Used Hydraulic Press Walterreis for sale (24,157)

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Kdjdpfev Srfwsx Aalei Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Kedpfx Aaoyq R D Hjljdi

Year of construction: 2021, condition: like new (used), Type: PX 30530 Serial number: 12932 Year of manufacture: 2021 Kdsdsyhdrrepfx Aalji Bending length: 3050 mm Pressing force: 320 t Maximum pressure: 280 bar Motor power: 18.5 kW Oil tank capacity: 400 l Weight: 14,700 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2732, total height: 2,045 mm, table height: 850 mm, installation height: 400 mm, total width: 780 mm, total length: 1,100 mm, throat depth: 265 mm, pressing force: 50 t, table width: 450 mm, table length: 700 mm, operating speed: 6 mm/s, overall weight: 1,720 kg, reverse speed: 42 mm/s, pressure: 320 bar, Used hydraulic single-column press for sale due to business closure. Sold without tools. Kdedpfeyrp E Ssx Aalji

Condition: used, functionality: fully functional, For gluing stair treads - Hydraulic adjustment of the inclined beam - Hydraulic cylinder, laterally mounted on ball bearings, adjustable, 120 mm stroke - Combined and individual cylinder control Scope of delivery: Press complete with all accessories: 4 hydraulic cylinders with 120 mm stroke, 1.8 t per cylinder, 3 cylinders individually lockable, 1 cylinder for pressure beam adjustment, control panel for two operations, pressure gauge and regulator, hydraulic unit, oil tank, and hoses, Kjdpfx Aeygwp Ujalsdi - 220/380 Volt, - Press width 1800 mm - Press height 750 mm - Pressure beam support 80 mm - Weight approx. 500 kg

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Kdedpem Nntyofx Aalji Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases Kdodpfx Aor Etulsalsi - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  Kjdpfx Aaor D U I Dslsdi - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included

Condition: used, Year of construction: 1982, Technical details: pressure: 2,5 t Kodpfxordlgio Aaljdi

Condition: new, Year of construction: 2026, neu 2026 070168 prompt, Zwischenverkauf v Türkei 10900 € 209.28 € 1 150 to horizontal verschiebbar 300 mm 1070 mm 280x200 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2480 mm Kodpfx Aaswirt Islodi 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Year of construction: 1991, condition: ready for operation (used), Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible. Kdjdpfx Aasynlubslji

Condition: new, Hydraulic cylinder exchange cylinder Kdodpfx Aod Hf Uwsaloi Chamber filter press As a spare part for your chamber filter press, we supply hydraulic cylinders for all manufacturers and formats.

Condition: used, Hydraulic Double-Column Press Double-Column Hydraulic Press SCHÖN Type TES 25 Machine No. 1847 Year of manufacture: 1977 – Retrofit in 2019 Fully overhauled by Schön in Hattingen in 2019 – Excellent condition Press force: 25 tons Kdedpfx Ajyg Rfpealoi Column gap: 500 mm Side clearance between columns: 120 mm Table size: 440 x 320 mm Table opening: Ø 50 mm Ram surface: Ø 140 mm Clamping pin: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 330 mm Table height above floor: 910 mm Motor output: 4 kW Electrical connection: 400 V, 50 Hz - Complete hydraulic system replaced during 2019 overhaul - Entire electrical control system (contactor-based) renewed in 2019 to new machine standard - Stroke release via two-hand control, electric foot switch, or light curtain - Operating modes: setup, single stroke two-hand, single stroke via foot switch, control via light curtain - SICK light curtain, Type C 4000 with single- and dual-cycle, and safety function - Rapid approach and working stroke - Pressure- or stroke-dependent stroke limitation - Mechanically adjustable fixed stop - Manual press force regulation via knurled knob - Press dwell time extension: 0.5–3 sec. (pressure holding time) - Stroke counter - UVV safety inspection in accordance with BGR 500 (for manual loading) performed in 08/2019 - Full documentation available (user manual, hydraulic diagram, circuit diagram) Required floor space (L x W x H): 1100 mm x 1050 mm x 2100 mm Weight: 900 kg Very good condition

Year of construction: 2007, condition: ready for operation (used), overall weight: 11,000 kg, total height: 2,850 mm, product length (max.): 4,550 mm, number of axes: 4, General Data Machine weight 11000 kg Measurements height 2850 mm Dimensions Machine Length 4550 mm Main Drive Number of axis 4 Bending length 3100 mm This 4-axis ERMAK CNC HAP 3100x200 was manufactured in 2007. A robust hydraulic press with a press capacity of 200 tons and a bending length of 3100 mm. It operates with an Ermak ER70 CNC control system and has a motor power of 15 kW. Ideal for heavy-duty bending tasks. Machine dimensions are 4550 × 2250 × 2850 mm, weighing 11,000 kg. Contact us for more information about this machine. Kdedpox D Diusfx Aalsi Application Types Bending

Year of construction: 2013, operating hours: 14,572 h, condition: ready for operation (used), General Data Machine weight 13200 kg Measurements height 2330 mm Control Unit Brand DELEM Kdodex D E N Aopfx Aalsi Model T3000 Main Drive Number of axis 6 Bending length 4140 mm Pressing force 1800 Kn Dimensions Machine Length 4610 mm Movement X-Axis Movement 600 mm Y-Axis Movement 20 mm This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: new, pressing force: 20 t, machine/vehicle number: DF0233, pressure:20 t stroke:600 mm table surface area:2000 x 600 mm dimensions:ca. 3500 x 1200 x 2800 mm total power requirement:3 kW pre-running speed:9,9 mm/sec return speed:25 mm/sec Pressure power:180 bar :100 l weight of the machine ca.:3 t Kodpfxofxyi Ss Aaledi :5 Zoll

Condition: used, Year of construction: 2019, pressing force: 100 t, pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm Kjdpfeffamxex Aalodi table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm diameter of piston:76 mm ram diameter:110 mm ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm hollow:400 mm :1000 kg :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec :33 mm/sec

Condition: good (used), Press force: approx. 6 tons Table size: 400 x 300 mm (W x D) Table opening: Ø 133 mm Ram size: Ø 70 mm Thrust: 178 mm Installation height: 240 mm (top stroke) Stroke: 1-100 mm Weight: approx. 480 kg Drive power: 2.2 kW Other features • Hydraulically driven • Continuously adjustable stroke rate Ksdpfxjvxvtxj Aaledi • With protective screen for inserting work with secure tools • With height-adjustable mounting bracket (feed optional)

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm Kdodpfxsd E U Nns Aalei • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 11000 € 211.2 € 50 to fix 350 mm 900 mm 900 mm max. 9 mm/s 0,75 kW 1700 mm 700 mm Ksdpfxowiq Ahe Aalodi 2100 mm 650 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 5500 € 106.15 € 30 to fix 775 mm 5 mm/s 10 mm/s 1500 mm 700 mm 2015 mm Kdedpfoypbxfjx Aalsi 400 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8900 € 171.77 € 100 to fix 300 mm 1570 mm 220x160 mm 5 mm/s 10 mm/s Kdsdpoypbw Ujfx Aalji 2500 mm 1000 mm 2200 mm 1600 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 6500 € 125.45 € 70 to fix 900 mm 900 mm 1700 mm 700 mm 2100 (PSS: 2300) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: Kdsdjypbwzopfx Aalsi same as PSS 70 NC but with stroke 500 mm € 8.700,00

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 8600 € 165.98 € 100 to horizontal verschiebbar 900 mm 1050 mm 1900 mm 1000 mm 2250 (PSS: 2400) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 100 M TL: 1 speed 4 mm/s, single-hand control with lever € 8.600,00 PSS 100 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 9.300,00 PSS 100 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € Kedpsypbwuefx Aalsdi 9.900,00 PSS 100 M: same as PSS 70 M NC but with stroke 500 mm € 11.400,00

Condition: new, Year of construction: 2023, neu 2023 7295 ca. 12 Wochen ab Auftrags Türkei 22750 € 436.8 € 150 to fix 1520 mm 300 mm 1520 mm 610 mm 9 mm/s 5 mm/s 10 mm/s 10 mm 600x1520 mm Ksdsypbwnspfx Aalodi 100 mm 190 mm 2630 mm 1000 mm 2450 mm 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH