Used Hot Laminatio Machine for sale (67,137)

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm Tjdpfxsvxlufj Akiod capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2026, HOT AIR GENERATOR by wood model F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery for machines in prompt delivery we grant you Price List year 2024 -35% OFF . Promotional Sumer 2026 CE regulation: YES EC Declaration of Conformity: YES Instruction manual: YES Indicative surface to be heated F28 : sqm. 100/150 Indicative surface to be heated F55CV : sqm. 300/350 Indicative surface to be heated F85CV : sqm. 450/500 Todpoh U A Uasfx Akijd Indicative surface to be heated F120CV : sqm. 600/700 ndicative surface to be heated F240CV : sqm. 1.000

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M50E/9046, Offer Number: M50E/9046 Machinetype: hot rolling machine Make: SKF Type: EMB 110 Constr. year: 2001/2021 Todpfx Aew Nxiuokied diameter range: 110 mm max. outside dia. of round pieces: 110 mm kind of heating: 335 KW Location: Europe

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Tsdpfxjxp Ntvs Akiod Photos show machine in production before reconditioning

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system). Tjdpfx Aewabbvokied

Condition: like new (used), functionality: fully functional, total width: 15,000 mm, total length: 240,000 mm, total height: 9,000 mm, Model: Saxon 5 Manufacturer: Fischbein Machine type: Continuous hot‑air bag sealer Tjdpfx Akoz H T Dwoijd Power: 220V single‑phase, 66 A Typical use: Sealing pillow‑style heat‑sealable plastic bags in fast‑paced production lines

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, wire working range: 0,1 - 2,0 mm cutting length: 5 - 50 mm output: 600/min. Tsdpfxjzwdggj Akied complete with ciller and motorized decoiler

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available Tedpfx Akszmh Awoisd - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: used, Year of construction: 2012, machine/vehicle number: ET192, Used Hot Melt Labeling Machine Kosme 20000 bphTechnical Specifications & Performance DataThis Kosme TOP 2 HM 16 720 is a high-speed hot melt labeler engineered for reliable performance in beverage production and industrial packaging. Optimized for PET containers, it supports demanding operations on a used bottling line while maintaining label accuracy at elevated speeds.Manufacturer: KosmeModel: TOP 2 HM 16 720Year: 2012Formats: Round PET bottle, 74mm diameter. ( can work both round and square bottle).Application: Hot melt labeling for PET containersProduction speed: up to 20,000 bottles per hour (format-dependent)Labeling stations: 1Number of plates: 16Head adjustment: availableOptical centering system: includedContainer types: PET (primary configuration)Dimensions: W 1900 mm × L 3000 mm × H 2300 mmWeight: 2500 kgElectrical: 400 V, 50 Hz, 9 kWCondition: in storage (second hand machine)Documentation: manuals availableAdvanced Automation & Control SystemsDesigned for consistent, repeatable operation, this Kosme labeler features precise hot melt application for cylindrical PET bottles and adjustable settings to support changeovers across standard beverage formats. The machine incorporates standard safety features and a centralized control interface for monitoring key parameters during labeling.Hot melt application system engineered for strong, clean adhesion at high speedOperator controls for format adjustments and production monitoringElectrical supply: 400 V, 50 Hz, 9 kW connected loadIntegrated safety protections to safeguard operators and uptimeProduction Line Integration CapabilitiesThis unit integrates smoothly into a complete used bottling line with upstream rinsing and filling systems and downstream capping, inspection, and packaging equipment. Standard connections and communication signals facilitate synchronization with conveyors, accumulation tables, and quality control devices.Compatible with common beverage line components: rinsing, filling, capping, conveying, and inspectionFormat change support via head adjustment and plate configurationSuitable for multi-SKU operations within PET bottle familiesCan operate in beverage production environments for water, juice, beer, wine, and moreMachine Condition & Maintenance HistoryThe machine is currently in storage and offered as second hand equipment. It presents a solid platform for rapid deployment when a dependable labeling solution is needed. Manuals are included to support commissioning, operation, and preventive maintenance routines. Physical inspection and test runs can be organized as part of the purchasing process for verification.Operational Performance & VersatilityWit... Todpfxsvguc Is Akied

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, We offer a drum-type shot blasting machine with a rubber belt – COGEIM TG1, a machine equipped with a magnetic separator. Year of manufacture – 2015. Overall height – 4595 mm. Drum diameter – 700 mm. Tjdpfxsztp Ino Akiod Drum working load – 200 kg. Turbine power – 5.5 kW. Automatic filter. Total operating hours – 10500. The machine can be operated both manually and automatically. Complete documentation is available for the machine. The machine is currently disassembled and stored in a warehouse. Shot blasting machine, blasting, sandblasting, shot blasting, sandblaster.

