200 mm

Condition: used, machine/vehicle number: 006579, X axis working area: 3130 mm Y axis working area: 1250 mm Bfz27Mbfg7A Working Table: Pod and Rail Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 14

Year of construction: 2004, Condition: ready for operation (used), Main Drive Spindle speed range 1250-24000 Additional Equipment BASIS-table with 6 traverses Vacuum pumps (2x 100 m3/h) Multiple stop systems Beh93K3 18-fold tool holder LED positioning system side stop cylinder, pneumatically lowerable longitudinal stop cylinder, pneumatically lowerable Double centre stop lockable with 4 cylinders Separate vacuum clamping system (4 vacuum fields in X direction) Separate vacuum clamping system for the use of at least 8 workpiece supports with four-fold assignment This woodworking machine was manufactured in 2004. It features a robust CNC processing centre with a compact linear guide system and a ball screw spindle for precise X, Y, and Z axis movement. Equipped with a 9 kW milling spindle, adjustable from 1250-24000 RPM and a 360° positioning axis, it ensures versatile and efficient operations. The machine includes a 100 m³/h vacuum pump and an 18-fold tool holder. For more information about this woodworking machine, please reach out to us. Application Types Wood Working

Condition: excellent (used), Year of construction: 2005, CNC MACHINING CENTER WEEKE Type: BHC 280 Cbpoglcgyr Only 5.800 h - operating hours ! Woodwop 5.0 B.j 2005 4 axles

Condition: excellent (used), Year of construction: 2020, Konica Minolta BHC 360 This is a Konica Minolta BHC 360 photocopier in very good condition, with good copy quality and few prints. Counter: 114,000 copies (82,000 black & white and 32,000 color) Options: Internal finisher / PCL / PS / Send / Paper feed unit with 3 cassettes, one of which is large-capacity. Bluoaqjkfuo Technical data : Power supply 220-240 V, 50-60 Hz CM SOLUTIONS is one of the French and European leaders in the purchase, sale and reconditioning of used office equipment. By integrating transparency, know-how and ethics at every level of our business, we offer our customers high-performance products at competitive prices. Why do our customers choose CM Solutions? - 28 years of international experience in over 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta... - A vast stock of 2000 copiers immediately available - A team of qualified technicians Please do not hesitate to contact us for further information.

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, *Weeke Optimat BHC Venture 5L. 1 *Machine dimensions:*. - Length: 5100 mm - Width: 2100 mm - Height: 2600 mm - Weight: about 5000 kg 2 *Working area:*. - X axis: 3680 mm - Y axis: 1350 mm - Z axis: 300 mm 3 *Main spindle:*. - Power: 10 kW - Maximum speed: 24,000 rpm 4. *Tool storage:*. - Type: carousel - Capacity: 18 tools Sgsga72Eu9 5. *Control system:*. - Type: NC 1000 6. *Drill aggregate:*. - Number of vertical spindles: 12 (8 in X-axis, 4 in Y-axis). - Number of horizontal spindles: 6 (2 in X-axis, 4 in Y-axis) 7 *Additional equipment:*. - Circular saw unit: Yes - Vacuum table: yes - Software: WoodWop 8 *Power supply:*. - Voltage: 400 V - Frequency: 50 Hz - Power consumption: approximately 18 kW 9 *Other:*. - Vacuum system: Yes, with vacuum pump - Maximum thickness of processed material: 80 mm - Safety system: Protective guards, emergency button

Condition: good (used), Year of construction: 2003, machine/vehicle number: 0-250-02-2533, travel distance X-axis: 3,310 mm, travel distance Y-axis: 1,675 mm, travel distance Z-axis: 135 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 500 m/min, rapid traverse Z-axis: 22 m/min, nominal power (apparent): 14 kVA, total height: 2,200 mm, total length: 5,900 mm, total width: 3,800 mm, table width: 1,220 mm, table height: 920 mm, table length: 2,750 mm, overall weight: 3,150 kg, spindle speed (min.): 1,000 rpm, spindle speed (max.): 21,000 rpm, spindle motor power: 6,000 W, power: 14 kW (19.03 HP), 3 axis cantilever machine; - working table: X=2750 mm - 60m/min, Y= 1220 mm - 50m/min, Z=1350 mm - 20m/min - Traveling tool changer with 6 tool spaces (HSK 63F) - Water cooled spindle 6/4,5 (S6/S1) kW, max 21000 rpm - 11 vertical boring spindels, 6 horizontal (2x2 in X, 1x2 in Y) - Saw 120 mm in X direction - 6 traverses with suction pads - vaccum pump ELMO 100m3/hour - Software WOODVOP machine version Sfomqcnvut

Condition: used, machine/vehicle number: 006351, X axis working area: 4250 mm Ch9Zi2Besy Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 38

Condition: used, machine/vehicle number: 006151, X axis working area: 3100 mm Y axis working area: 1250 mm Cicg7Foqab Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 006558, X axis working area: 6000 mm Bfbcxdrcvye Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of tool changer positions: 28 Ch9Odg8Gpa

Condition: ready for operation (used), Siemens IBH - CPU 86/3 H1.1.034 L2 ref. no. 0398 E status 00 used good condition minor signs of wear 100 % functional Cq78Bibybi

Condition: ready for operation (used), Functionality: fully functional, NAPIWODA SAWMILL OFFERS Complete sawing line - debarking, sawing, sorting of lumber PRICE 800 thousand PLN, selling only as a whole with own disassembly. We offer training for operators and technical support. Complete sawing line - debarking, sawing, sorting lumber. Complete sawing line with log sawing capacity of 180 m3/shift Line in continuous use until the end of February 2025, from March disassembly can begin. A very versatile line that allows the use of any non-standard cuts including the production of lamellas for window joinery. The line was used in the past for sawing logs from 2.5m to 7.2m with a capacity of 70 m3/shift. Over the past few years, the line has been significantly expanded and optimized for 4m-long logs with diameters from 14 to 55 cm. Practical training in machine operation and maintenance is available. The line consists of 81 machines and feeders to produce edged lumber and paper chips. Age of machines from 2 to 30 years. Regardless of age, machines maintained in full working order. Main components of the line: 1. debarking machine Cambio 66 2. vertical sawmill FOD DTRB-63 3. vertical sawmill FOD DTRA-63 4. twin-shaft multi-saw Stravis PW20 5. two single-shaft multi-saws (edging machines) 6. main sawn timber stacker Bfzmxhhfiz3 7. side lumber sorting plant 8. chipping line with chipper Oska OKRR 550 9. sawdust extractors All machines are interconnected in one process line through roller, chain, vibrating and belt conveyors. The entire set of machines has documentation for review. We are only interested in the sale of the entire process line with disassembly on the buyer's side. Chtyupribw MORE PHOTOS AVAILABLE ON REQUEST FILMS: 1. youtu.be/LhgWeGcgucw 2. youtu.be/_fvThue55uQ 3. youtu.be/qVgbHcd2PBg 4. youtu.be/GpGVRmolWIU