Used Hydraulic Shear for sale (16,507)

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm NC control: OPERATOR Redpfx Aceyxvgqj Tjcf Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch Rsdpfx Aevuz Tpjc Tocf - Operating instructions

Condition: used, Year of construction: 1983, Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized rear stop with fine adjustment via handwheel up to 1000 mm Rcodpfx Aer D Tnwoc Tof cutting length limitation knife sharpened Weight: 6,800 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, ELGO Positioning System Electric blade gap adjustment. Rear thin sheet metal support/carriage, pneumatic and monobloc, length 700 mm. Square stop 1500 mm + 2 supports of 1000 mm Specifications Rjdpeymyc Rjfx Ac Tecf Cutting length: 3100 mm Max. steel thickness: 10 mm Max. stainless steel thickness: 6 mm Number of sheet clamps: 15 Motorized back gauge stroke: 1000 mm Main motor power: 14.9 kW Weight: 10,500 kg Machine dimensions (L x W x H): 3900 x 2450 x 2200 mm

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles Rsdpfx Aoxabvqec Tscf - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, Hydraulic plate shear Fintek Type/Model: TS 2080 x 6.5 Condition: New Exclusive: Trade fair machine EURO-Blech Hannover 2026 Compact hydraulic plate shear, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the positioning and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving the hands free to align the workpiece. Technical data Cutting length: 2080 mm Sheet thickness: 6.5 mm Strokes/min: 24 - 36 Number of clamps: 12 Clamp pressure: 5.6 t Front support arms: 1000 mm Rear stop: 600 mm Cutting angle: 1/2 - 2° Motor power: 11 kW - High-quality, high-alloy shear blades with a high chromium content, suitable for stainless steel - Upper blade 2-edged, lower blade 4-edged - Hydraulic cutting angle adjustment ensures a clean, low-distortion and precise cut at any sheet thickness - Manual cutting gap adjustment (models from 4.5 mm and larger) - Excellent visibility of cutting lines via LED with shadow projection - High number of strokes per minute ensures fast operation - Generous support arms with adjustable stop - Side stop with double scale (metric/imperial) - Feed work table with ball rollers for effortless movement of the sheet - Continuous front guard - Hydraulic, independent clamps ensure perfect clamping of the sheet at all times, regardless of the degree of wear of the clamps, by applying the same pressure (no slippage or dragging of the sheet during cutting) - Manual rear stop 600 mm - Overload-protected hydraulic system - Mobile control panel with safety foot switch and emergency stop button Rcodpfx Acozh Uuio Tof - High performance and reliability - Various options available, e.g. small parts diverter, NC-controlled rear stop with intuitive control via touch screen, angle stop, sheet lifting device, etc. - Current CE conformity Options: - Pneumatic sheet lifting device with: - Selector switch for sheet return on the operator side or the rear of the machine - Integrated rollers for even and smooth removal of the cut material - Increased motor power for more strokes/min - Rear stop with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC rear stop 800 mm controlled via ball screw using M15S or FATEK control Inquiry item! Shipping costs in individual offer.

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 Redpfxjxab Tvj Ac Tscf column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Hydraulic plate shear STEINER, Type HTS 30/20 R Machine No. 315 Year of manufacture 1982 Cutting length 3050 mm Cutting thickness 20 mm Back gauge 800 mm, controlled Motor power approx. 30 kW Power connection 400 volts, 50 Hz - Back gauge with positioning control ELGO - Back gauge adjustment via ball screws - Safety light curtain SICK at the front as a guard - 3 units of material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine with a very stable design Space requirement of the base machine L x W x H 4650 x 2610 x 3200 mm Weight of the base machine 27000 kg Space requirement for transport (base machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Total weight 27000 kg Rjdpod Hxx Asfx Ac Tjcf Good condition Machine can be inspected in warehouse 37235 Hessisch Lichtenau, test cuts possible. The lower clamps are currently being re-sealed, and the corresponding price adjustment will be made in the next few days.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 10 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 10,000 kg, total length: 4,050 mm, total width: 2,050 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HYDRAULIC GUILLOTINE SHEAR 10 × 3200 ESTUN E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 10 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. Redpfxsyt Itqo Ac Tjcf The machine combines a robust hydraulic system with a motorized back gauge and ESTUN E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table simplify the positioning of large and heavy sheets while helping protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and improve accuracy during repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be configured for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 10 mm - Maximum cutting length: 3200 mm - Blade rake angle: 1°30′ - Cutting frequency: 10 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 3450 mm - Blade length: 3300 mm - Table height: 800 mm - Motor power: 15 kW - Weight: 10,000 kg - Dimensions (L × W × H): 4050 × 2050 × 1950 mm - Controller: ESTUN E21S - Cutting-line indicator: Illuminated STANDARD EQUIPMENT - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Front and rear safety guards - Foot-control pedal - ESTUN E21S controller - Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English This guillotine shear combines high cutting capacity, straightforward control, accurate sheet positioning and practical safety equipment. It is suitable for general fabrication work and repeat industrial production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Rsdehtq N Njpfx Ac Tjcf Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2008, sheet width 4100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm no. of strokes 12 - 24 Hub/min cutting angle 1 ° 30 work height max. 865 mm back stop - adjustable 1.0 - 1000 mm down holder 20 Stück Control ENC 100 M column arm 50.0 mm oil volume 200 ltr total power requirement 15.0 kW range L-W-H 5230 x 2250 x 2150 mm weight 11460 kg New price ~ 50,000 euros (!!) Special price on request ----- NC electro-hydraulic swing cut shears * with DURMA "ENC 100 M" control * manual cutting gap adjustment (eccentric) * including pneumatic sheet holding device for thin sheet metal cuts ----- Equipment: - robust electro-hydraulic swing cut shears - including DURMA "ENC 100M" NC control unit * Back stop pre-selection - X axis * Quantity * Cutting length limitation * Pivoting operation, left front - Monoblock welded steel construction made of high-quality steel - CNC electro-motorized back stop * with ball screw and linear guides * Automatic retraction of the back stop during the cutting process - Light barrier protection for access to the rear of the machine - manual cutting gap adjustment via eccentric - high-performance hydraulic cylinder made of SAM 1040 material - high-quality chrome-plated and finely ground hydraulic piston - split, fold-up finger guard 1,000 mm - easy handling of the sheets via ball rollers in the table - 1x long side stop including mm scale and tilting cam - 3x front support arms - 1x freely movable foot switch Rsdpfew U U T Tjx Ac Tecf - operating instructions Special accessories included: - pneumatic sheet holding device for cutting thin sheet metal - up to max. material thickness - ST .. 3.0 mm

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0.05 - 2.0 ° throat 350 mm table height 900 mm total power requirement 22.0 kW weight of the machine ca. 13400 kg range L-W-H 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=K4ymYMIJ7_Y ----- Robust electro-hydraulic CNC sheet metal shear with slide guides * Includes CYBELEC "DNC 60 CUT" control system Rsdpjxaadasfx Ac Tocf * Includes CNC electro-hydraulic cutting gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with slide guides - Includes CYBELEC CNC controller, model "DNC 60" - CNC electro-motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically folds up at maximum travel, for longer cuts * Includes selectable retraction function ("swing-away function") * Positioning accuracy 0.1 mm * Approx. travel speed 80.0 mm/sec. - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - 1x side stop with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Rear sheet chute (sheet inserts) - 1x freely movable foot switch - CE mark - Operating instructions

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 14 1/min, stroke rate (max.): 14 1/min, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,380 kg, total length: 3,840 mm, total width: 1,675 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 6 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 6 mm Maximum cutting length: 3200 mm Blade rake angle: fixed −2° Number of strokes per minute: 14 Back gauge travel: 20–600 mm (standard) Distance between side frames: 3450 mm Table height: 800 mm Motor power: 7.5 kW Weight: 7380 kg Machine dimensions (L × W × H): 3840 × 1675 × 1620 mm Equipment: Controller E21 Motorized back gauge Back gauge with ball screws Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Digital readout of the back gauge position Blade gap adjustment Set of blades Ball transfer units on the table 3 front support arms Front gauge with measuring scale Rear safety guard Front safety guard Illuminated cutting line Foot pedal CE declaration of conformity Manual in Polish Delivery conditions: The machine is brand new 12-month warranty Rcedpfx Asyt E Eksc Tsf Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 12 1/min, stroke rate (max.): 12 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,300 kg, total length: 3,850 mm, total width: 2,345 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 8 × 3200 E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 8 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table make large sheets easier to position and help protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and simplify repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be set for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 8 mm - Maximum cutting length: 3200 mm - Blade rake angle: 1°30′ Redpfx Acsyt E U Ee Tscf - Cutting frequency: 12 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 3450 mm - Blade length: 3300 mm - Table height: 800 mm - Motor power: 11 kW - Weight: 7300 kg - Dimensions (L × W × H): 3850 × 2345 × 1620 mm - Controller: E21S - Cutting-line indicator: Illuminated STANDARD EQUIPMENT - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Rear safety guard - Front safety guard - Foot-control pedal - E21S controller - Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English The machine offers a strong combination of cutting capacity, accurate sheet positioning, straightforward operation and comprehensive safety equipment. It is suitable for general fabrication work and repeat production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Condition: new, functionality: fully functional, Year of construction: 2024, control type: CNC control, controller manufacturer: Durma, controller model: DT-5, stroke rate (min.): 14 1/min, sheet thickness (max.): 6 mm, back gauge: 1,020 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, ES3006 in stock - Cutting length: 3100 mm - Capacity: 6 mm steel - Control: DT-5 Rcedpfx Acjwtl Aws Tjf - CNC back gauge: 1000 mm - Cutting length limitation - Easy operation - Retraction - Pneumatic sheet holder

