Used Hydraulic Frame Press for sale (41,475)

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. Bodpeig Hzkefx Adxslp The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total height: 2,300 mm, installation height: 400 mm, total width: 1,620 mm, total length: 2,240 mm, pressing force: 61 t, table width: 450 mm, table length: 450 mm, overall weight: 3,800 kg, ram plate width: 160 mm, ram plate length: 160 mm, type of input current: three-phase, stroke length: 150 mm, input voltage: 400 V, Equipment: documentation/manual, DR. Fritsch DSP 515 Pressure Sintering Press Machine Type: Pressure Sintering Press Year: 2008 Condition: Very Good. Decommissioned Includes Manual Technical Specification Main Cylinders: 1 Cylinder Diameter: 160mm Cylinder Stroke: 150mm Piston Rod Diameter: 140mm Effective Pressing Surface: 201.1cm2 Auto Pressure Control: 60-603kN Internal Dimensions: 450 x 450 x 400mm Self Baking Electrodes Dimensions: 180 x 180 x 60mm Inner Width of Electrodes: 145mm Temperature Range: 0-1,100 Deg C Sintering Mould Height: 60-120mm Sintering Surface: 150cm2 Total Connected Load: 155kVA Total Supply Voltage: 3 x 400V 50/60cps Bodpfxov Rz Ifs Adxolp Total Nominal Current: 3 x 224A Operating Voltage: 3 x 400V 50/60cps/ 1 x 230V 50/60cps Control Voltage: 24V DC Cooling Water Consumption: 120-150L/min Water Quality: Drinking Water Recommended Water Supply Temp: 15 - 25 Deg C Water Pressure: 2-4 Bar Differential Pressure: 1-2 Bar Compressed Air Consumption: Approx. 20L/min Air Pressure: 4-6 Bar Protective Gas Consumption: Approx. 300-1000L/h Gas Pressure: 1-5 Bar Dimensions: 2240x1620x2300mm Weight: 3800kg

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm Bsdpfjxukpcsx Adxolp stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm hole in the table 130 mm

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm Bjdsupbdgjpfx Adxelp -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: used, Year of construction: 1980, . 52965 pressure 10 t oil contents 110 Liter +++++ Bjdsvxlr Depfx Adxelp Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50 /92-NG 600/15 kW/32Liter, pressing force: 130 t, operating speed: 80 mm/s, overall weight: 3,500 kg, Hydraulic straightening press Manufacturer: G +K Year of manufacture: 1992 Max. pressing force: 130 t Lower table size: 800 x 500 mm with T-slots Bsdpfsxr Rnaox Adxolp Upper table size: 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 V AC, 24 V DC

Year of construction: 1985, condition: good (used), Met International Used Hydraulic press Forming press 40ton Bodpfx Asn Awfyedxelp Bed size 600mm X 600mm Four poster hydraulic press. H frame / C frame also available. Many other used presses for sale with cushion, different daylight and stroke. New hydraulic power presses available built to your specification. Cheap hydraulic presses. Large and small bed sizes available. Delivery and installation can be arranged.

Year of construction: 2012, condition: ready for operation (used), This MILLUTENSIL Mil 303 hydraulic press was manufactured in 2012. It features a usable table of 3000 mm by 2000 mm, with a maximum load capacity of 30,000 kg on the upper table and 70,000 kg on the lower table. The press operates with a total power of 31.1 kW and offers adjustable hydraulic pressure up to 240 bar. Consider the opportunity to buy this MILLUTENSIL Mil 303 hydraulic press. Contact us for more information. Bjdpfsxuav Eox Adxslp Application Types Bending

Condition: used, Hydraulic Spotting Press MILLUTENSIL Type BV 25 PM Machine No. 632 / 25111 Year of manufacture: 1991 Clamping force: 18 tons Opening force: 15 tons Table area: 775 x 760 mm Blodpetx E Rdjfx Adxsp Clamping area of upper table: 900 x 550 mm Column width: 900 mm Installation height max.: 750 mm Installation height min.: 230 mm Stroke of upper table: 520 mm Infinitely variable stroke speed: 0 - 1000 mm/min Adjustable hydraulic pressure: 10 - 200 bar Max. tool weight on table: 2500 kg Max. tool weight on upper table: 800 kg Table height above floor: 850 mm Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz - Upper table motor-driven, swivels 360° - Hydraulic ejector unit in the table with 120 mm stroke - M14 threaded holes in the table - Hydraulically extendable table - Depth adjustment bar for automatic downward stroke limitation Space requirements L x W x H: 1550 x 1500 x 2000 mm Weight: 1900 kg

Condition: new, Year of construction: 2025, pressure 400 bar pressure 100 t stroke 400 mm 900 mm 1500 1/min 12 l/m 31 l quantity of oil 40 l pre-running speed 8,2 mm/sec return speed 13 mm/sec weight of the machine ca. 1100 kg height 2450 mm 900 mm Bedpfxsxqrgns Adxjlp 1320 mm distance between columns 1010 mm distance between columns 300 mm Integrated pressure manometer In height adjustable working table

Condition: used, Year of construction: 1999, pressure 30 t plate thickness 800 mm keins Blodpfevanvzox Adxop weight of the machine ca. 1,3 t

Condition: excellent (used), Machine: Used Lindemann Sobod 8 Metal Baler Bale size: 400mm x 400mm Blsdpfx Adexrz S Aexop Specifications: see table Status: ready to use Condition: in very good maintenance condition Year of manufacture: unknown Power: electric Availability: March/April 2025

Year of construction: 2002, condition: good (used), Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Bloden Tnv Espfx Adxjp Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Condition: not inspected (used), Press for bending and straightening trusses. Machine has not yet been tested Blsdexq S Ufjpfx Adxep

Condition: good (used), Year of construction: 1972, functionality: fully functional, 1.0 pc Vertical press for application: SMC (Sheet Molding Compound) Manufacturer: LAUFFER Model: PRKP120 Year of manufacture: 1972 Pressing force: 120 tons Table: 1,200 x 1,000 mm Additionally heated table area: 800 x 800 mm Installation height: 810 mm Stroke: 790 mm Opening: 1,600 mm Bedpfxswzaxps Adxolp

Condition: new, pressure 200 t stroke 300 mm table surface area 1900 x 440 mm column travel between the guideways 1900 mm working feed 5,0 mm/sec engine output 15,0 kW weight of the machine ca. 4.800 kg. range L-W-H 2.570 x 1.665 x 2.860 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports Bljdpoxabw Iofx Adxsp - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, Year of construction: 2003, pressure . t throat . mm stroke . mm Bjdpew Syfcjfx Adxslp total power requirement . kW weight of the machine ca. 4 t

Year of construction: 1986, condition: like new (used), Used PJ Hare ltd C frame hydraulic press for sale: Pj Hare Limited hydraulic press for sale PRESS MODEL: 25HP Overall Height MM: 2425 Overall Width MM: 1120 Overall Depth MM: 1470 Weight KG: 2000 Fixing Hole dio. MM: 18 Fixing Hole Centres MM x MM: 610 x 1108 Fixing Pad Size: MM x MM: 120 x 250 Oil Capacity L: 50 Air Supply Pressure Max bar: 6 Air Supply Pressure Min bar: 4 Bedpfohcfyusx Adxelp Main Motor Power kw: 7.5 Motor Fuse Rating A: 20 Complete with cushion Electrical Supply Details: Minimum Fuse Rating A: 35 Minimum Conductor Size mm: 2.5 PAGE 2: Model 25HP: Capacity Tons: 25 Capacity KN: 250 Ram Force Tons: 3.1 Ram Advance Speed: 425 Ram Pressing Speed: 35.1 Ram return Speed;289 Motor Racing KW:7.5 Weight KG Approx: 2000 Max Stroke: 150 Guard Aperture Width: 680 Guard Aperture Height: 300 Min. Shut Height: 200 Max. Daylight: 450 Shut Height Adjustment: 100 Throat Depth: 250 Bed Height: 900 Bed Width: 650 Bed Depth: 480 Front to Centre Line: 250 Clearance hole dia: 150 Clearance under bed: 350/ 250 Tee Slot Details: 18,15,34,33 Bed Thickness: 95 Side Chute Width: – Vert Chute Width: 255 Hole in Throat Width: 250 Hole in Throat Height: 250 Top Platen Width: 420 Top Platen Depth: 220 Top Platen Fixing Hole Details: 370, 170, 13 Tool Holder dia: 40 Tool Holder Length: 65 Fixing Hole dia: 18 Overall Depth: 1400 Overall Width: 900 Overall Height: 2450 Fixing Hole Centres: 1110 Hare presses for sale New c and h frame hydraulic presses for sale

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm Bodpfx Adoxabnaoxjlp column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, Year of construction: 1999, stroke 650 mm 1417 cylinder durchmesser 250mm Bodpowzyudsfx Adxolp weight of the machine ca. 3,4 t t

Condition: excellent (used), Year of construction: 1999, pressing force: 6 t, Used 6Ton Hare C Frame Press For Sale 2 available yet the listing is for 1, if you are interested in 2 feel free to enquire CAPACITY 63 kN MODEL TYPE AL630 SERIAL NUMBER YEAR OF MANUFACTURE 1999 99ALOB0020 TOTAL STROKE 100mm POWER STROKE 25mm TYPE OF GUARD FITTED CONTROL OIL TYPE OIL CAPACITY SHELL TELLUS T15 1.8 LITRES AIR LINE PRESSURE MACHINE WEIGHT MAXIMUM TOP TOOL WEIGHT Bsdpfx Adjv Ed Udsxelp 6 - 10 Bar 550 kg 50 kg

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Blsdpfx Adjxabcwoxop Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, Year of construction: 1960, pressure 1000 t Bsdjw Syd Ejpfx Adxjlp stroke 600 mm weight of the machine ca. 4 t

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Bljdpfx Adsn Awd Rjxsp Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: Bjdpfxjxaayhs Adxjlp * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions