Hydraulic cylinder stroke 495 mm

Lingk & Sturzebecher LS-DZ-DD-220/125-496-250-1"-GAB/GAS

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / accumulator / filter ... -Type: 03 HDJ -Engine power: 22 kW/1460 rpm -Tank capacity: approx. 240 liters Godpfegz Irvox Amheiw -Pressure gauge: up to 250 bar -Individual components: pressure accumulator/hydraulic tank/filter/valves (see pictures) -Number: 2 units available Price: per piece -Dimensions: 1060/820/H1530 mm -Weight: 738 kg

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC Gijdexacdvspfx Amhsw - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, Year of construction: 2023, Welding turntable, container rotating device, 6000 kg load capacity Gedsk Adl Hopfx Amhjiw Digital display with foot-operated remote control Diameter from 180 mm to 3500 mm Drive roller diameter 300 mm Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable: 200 - 1800 mm/min.

Year of construction: 1984, condition: used, Large grinding wheel diameter: 40 mm Small grinding wheel diameter: 5 mm Weight: 0.9 t 2 grinding wheels with flange 8 collets 1 coolant tank Mechanical feed with fixed stop Gijdpfxecq Rv Us Amhow The universal joint for the workpiece drive is worn.

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm Giodef Ep Diopfx Amhjw feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW Gisdpjcl Svvofx Amhjw -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm Godpetv Ikljfx Amheiw max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Year of construction: 2009, condition: new, Belt dimensions: 2000x100 mm Belt speed: 30 m/s Angle adjustable from 30 to 90° Power: 3 kW, 4000 V, 50 Hz Weight: 200 kg Gisdpsx Davjfx Amhow Rollers for grinding reamers: 3/4"; 1/2"; 1"; 1 1/4"

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H Godpfjtzctmjx Amheiw No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: new, Technical specifications: Drill diameter: 13 - 32 mm Point angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Motor power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Features: - Ideal for grinding HSS/carbide spiral drills - Safe operation due to a guided grinding process - Point angle adjustable from 90° to 140° - Compact design, with collet storage in the machine and a handle for quick stowing - Includes a pointing device to reduce the feed force - Device for back-grinding the drill cutting edges to reduce friction between the drill and the workpiece - Rotor with precision ball bearings Scope of delivery: - CBN grinding wheel - 20 ER 40 collets, 13 - 32 mm - ER 40 collet holder Gjdped R A Dksfx Amhoiw