Condition: good (used), machine/vehicle number: 169693, Heidelberg embossing platen TP, machine number T169693 + Heidelberg embossing platen TP, T191298, machine is in good condition, available immediately. Tjdpfevvikfjx Akisd If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment.

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol Todpfjyzt D Esx Akijd 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Condition: used, Year of construction: 1994, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN Tsdpfjtuxmyjx Akied ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: as good as new (ex-display), Year of construction: 2025, Parts cleaning machine / spray cleaning system, type L102 Automatically operating hot water parts washing machine with basket drive via geared motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. Insulation of the entire system included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 250 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature - 90°C) Tedpjhl H Uuefx Akisd System dimensions (L x W x H): 1,300 x 1,250 x 1,990 mm Empty weight: approx. 300 kg Wash cycle timer, freely adjustable (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the entire system (tank and cabinet) made of stainless steel 1.4301 Mechanical lid locking Tank cover with fine filter (2,000 microns) 2 suction filters as pump protection Operating hour counter Steam extraction including condensate return The parts washing machine is in new condition (test system / pilot system) This offer is non-binding and subject to change. Modifications, errors and prior sale expressly reserved.

Year of construction: 2001, condition: excellent (used), Gietz FSA 790 EFF, year of manufacture: 2001 Technical specifications: - MABEG feeder - 2 x transverse foil - 3 x longitudinal foil - Hot foil embossing (2 x honeycomb plate) - Die-cutting (additional die-cutting tool) Tjdpfxszd T Hpj Akisd - Hologram option (electronics refurbished in 2020) - 6 heating zones Technical details: - Maximum sheet size: 790 x 560 mm - Minimum sheet size: 297 x 210 mm - Maximum stamping area: 720 x 520 mm - Speed up to 5,500 sheets/hour

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Todpfoz St Hwox Akisd Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L102 Automatically operating hot water parts washing machine with basket drive via geared motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 250 kg - Spray pressure: 2 x 3 bar Tsdpfx Asdz Dy Hokisd - Tank volume: 175 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,300 x 1,250 x 1,990 mm Unladen weight: approx. 300 kg Wash time timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and outer casing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking system Bath cover with fine filter (2,000 microns) 2 suction filters as pump protection Operating hour counter Steam extraction with condensate return Parts washing machine is in new condition (test system / pilot plant) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!! This offer is non-binding and subject to change. Changes, errors and prior sale expressly reserved.

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Tsdpfxjz Iz Ime Akisd Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Todpfxozzzm Ej Akijd Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Tsdpfx Asy Avh Nokied Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: used, Nordson Problue Hot Melt Pump Model - Problue 10 Facility to connect up to 6 hoses 10kg Tank Capacity Tjdpowq Suusfx Akied

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Tjdpfx Asz R Rbdekijd Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, total width: 1,325 mm, total height: 3,250 mm, total length: 3,735 mm, overall weight: 5,000 kg, We offer a table-type shot blasting machine – Škoda TMSO 2.4/5. Todpoz Dfuvsfx Akijd The machine has 2 rotating tables with a diameter of 1000 mm. It features one turbine with a power input of 7.5 kW. The machine is in excellent condition, fully functional, and can be tested in operation.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M50E/9044, Offer Number: M50E/9044 Machinetype: hot rolling machine Make: SKF Type: EMB 200A Constr. year: 1980/2021 diameter range: 200 mm Tedpfx Aow E N Saokied max. outside dia. of round pieces: 200 mm kind of heating: 200 KVA Location: Europe

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. Tsdpfsh A Hbxsx Akiod The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product.