Used Hydraulic Cylinder Double Acting for sale (32,665)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H Nsdjyzr Nmspfx Ac Aodb • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 120 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm -Hole: Ø 20 mm -Number: 2x cylinders available -Price: per piece Nodov Tkwuspfx Ac Asdb -Dimensions: Ø 60 x 300 mm -Weight: 4.0 kg/piece

Condition: like new (used), functionality: fully functional, type: HZOS 160/100/1200/D piston diameter: 160mm piston rod diameter: 100mm stroke: 1200mm Ndjdoyxqrbjpfx Ac Aob perm. Pressure: 250 bar

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm Ndsdez Atv Iepfx Ac Asb • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Year of construction: 1986, condition: good (used), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake Njdpsupbd Tofx Ac Aedb -Hydraulic cylinder: comes from a hydraulic press manufacturer MAE type HY-S63S pressing force 63 tons -Hydraulic cylinder: pressure piston stroke 690 mm -Piston rod: Ø 130 mm -Piston diameter: approx. 160 mm -Bolt circle: Ø 180 x 18 mm -Dimensions: Ø 270 x 1200 mm -Weight: 330 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, lifting cylinders Nodpfx Acspk Iqpo Ajdb -Hydraulic cylinder: single-acting stroke 240 mm -Piston rod: Ø 130 mm -Hole circle: Ø 205 x 14 mm -Dimensions: Ø 230 x 465 mm -Weight: 57 kg

Condition: used, hydraulic cylinder for ATLAS loading crane stroke 750 mm piston rod 125 mm outside diameter cylinder tube 235 mm piston diameter approx. 200 mm length retracted middle - middle of bolt 1,100 mm bolt diameter cylinder tube 80 mm width of holder 245 mm bolt diameter 100 mm both bolt holders with plain bearings original Atlas spare parts number 4189526 width of piston rod holder 130 mm weight approx.  330 kg / unit original price approx. ? 9,500.00 *- new - * Nsdpfoh N D U Dex Ac Aodb *- 2 units on stock - price per unit -*

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders -Manufacturer: GSL, hydraulic cylinder, tilt cylinder double acting with control valve, stroke 1590 mm -Type designation: D040025-Z2 T06 Ndodpjgwhvdsfx Ac Asb - Piston rod: Ø 25 mm / holder Ø 20 mm -Quantity: 3x cylinders available -Price per piece -Dimensions: 2045/120/90 mm -Weight: 22.5 kg / pc.

Condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 25 mm -Type: E0400180H20025 E0400180H2/0025 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 Nsdsfuw Irjpfx Ac Ajdb -Pipe: outside diameter 50 mm -Total length retracted: 240 mm -Hole: Hole Ø 20 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 240/50/H68 mm -Weight: 2.4 kg/piece

Condition: good (used), Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder Ndjdpfx Acei Exqij Aeb -Hydraulic pull cylinder: with integrated hand pump -Traction force: 50 t -Stroke: 155 mm -Piston rod: Ø 80 mm -Images: Inside approx. 145 x 50 mm, see photos -Quantity: 5 pieces available Price: per piece -Dimensions: 850/160/H420 mm / 810/155/H415 mm / 810/155/H420 mm / 815/150/H630 mm -Weight: 68kg / 66kg / 62kg / 65kg

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. Nedpfx Aoph Uk Nsc Asdb (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Single-acting: cylinder -Piston diameter: approx. 60 mm -Piston rod: Ø 45 mm -Stroke: 1530 mm -Cylinder comes from a Still forklift mast -universally applicable: -Number: 1x cylinder available Njdpfsdl U I Rex Ac Aodb -Price: per piece -Dimensions: 80/80/H1800 mm -Weight: 36 kg/piece

Condition: like new (used), functionality: fully functional, type: HZOS 100/60/1200/D/FU perm. pressure: 250 bar piston diameter: 100mm piston rod diameter: 60mm Nsdpoyxqmlefx Ac Aodb stroke: 1200mm

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Nedozqzcrjpfx Ac Aedb

Year of construction: 2006, condition: used, machine/vehicle number: 10510, Drive power: 138 kW, clamping force: 4,500 kN, machine weight: approx. 74,000 kg, max. tool weight: 7,500 kg, tool dimensions: approx. 2,150 x 1,300 mm, stroke: approx. 61 mm, SIEMENS SIMATIC C MULTI PANEL control, two-hand operation, upstream light curtain, separate RITTAL control panel system, cooling system, including accessories: 1 workbench, 1 sheet metal cabinet, contents: various hand tools. Nsdpfx Aozqzd Aoc Aodb

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: single-acting -Stroke: 295 mm -Piston rod: Ø 40 mm -Dimensions of mount/rollers: see photos -Total length when retracted: 530 mm -Dimensions: 530/235/H130 mm Nsdpfx Aef Ngb Hjc Aedb -Weight: 26 kg

Condition: good (used), Side shifter, side lift, forklift shield Nsdpsz A T Egofx Ac Ajdb -Sideshift: Hydraulic cylinder -Connections: hydraulic -Dimensions: 800/140/H75 mm -Weight 13.6 kg

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE Njdpfxjtyqizs Ac Ajdb

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Ndsdpeptf Ihsfx Ac Asb -Hydraulic cylinder: single-acting stroke 1700 mm -Piston rod: Ø 45 mm -Dimensions: Ø 75 x 2100 mm -Weight: 40 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Nsdpfxjgvwaaj Ac Asdb -Manufacturer: Pacoma, single-acting hydraulic cylinder, 133 mm stroke -Type designation: 3483441M91 43 L 01 -Cylinder: outer Ø 75 mm -Piston rod: Ø 60 mm -Dimensions: 325/75/H120 mm -Weight: 8.6 kg

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Nsdelc N R Djpfx Ac Aedb

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t Nsdpfxofxyirs Ac Ajdb dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Ndedpfx Acjdzp Tco Asb Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm Ndsdpfx Acog Avqco Asb -Weight: 1132 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min Ndodpfjycck Aex Ac Aob -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg