Used Hydraulic Straightening Press for sale (25,628)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending. Cpsdsufhzvjpfx Afnsu Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc... (Note: The photo does not correspond to the original image)

Condition: excellent (used), functionality: fully functional, RÖCHER conversion 1991 (formerly SCHÖN) Pressing force: 1,600 kN Ram stroke: 160 mm Table dimensions: 850 x 650 mm Light curtain control system Next mandatory inspection: February 26 Clamping pin lock in the ram Rapid approach speed: 274 mm/s Working speed: 20/10 mm/s Return speed: 273 mm/s Drive power: 30 kW Cjdpfx Aox Sw Iisfnjpu Operating voltage: 380 Volt/50 Hz Max. fuse rating: 100 A

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Cpsdpfjydlx Sex Afneu Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Cpedsydlvkspfx Afnju Clamping table changed! Not an original table!

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Cpjdeydlutepfx Afneu Post-travel: max. 10 mm Motor power: 3 kW

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Cjdpfx Aevvkmbefnspu Storage location: Nattheim

Condition: new, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, MAC Bending PB-H12540 Press Brake The MAC Bending PB-H12540 is a compact yet powerful CNC press brake, engineered for precise and efficient bending operations in both small and medium-sized workshops. With a bending length of 1250 mm and a press force of 40 tons, this machine delivers outstanding performance for a wide range of sheet thicknesses and materials. The robust construction ensures stability and durability, while the user-friendly controls guarantee high repeatability and flexibility. Ideal for metal fabricators seeking reliability, accuracy, and excellent value for money. Key features: - Bending length: 1250 mm Csdjyaq Tyopfx Afnopu - Press force: 40 tons - Compact design, suitable for smaller production areas - High accuracy and consistent bending quality - Suitable for various sheet thicknesses and materials - Easy operation and low maintenance requirements - Supplied with blades/tooling included - Optional WILA tooling available - Alternative tooling available upon request Price: On request.

Condition: used, Year of construction: 1967, total height: 2,850 mm, total width: 1,750 mm, total length: 2,000 mm, Empty weight: 6.000 kg Cedpfx Afex N Sxdsnepu - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Table width: 500mm - Throat depth: 350mm - Table length: 740mm - Ram width: 250mm - Ram length: 250mm - Model: Hydraulic - Max. stroke: 250mm - Power: 100.0ton - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg Cpedpsfnk I Eefx Afnou

Condition: good (used), Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm Codpfob I Dqasx Afnjpu -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Condition: good (used), Hydraulic press, single column press, C-column press, oil hydraulic press, hydraulic single column press, press machine, hydraulic punch for Schüco tools hydraulic press, multifunctional punch, punch, universal punch, punching machine -Hydraulic press: Hydraulic single-column press with stops on both sides -Pressing force: 15 tons -Hydraulic unit: 220 bar Cpsdpfxeu Scp Rs Afneu stroke: 25 mm -Hole: Ø 28 mm -Projection: 100 mm -Operation: foot pedal -Installation dimensions: 2575/800/H1350 mm -Transport dimensions: 1260/800/H1350 mm -Weight: 223 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers Csdpfx Aovu Sqxsfnjpu -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons Cedpfxeupbdge Afnopu -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Codpovzxq Ssfx Afnepu Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW Cedpfx Afsvuuflsnepu weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm Csdswvva Sepfx Afnjpu table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s Codpsvut N Nefx Afnjpu feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: good (used), Year of construction: 1983, machine/vehicle number: 809.14, Offer 25461 Technical data: - Max. pressing force: 30 t - Press pressure regulation - Stroke infinitely adjustable up to 200 mm - Stroke speed adjustable - Max. installation height: 450 mm - Machine table with T-slots: W 800 x D 500 mm - Clearance between columns: 600 mm - Usable table area: W 800 x D 500 mm - Drive: 400 V / 11 kW - Required space approx.: W 1000 x H 2300 x D 1600 mm Cedpfoyff H Ssx Afnopu - Weight approx.: 2500 kg

Condition: good (used), Year of construction: 1988, 1 x hydraulic bench press A.Lindenberg TP 6 Year of manufacture: 1988 Mounted on a stable, mobile table. (Can also be purchased without table) Nice machine from a small toolmaking workshop. Csdpfx Afsygdf Nsnjpu Technical data: Pressing force: 0.3 - 6 t Stroke: 205 mm Table: 250 x 250 mm Weight: 200 kg The machine can be inspected under power.

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm Csdpjx Uru Nofx Afnjpu table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Csdpfx Afoyg Hacjnjpu Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Cpjdsyg E T Iepfx Afneu Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1988, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Table size: 900 x 630 mm Floor clearance: 800 mm Downward speed: 200 mm/sec Cedpfxoyg E Tbe Afnspu Upward speed: 125 mm/sec Total power requirement: 17 kW Machine weight approx.: 7 t

Condition: good (used), Year of construction: 2011, Pressure 160 t Total power requirement 18.5 kW Cpedpfx Afjyg E Sqonju Machine weight approx. 13.5 t

Condition: ready for operation (used), Camu decoiler 3 ton Dimeco straightener - 800 x 1,1 mm - 11 x 60 mm straightening rolls - 4 x 60 mm feeding rolls - weight: 850 kg CNC mircrofeeding unit Pressix excentric press - 100 ton - 65 strokes/min - adjustable stroke: 10 130 mm - table: 950 x 660 mm - max opening: 370 mm Cpedpfex Imlpsx Afnsu