Condition: excellent (used), Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, table height: 800 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, We hereby offer you a hydraulic swing beam shear of the brand "ERMAKSON", used, in very good condition. Rjdpsxvinmjfx Ac Tjcf Please feel free to contact us for a quote.

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA Rodjxaa I Sopfx Ac Tecf plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 4-meter guillotine shears from Safan Model: VS 430 6 Capacity: 4300 x 6 mm Year of manufacture: 1987 Rjdpfx Ajxtpwvoc Tecf Electric backgauge with NC readout Adjustable cutting angle

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm engine output 7,5 kW Control eView weight of the machine ca. 7,2 t CNC swing cut panel shears Rcjdpfx Aceqva Rzs Tsf electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available

Condition: new, functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 8, working width: 3,120 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 11 kW (14.96 HP), control voltage: 480 V, total length: 3,840 mm, total width: 2,050 mm, total height: 1,700 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Comparable to Durma, Baykal, Ermaksan Swing beam guillotine shear with fixed cutting angle Max. cutting length: 3120 mm Max. sheet thickness (at 450 N/mm2): 6 mm Cutting angle: 1.39 degrees Number of hold-downs: 15 units Motor power: 11 kW Cutting speed: 18 strokes/min Oil tank capacity: approx. 200 l Machine length: 3840 mm Machine width: 2050 mm Overall width: 2745 mm Machine height: 1700 mm Machine weight: 8800 kg Throat depth: 150 mm Standard equipment: CE safety equipment / conformity Maper control unit with memory function Manual central blade gap adjustment via handwheel Cutting length adjustment via control panel Ball transfer tables Motorized, programmable backgauge 1000 mm with ball screw drive Folding finger guard up to 1000 mm 1 piece 1000 mm stop arm with scale, T-slot, flip stop, ball bearings 2 pieces 1000 mm support arms with integrated ball bearings Cutting line illumination via shadow outline, LED lighting High-quality upper blades with 2 cutting edges High-quality lower blades with 4 cutting edges Option: CNC control Cybelec CybTouch 8 G The powerful addition to all types of high-quality guillotine shears. High-contrast touchscreen with vivid colors. Clear display with all information needed by the operator. Rjdpsxyxuqsfx Ac Tocf Intuitive and user-friendly. Complete part programming in seconds. CNC blade gap adjustment Automatic blade gap adjustment after material data input via control panel

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm Redpfx Acovc Amto Tecf down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Rodpfxozd H U Hs Ac Tecf Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: -

Condition: used, functionality: fully functional, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, HACO 3000x6mm hydraulic guillotine shear TS-3006 Brand: HACO Rodswx Ix Sepfx Ac Tecf Model: TS-3006 Power: Three-phase 380V Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Motor: 7.5 kW

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Redpfozwclusx Ac Tocf Blades with 4 cutting edges Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: 11.2760, working width: 3,100 mm, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Control: CNC Max. working width: 3,100 mm Throat depth: 40 mm Max. sheet thickness: 8 mm Back gauge: 1,000 mm Motor power: 16.5 kW MACHINE DETAILS Transport dimensions: 3,400 mm x 2,300 mm x 2,100 mm (L x W x H) Transport weight: 8,000 kg Transport packages: 2 Rsdpfx Aow Tzkvec Tecf Documentation available: Yes CE marking present: Yes