Used Hurco Vmx 1 for sale (156)

Condition: good (used), Year of construction: 2010, functionality: fully functional, X 3,200mm, Y 2,100mm, Z 920mm, ATC 40 pos, BT50 10,000Rpm. Bwedpfxoyglbxs Afnjh weight ca 35.000kg, delivery April 2026

Condition: not inspected (used), Year of construction: 1999, feed length X-axis: 760 mm, feed length Y-axis: 430 mm, feed length Z-axis: 500 mm, Ultimax 3 with 4th axis BT 40 spindle 8000 rpm spindle speed Bsdpfevgbrvox Afnswh 760x430x500mm stroke 24-tool changer 860x508mm table

Condition: used, Year of construction: 2022, x-travel 1350 mm y-travel 950 mm z-travel 600 mm Control MAX 5 Bwsdpfx Asxfwg Nofnjh total power requirement 35 kW weight of the machine ca. 14 t dimensions of the machine ca. 3100x4535x3495 m

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 13 m/min, feed rate Y-axis: 13 m/min, feed rate Z-axis: 13 m/min, nominal power (apparent): 34 kVA, torque: 165 Nm, controller manufacturer: Milltronics, controller model: DGI 9000, table width: 1,680 mm, table length: 762 mm, table load: 1,900 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,900 kg, distance table center to spindle nose: 710 mm, spindle motor power: 18,000 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New price of the machine: 184,300 EUR!!! Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer's expense) Operating materials are provided by the buyer. Bsdjyf Hpnjpfx Afnswh - Big Plus® spindle 70 mm 15,000 rpm with ceramic bearing including electronic spindle cooling - Expansion compensation of the milling head - heat sensors and patented algorithms automatically compensate for the thermal expansion of the milling head. Note: The compensation works best in conjunction with glass scales - Glass scales in X, Y, Z axis - IKZ cooling through the spindle 20 bar, with rotary union and additional tank with filter - Programmable air cooling through the spindle - IKZ preparation for Milltronics IKZ system (allows easy on-site installation of the Milltronics IKZ system) - IKZ preparation for ChipBlaster® IKZ system (allows easy on-site installation of the ChipBlaster® IKZ system) - Programmable minimum quantity lubrication - Programmable air cooling - LCM 4th axis model TDE-MV-200 complete with controller and motors - LCM 4th axis model TDE-MV-250 complete with controller and motors - LCM 4th axis model TDE-MV-350 complete with controller and motors - 5AX LCM-BSC-200 complete with controller, motors and Cables - 4th Axis Electrical Package with 1kW Servo Controller - Milltronics M-170 (170mm) Rotary Table with Servo Motor and Cable - Requires 4th Axis Electrical Package - Milltronics M-200 (200mm) Rotary Table with Servo Motor and Cable - Requires 4th Axis Electrical Package - Milltronics M-250 (250mm) Rotary Table with Servo Motor and Cable - Requires 4th Axis Electrical Package - Milltronics TS-A135 Tailstock For M-170 Rotary Table - Milltronics TS-A160 Tailstock For M-200 Rotary Table - Milltronics TS-B185 Tailstock For M-250 Rotary Table - 180mm 3-Jaw Chuck with Adapter Flange - For Milltronics M-170 and M-200 Rotary Tables Only - 230mm 3-Jaw Chuck with Adapter Flange - For Milltronics rotary tables M-250 - Tsudakoma 4th axis model RNE-160R with motor - 4th axis electrical package must be ordered separately - Tailstock for Tsudakoma RNE-160R - Tsudakoma 4th axis model RNE-200R with motor - 4th axis electrical package must be ordered separately - Tailstock for Tsudakoma RNE-200R - Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool measuring probe with optical signal transmission and macros - Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros - Renishaw OMI-2T included OTS tool measuring probe with optical signal transmission and macros - Renishaw NC4-F300 contactless tool measurement

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: AC, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, travel distance X-axis: 330 mm, travel distance Z-axis: 2,130 mm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine including delivery and assembly: 119,500.00 EUR!!!!! Machine is available immediately and NEW. Unloading of the machine and installation on site by the buyer. Machine details: · Milltronics 9000-DGI CNC control · 15" LCD color touchscreen · Ethernet interface · USB interface · Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI desktop · Connection for external keyboard · Electronic handwheels for manual operation, teaching or automatic operation · Personalized macros available · Override potentiometers for axes and spindle · Spindle load control · Key switch to lock the EDIT function · Lights to display the operating status · Additional "M" function with CNC waiting channel · Constant cutting speed · Rigid tapping · Spindle speed 30 - 1600 rpm · Spindle motor 18 / 11 kW 2-stage electronic gear · Spindle nose type A1-11 · Tool turret with 8 positions 25 mm · One axial tool holder for standard tools 25 mm x 25 mm · One tool holder for 38 mm boring bars · Automatic lubrication system · Full enclosure with sliding doors · Coolant system with pump · CE certification · Instruction manual, spare parts list and wiring diagrams in digital format · Operating manual and maintenance manual in digital format · Transformer for standard industrial power network with 400 volts, 3 phases · Brackets for lifting the machine with a crane Optional accessories: Manual three-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic three-jaw chuck with hydraulic unit ( diameter 300 mm - bore 70 mm ) Fixed steady rest with rollers range 20 - 200 mm Fixed steady rest with rollers range 180 - 410 mm Traveling steady rest Brass supports range 20 mm - 200 mm 38mm Boring bar holder for turret 25mm Axial tool holder Bedpfjyf Hnqex Afnewh Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 102 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,125 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 15,000 W, spindle nose: Big Plus ISO 40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available from stock. Transport from the warehouse in the Netherlands or Czech Republic by the buyer. Other machine sizes available including screw chip conveyor and all software options such as • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touch screen monitor • 120 GB solid state hard drive • 4 GB RAM memory • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop optional accessories: Bsdpfx Asx Akgwofnjwh IKZ cooling through the spindle 20 bar, with rotary union and additional tank with filter Programmable air cooling through the spindle IKZ preparation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ preparation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis model TDE-MV-200 complete with controller and motors LCM 4th Axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors and cables 4th Axis Electrical Package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-200 (200mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-250 (250mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics TS-A135 Tailstock For M-170 rotary table Milltronics TS-A160 Tailstock For M-200 rotary table Milltronics TS-B185 Tailstock For M-250 rotary table 180 mm three-jaw chuck with adapter flange (For Milltronics rotary tables only M-170 and M-200) 230 mm three-jaw chuck with adapter flange (only for Milltronics rotary tables M-250) Tsudakoma 4th axis model RNE-160R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis model RNE-200R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool measuring probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool measuring probe with optical signal transmission and macros Renishaw NC4-F300 contactless tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block of 4 Programming manual in paper format Machine manual in paper format

Condition: used, Price: On request CNC Digital type: UNIMAX Number of axes: 3 Travel x: 1020mm Travel y: 510mm Travel z: 610mm Min. Spindle speed: 80rpm Max. Spindle speed: 8000rpm Table: 1220x510mm Motor power: 15kw - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Bwjdpewnhrwjfx Afneh - Drive system: CNC - Power [kW]: 15.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 610 - Table length [mm]: 1220 - Table width [mm]: 510 - Min. spindle speed [rpm]: 80 - Max. spindle speed [rpm]: 8000 - Options: Digital readout - └ Type of digital readout: UNIMAX Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Working Area Travel X: 820 mm Travel Y: 550 mm Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Tool holder: SK40 NC Rotary Table Bodpsyap Tfofx Afnowh Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Equipment Chip conveyor Coolant supply Direct path measuring system Through-spindle air 5-axis simultaneous capability Workpiece measurement Tool measurement High-pressure coolant (IKZ)

Condition: used, Year of construction: 2011, X-Axis: 2032 mm Bwjdpfx Asmn If Djfnsh Y-Axis: 660 mm Z-Axis: 610 mm spindle speed: 12.000 U/min. with internal coolant power: 18 kW tool holder: SK 40 40 places table load: 2.700 kg machine weight: 18.000 kg operating hours: 11.417 hrs spindel hours: app. 5.000 hrs. (maximum) spindle changed in year 2020 - Technical error and prior sale is reserved. -

Condition: like new (used), Year of construction: 2019, operating hours: 3,450 h, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 525 mm, turning diameter: 356 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, Machine in excellent condition. Year of manufacture: 2019. TM8i machine specifications Travels and working range: Distance between centers: 597 mm Swing over bed: 525 mm Swing over cross slide: 300 mm Maximum turning diameter: 356 mm Maximum turning length: 525 mm Maximum bar diameter: 64 mm X/Z axis travel: 203 / 550 mm Bwedpfeyfhynjx Afnsh Spindle: Maximum spindle speed: 4,000 rpm Maximum torque (high gear): 133.83 ft·lbs at 1,000 rpm (100.7 Nm at 1,000 rpm) Spindle power: 25.48 hp (19 kW) Spindle nose: A2-6 Chuck diameter: 210 mm Turret: Tool type: slotted disk Capacity: 12 stations Indexing time (adjacent stations): 1.3 s Indexing time (furthest stations): 3.6 s Feeds: Rapid traverse X/Z axes: 30 m/min Dimensions: Maximum installation area: 4336 × 3114 mm Machine height: 2193 mm Machine weight: 4,030 kg Workpiece gripper dimensions: 150 × 95 × 70 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Bwedjp I Hanepfx Afneh

Condition: used, Year of construction: 2006, 2006 Hurco VM1 Vertical Machining Centre YOM: 2006 Technical Information – Hurco VM1 VMC General Data Measurements width: 1800 mm Measurements depth: 1900 mm Measurements height: 2600 mm Machine weight: 2700 kg Main drive Number of spindles: 1 Spindle speed range: 40-8000 1/min Spindle motor power: 11 kW Bwsdpfev Suwisx Afnoh Movement X-AXIS Movement: 660 mm X-AXIS Working Feed: 8 m X-AXIS Rapid traverse: 20 m X-AXIS Accuracy: 0.005 Y-AXIS Movement: 350 mm Y-AXIS Working Feed: 8 m Y-AXIS Rapid traverse: 20 m Y-AXIS Accuracy: 0.005 Z-AXIS Movement: 450 mm Z-AXIS Working Feed: 8 m Z-AXIS Rapid traverse: 20 m Z-AXIS Accuracy: 0.005 Workpiece Workpiece weight: 350 kg Table Outer length: 762 mm Outer width: 356 mm Delivery & Siting available at extra charge – Please ask for price.

Condition: ready for operation (used), Year of construction: 1997, Main Drive Spindle speed range 80 to 8000 Spindle motor power 5.5 kW Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 460 mm Z-Axis Movement 610 mm Additional Equipment Lehman 4/5-axis dividing machine, diameter 200 mm Fully protective cabin with sliding door Bwodpfx Aox D D Rlofneh This 5-axis Hurco BMC 30HT/M was manufactured in 1997, featuring a Lehman 4/5-axis dividing head with a 200 mm diameter. It includes a CNC Ultimax 3 control, a tool changer with 24 positions, and a spindle speed up to 8000 rpm. The machine offers X/Y/Z travel paths of 760/460/610 mm and a rapid traverse of 24 m/min. Consider the opportunity to buy this Hurco BMC 30HT/M vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2020, Used 2020 Hurco TM8i CNC Lathe in great condition with low spindle hours and full service history. Equipped with Hurco WinMax Control for easy programming and high-speed machining. The machine can be seen under power in our showroom. Compact, high-performance lathe designed to meet your production requirements. - Hurco WinMax Control – Advanced, user-friendly CNC control system designed for maximum productivity and ease of use - High-Performance Spindle – Delivers smooth, stable operation for exceptional turning precision - Rigid Construction – Designed for reliable performance and accuracy over the long term Machine Specification: CAPACITY - Distance Between Centers: 23.49 in (597 mm) - Swing Over Bed Diameter: 20.67 in (525 mm) - Swing Over Cross Slide Diameter: 11.8 in (300 mm) - Max Turning Diameter: 14 in (356 mm) - Max Turning Length: 20.67 in (525 mm) - Max Bar Capacity: 2.5 in (64 mm) - X, Z Axis Travel: 8 x 21.65 in (203 x 550 mm) SPINDLE - Max Spindle Speed: 4,000 rpm - Max Torque (High Gear): 133.83 ft-lb @ 1,000 rpm (100.7 Nm @ 1,000 rpm) - Spindle Power: 25.48 hp (19 kW) - Spindle Nose: A2-6 - Chuck Diameter: 8.2 in (210 mm) TURRET - Tool Type: Slotted Disc - Tool Capacity: 12 Stations - Turret Index Time (Adjacent): 1.3 seconds - Turret Index Time (Furthest): 3.6 seconds FEEDRATES - Rapid Traverse (X, Z Axis): 1,181 in/min (30 m/min) SIZE - Max Operating Floor Space: 170.7 x 122.6 in (4,336 x 3,114 mm) - Machine Height: 86.32 in (2,193 mm) - Machine Weight: 8,885 lbs (4,030 kg) - Parts Catcher Dimensions: 5.9 x 3.7 x 2.8 in (150 x 95 x 70 mm) This Hurco TM8i CNC Lathe is perfect for businesses seeking a compact yet powerful machine for precision turning tasks. Its advanced control system and rigid construction ensure high-quality results and increased productivity, making it ideal for both small and medium production runs. For more details or to schedule a viewing, please contact us. Control: Hurco Winmax Spec: Spindle bore 64 mm | Max Swing 356 mm | Travel X 203 Z 550 mm Bjdjwkwdnopfx Afnswh Accessories: Tailstock, tool setter, parts catcher & swarf conveyor

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Bwsdpfxsw Nklhs Afnsh Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel Bedpfjtrhq Hjx Afnowh - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Bedpfx Aswzy N Ijfnewh Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Tool magazine for 24 tools, SK 40 DCF software

