Used Hydraulic Drawing Press for sale (25,754)

Condition: excellent (used), Year of construction: 1999, pressing force: 6 t, Used 6Ton Hare C Frame Press For Sale 2 available yet the listing is for 1, if you are interested in 2 feel free to enquire CAPACITY 63 kN MODEL TYPE AL630 SERIAL NUMBER YEAR OF MANUFACTURE 1999 99ALOB0020 TOTAL STROKE 100mm POWER STROKE 25mm Kjdpfx Aev Ed Udsaljww TYPE OF GUARD FITTED CONTROL OIL TYPE OIL CAPACITY SHELL TELLUS T15 1.8 LITRES AIR LINE PRESSURE MACHINE WEIGHT MAXIMUM TOP TOOL WEIGHT 6 - 10 Bar 550 kg 50 kg

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design Kedjifkldopfx Aalsww frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: used, Year of construction: 2026, Empty weight: 1.500 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 0 - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kjdoyvyxxopfx Aalsww Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 Kjdpfx Aajxywkqsljww - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 160 - Table length [mm]: 630 - Table width [mm]: 550 - Ram length [mm]: 1100 - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total height: 2,700 mm, total width: 2,550 mm, total length: 1,350 mm, Empty weight: 7.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 5499 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 63 - Max. stroke [mm]: 200 - Table length [mm]: 630 - Table width [mm]: 525 - Ram length [mm]: 1100 - Motor power: 20.0kW - Transport dimensions: 1350mm x 2550mm x 2700mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ksdsx Ad Hkepfx Aalsww Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,450 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg Kwedpfxsw N Su Ds Aaljw - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1967, total height: 2,850 mm, total width: 1,750 mm, total length: 2,000 mm, Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 Kodpfex N Sxdex Aalsww - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,100 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 260 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 Kwodpfx Aaow N St Hjlew - Motor power: 2.2kW - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 1,255 mm, installation height: 1,600 mm, operating speed: 9 mm/s, reverse speed: 85 mm/s, total length: 16,835 mm, total width: 5,695 mm, travel distance Z-axis: 900 mm, empty load weight: 370,000 kg, load capacity: 2,000,000 kg, passage width: 12,470 mm, table width: 800 mm, 9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Locking speed: 77 mm/sec Electric motor (power): 2x 90 kW Height: 6750 mm (above floorlevel) Kwedpfx Aasytyp Rslew Bending length: 14 000 mm

Condition: ready for operation (used), controller manufacturer: AMNC-PC Touch, throat depth: 420 mm, installation height: 470 mm, operating speed: 10 mm/s, total length: 5,840 mm, total width: 3,000 mm, total height: 2,900 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 200 mm, empty load weight: 11,300 kg, passage width: 3,760 mm, table width: 180 mm, 7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: Kwjdpfx Aeytyqbealsw • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835 Capacity: 130 ton x 4100 mm Backgauge: CNC Locking speed: 200 mm/sec

Condition: ready for operation (used), throat depth: 600 mm, installation height: 600 mm, operating speed: 7 mm/s, reverse speed: 46 mm/s, travel distance Z-axis: 300 mm, passage width: 5,050 mm, table width: 300 mm, Twee kantbanken van 6 meter kunnen samenwerken om materiaal van 12 meter te buigen. Kantbanken kunnen volledig worden gedemonteerd, zodat ze in containers kunnen worden vervoerd. Kwjdpfx Asytyqnjaljw Capacity: 1200 ton x 12 meter Backgauge: CNC Locking speed: 80 mm/sec Electric motor (power): 2x 44 kW Weight: 124 ton (2x 62 ton)

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: Ksdpfexabcwjx Aaljww - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Kwedjxaabfepfx Aaljw * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Kjdpod D Ryfofx Aaljww with various punching tools

Condition: used, Year of construction: 2004, total height: 2,620 mm, total width: 1,450 mm, total length: 2,650 mm, Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 180253 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 150 - Max. stroke [mm]: 340 - Table width [mm]: 1570 - Ram length [mm]: 280 - Ram width [mm]: 200 - Height adjustment [mm]: 800 - Pressing speed [mm/s]: 5 - Column spacing width [mm]: 1570 Ksdpjytghtofx Aaloww - Transport dimensions: 2650mm x 1450mm x 2625mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Heavy duty splicing press for producing long lengths of timber Kwedepahmhepfx Aalsw Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 1,250 mm, installation height: 1,650 mm, reverse speed: 75 mm/s, total length: 7,100 mm, total width: 5,000 mm, travel distance Z-axis: 1,000 mm, load capacity: 4,000,000 kg, table width: 650 mm, 12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Kwedpfxoyp Nydj Aalsw Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Passage between uprights: 4600 mm (2x) Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Bending length: 16200 mm

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 405 mm, installation height: 820 mm, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 7,360 mm, total width: 3,025 mm, power: 55 kW (74.78 HP), travel distance Z-axis: 420 mm, empty load weight: 60,000 kg, passage width: 3,760 mm, table width: 500 mm, 8 assen: Y1 / Y2 / X1 / X2 / R2 / R2 / Z1 / Z2 Kwedpov Rwm Refx Aalsw Bovenste hydraulische klemming Laserveilige beveiliging = u kunt snel tot 1 mm van uw werkstuk laten zakken en daarna overschakelen naar een lagere buigsnelheid Robuuste kantbank ram geschikt voor het verwerken van gereedschappen tot 300 ton per meter! Er is veel zwaar gereedschap beschikbaar Gereedschap is OPTIONEEL! Capacity: 640 ton x 4500 mm Backgauge: CNC Locking speed: 80 mm/sec Height: 5385 mm (4445 mm above floorlevel)

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 400 mm, installation height: 650 mm, operating speed: 7 mm/s, reverse speed: 55 mm/s, total length: 8,400 mm, total width: 3,100 mm, total height: 4,620 mm, power: 47 kW (63.90 HP), travel distance Z-axis: 300 mm, empty load weight: 90,000 kg, passage width: 7,210 mm, table width: 350 mm, - 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Locking speed: 70 mm/sec Power needed: 380V Kwodpfx Aaswu Inlolew

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 330 mm, installation height: 500 mm, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 6,500 mm, total width: 1,980 mm, total height: 3,700 mm, power: 22.5 kW (30.59 HP), travel distance Z-axis: 250 mm, empty load weight: 33,000 kg, passage width: 5,050 mm, 7 assen: Y1 / Y2 / X / Z1 - Z2 synchro / V / R bovenste hydraulische klemming CNC-kroon Ramcapaciteit: 220 ton per meter Kwedpjydf Hcefx Aalew laserkluisbeveiliging achteraf uitgerust met nieuwe 2D-besturing Capacity: 320 ton x 6100 mm Backgauge: CNC Locking speed: 80 mm/sec

Condition: ready for operation (used), controller manufacturer: TS Touch, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 2,900 mm, total width: 1,850 mm, total height: 2,260 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 275 mm, empty load weight: 5,100 kg, passage width: 2,050 mm, 4 assen: Y1 / Y2 Y3 / X touchscreenbediening Kjdpfx Aaoyf Ruhsljww Willa/Modufix bovengereedschap Y3 = onderste tafel, in hoogte verstelbaar De onderste tafel fungeert tevens als dichtdrukmatrijs (pneumatisch). Er is ook (elektrische) doorbuigingscompensatie in de onderste tabel. Capacity: 40 ton x 2050 mm Backgauge: CNC Max distance between table -- ram: 415 > 575 mm (variable) Locking speed: 90 mm/sec

Condition: ready for operation (used), controller manufacturer: 2D touch, throat depth: 200 mm, operating speed: 11 mm/s, reverse speed: 80 mm/s, total length: 4,100 mm, total width: 2,320 mm, total height: 2,800 mm, power: 11 kW (14.96 HP), empty load weight: 8,500 kg, passage width: 2,050 mm, table width: 180 mm, speciale verlenging van 1000 mm voor een totale buiglengte van 3500 mm Kwjdpfxsx Enfro Aalew 3 assen: Y1 / Y2 / X achteraanslag van 1000 mm !! lvd-gereedschap Capacity: 100 ton x 2500 mm + 1000 mm Backgauge: CNC Max stroke: 200 mm! Max distance between table -- ram: 430 mm! Locking speed: 100 mm/sec

Condition: ready for operation (used), controller manufacturer: Cadman-B Touch, throat depth: 405 mm, installation height: 500 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, total length: 7,081 mm, total width: 2,200 mm, total height: 3,640 mm, power: 37 kW (50.31 HP), travel distance Z-axis: 300 mm, empty load weight: 24,600 kg, passage width: 5,050 mm, table width: 120 mm, 9 assen: Y1 / Y2 / X1 / X2 / R1 / R2 / Z1 / Z2 / V 4 plaatsteunen aan de voorkant Kwodpfxsyhibxe Aalow laserkluisbeveiliging Willa-gereedschap Capacity: 220 ton x 6100 mm Backgauge: CNC Locking speed: 120 mm/sec

Condition: ready for operation (used), controller manufacturer: TS1 touchscreen, throat depth: 400 mm, installation height: 420 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, total length: 4,300 mm, total width: 1,800 mm, power: 5.5 kW (7.48 HP), travel distance Z-axis: 240 mm, empty load weight: 7,500 kg, passage width: 2,550 mm, table width: 90 mm, 7 axes: Y1 / Y2 / X / R / Z1 / Z2 / V wila / modufix / standard tooling sick laser security Ksdpfxex Immyo Aaljww enlarged stroke of 240 mm enlarged depth of throat of 400 mm Capacity: 80 ton x 3100 mm Backgauge: CNC Locking speed: 300 mm/sec Height: 3160 mm (with arm)

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 300 mm, operating speed: 10 mm/s, reverse speed: 79 mm/s, power: 20 kW (27.19 HP), travel distance Z-axis: 200 mm, empty load weight: 10,000 kg, passage width: 2,550 mm, 6 axes: Y1 / Y2 / X / R / Z1 / Z2 Kjdpfx Aasylqnuslsww upper and lower hydraulic clamping Willa/Modufix tooling 2D touchscreen control Capacity: 110 ton x 3100 mm Backgauge: CNC Locking speed: 100 mm/sec