HUNDEGGER K2 4 assi

HUNDEGGER K2 4 assi

Condition: used, Year of construction: 1980, machine/vehicle number: GUS 71 Typ 26.813, Full frame saw from Wusterer & Dietz including: Frame saw Saw tensioner Riving knife Fpsdpjv Ummbjfx Aivjn Frame roller conveyor 4-strand puller Viewing by appointment.

Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Completely overhauled in 2022 and not reassembled afterwards Minimum diameter: 14 cm Maximum diameter: 90 cm With conveyor systems for infeed and outfeed Immediately available – Fully overhauled Location: Austria, near Linz Fpjdey Iabdjpfx Aiven

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm Fedpjfw Rt Rjfx Aivepn 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year of Manufacture 1975 with control panel in the cabin, bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, max. saw blade width 310 mm, bandsaw blade length 11,500 mm bandsaw size 11495x310x1.85x55 log infeed system approx. 20 m long, four-strand system with inserter block carriage with ejector onto block cross conveyor CANALI pneumatic clamping carriage, Type 501.09 with 4 clamping jaws, 3 log turners, 4 ejectors, drive power 100 kW, carriage speed 5-120 m/min. powered roller conveyor with slab removal with brush, lifting device with puller for trimming Fpsdpfx Aioxvrnisven complete electrical switchgear cabinets complete sharpening room equipment for bandsaw blades

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm Fodpfxoimwtre Aivspn - volt. 380/50 - s/n 06 - CE rules (year 1998)

Condition: used, Year of construction: 1970, functionality: fully functional, Complete, fully operational sawmill line for sale due to restructuring. Fpodpfsx E Sn Dsx Aivon The entire system can also be purchased in individual components. Price upon inspection.

Condition: excellent (used), functionality: fully functional, Essetre machining center, model Techno PM, with 5 axes. Spindle: 12 kW, liquid-cooled, 1,000-18,000 RPM. 2 automatic tool changers, each with 9 positions. HSK 63F. Working height: 800 mm. Fodpfx Aiew S Naijvjpn Working width: 400 mm. Machine available for immediate delivery.

Condition: used, Bacci Double Rounding Tenoning Machine with Loader Fsdpfxopk Ta Rj Aivopn

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Fsdjya Dc Iopfx Aivopn Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: used, Year of construction: 2002, functionality: fully functional, We are offering this operational Hundegger K2-5 62.5 mm cutting machine, manufactured in 2002, for sale. The machine was reassembled at the new location by Hundegger in 2021. The safety features have been updated to the latest standards (€17,000) and the machine has been serviced. From 2021 to early 2022, the machine was completely rebuilt by Hundegger and approved for operation. The company declared insolvency in 2025 and the property was sold. Consequently, the K2, including the HEA 200 support beam and chip extraction system (pusher system), was completely dismantled in operational condition and removed from the site by Hundegger. Invoices for the K2 (2002), safety features, saw blade, milling heads, support blocks (2025), etc., can be provided upon request. The K2 was fully functional, preserved, and dismantled at the Hundegger site and is now in storage. Transport requires 2 semi-trailer trucks, approximately 28.5 tons. Loading can be arranged for approximately €4,000. Manufacturer: Hundegger Model: K2-5 625 Year of Manufacture: 2002 Condition: Operational Category ID: 156 Type ID: 2209 Machine Type: Cutting Machine - Undercarriage pivoting miter saw Fedpszrazcefx Aivjpn - Universal milling unit, 5-axis (UF5) - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 1x Vertical finger milling machine, 5.5 kW - 2x Drilling unit, 2.2 kW Drilling unit, swiveling 30° (3.0 kW) - drilling direction horizontal - Combination support for horizontally operating tools - 1x Drilling unit, 2.2 kW - drilling direction horizontal - 1x Drilling unit, swiveling 30° (3.0 kW) - 1x Grooving unit, 7.5 kW Space available for an additional main unit. Control system: KI 2 – KI 3 Additionally, a cabinet with consumables such as lubricants, grease, and rollers is included. A new roller cutter, dovetail cutter, grooving chain, and replacement cutting inserts for the tools are available, as documented by an invoice for €3,800. All necessary documentation from Hundegger for the installation and operation of the machine is available.