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the Bwsdpfx Afsxtfz Djnsh scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2017, Machine has 2,500 spindle hours Bwsdpjxzch Djfx Afnoh Hurco VM 30 i, Year of manufacture: 2017, Control: Winmax 5, Travel X/Y/Z 1100/510/510 mm, Tool changer with 20 stations, Taper SK 40, Spindle speed up to 10,000 rpm, DXF interface, High-pressure cooling IKZ 15 bar, Chip conveyor, Vacuum clamping system as new – 1 month old,

Condition: used, Year of construction: 2014, turning diameter over bed 0508 mm Bjdpfx Aev T Np Ajfnswh turning length 724,5 mm control Ultimax Hurco turning diameter over bed slide 336 mm spindle turning speed - stepless 0- 4500 U/min- rpm spindle bore 65 mm feeds 0-30 m/min rapid power traverse in X-and Z direction 30 m/min voltage 400 V connected load 30 KVA face slide travel 203,2 mm longitudinal travel 580/640 mm dimensions of the machine ca. 4,3 x 2,1 x 2,6 m toolpiece turning speed range 0- 5000 U/min work piece power 5,5 kW main drive motor 15/22 kW weight of the machine ca. 5,6 t c-axis 360 x 0,001 ° With 12 position turret head with live tooling (C- axe), sub spindle, power chuck, cooling arrangement and chip conveyor. Control: Hurco Ultimax. With many accessories.

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 610 mm Travel distance Y :510 mm Travel distance Z: 610 mm Number of axis: 4 milling machine / machining center spindle revolutions: 12000 rpm Bsdpfexdnkcjx Afnjwh table size X: 760 mm table size Y: 510 mm max. workpiece weight: 1000 kg input Power : 9 kW Control unit Ultimax 4

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 704-0101-809, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control: ULTIMAX 4 X-axis: 800 mm Y-axis: 700 mm Z-axis: 510 mm Rapid traverse (X/Y/Z): 35 m/min A-axis: ± 30° / 110° Rapid traverse A-axis: 16.5 m/min C-axis: 360° Rapid traverse C-axis: 16.5 m/min Spindle Speed range: 10 - 12,000 1/min Spindle motor: 18 kW Tool Tool holder: SK 40 Tool stations: 32 Working area Max. table load: 300 kg Table size: 610 mm x 5 mm x 5 mm Bodpfx Afsxamfkenewh MACHINE DETAILS Machine weight: 12,500 kg Space required (LxWxH): 2.700 m x 4.000 m x 3.250 m

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz Bsdpjw Tdiuefx Afnewh - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 25 kVA, controller model: Ultimax 4, table width: 1,220 mm, table length: 510 mm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Hurco BMC 4020 CNC Milling Machine Ultimax 4 Control Travel X 1,020 mm, Y 510 mm, Z 610 mm Clamping Area 1,220 x 510 mm Tool Positions 24 x SK40 Spindle Speed 80-8,000 rpm Bwjdpfswa T Inex Afnsh Coolant System Please contact us if you are interested.

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, machine/vehicle number: SC54G2E20145DMFCS, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 920 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, controller manufacturer: WinMax, workpiece weight (max.): 11,000 kg, spindle speed (max.): 6,000 rpm, HURCO 3-Axis Double Column CNC Vertical Milling Center DCX 32i (SK 50) _____ Technical specifications: • X-axis travel – 3,200 mm • Y-axis travel – 2,100 mm • Z-axis travel – 920 mm • Work surface: 3,000x1,700 mm • Maximum table load: 11,000 kg • Main spindle speed: 6,000 rpm • Main spindle holder: SK 50 • Main spindle torque: 570 Nm Base configuration: • Main spindle cooling system; • Wired remote control; • Centralized automatic lubrication system; • ATC tool magazine with arm; • Chip conveyor with scraper; • Chip conveyor with rake; • Machine interior washing system; • Coolant/compressed air gun; • LED-illuminated work area; • Heat exchanger in electrical cabinet; _____ Included options: • Ulti-Motion - functions for reducing machining time. Cutting speed increases by 2.5 in curve/edge areas. Unlimited lookahead lines, automatic vibration reduction from cutting conditions, improved surface quality. Bwjdpfx Aox Shg Njfnsh • Solid - Import. Option to import Step files, create contours from 3D model, automatic detection of pockets and islands, manual part origin displacement • Simultaneous 4/5-axis machining in NC mode. Requires post-processed programs in CAM application. • Through-spindle coolant CTS20 (20 bar) • Workpiece measurement with probe, radio connection (Renishaw RMP 60-Q) Installation | Training | Does not include transportation