Hot rolling machine

SKF EMB 110

Year of construction: 2008, condition: used, pressure 315 t Iisdordi Dlspfx Aa Esk stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm Iiodpfxjw T Sc No Aa Eok WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2009, CNC controller: M720BM Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 (100) Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 923,8 Swing over cross-slide mm: 755 Bar work capacity mm: 80 C-axis degree: 0,001° Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 (3 min/cont) Indexing time s: 0,25 Main spindle Speed ​​spindle rpm: 4.000 Drive power spindle kW: 18,5/15 (25% ED/cont) Spindle bore mm: ø91 Tailstock Tailstock travel mm: 734 Isdpfsxcqz Isx Aa Ejik Holder: MT5 Equipment Chip conveyor Tool measuring arm

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 Isdour N Daspfx Aa Ejik The machine is ready for immediate use!

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 39035, National Machinery 750 S3 Operational - Working 5 FORGING STATION Supplied with control process and soundproof cabin Machine Size: 750 S3 Number of dies and punches: 5 Total heading load (kN): 2730 Number of strokes/min. (min/max): 90 Cutoff diameter: 22 mm. Cutoff length (min/max): 4,75/80 mm. Iiodpjtnhp Rsfx Aa Eok Kickout stroke - die (min/max): 19/100 mm. Kickout stroke - punch: 52,4 mm. Motor size (kW): 55 Net weight (kg): 41.500

Condition: used, Year of construction: 1988, Technical details: pressure: 630 t plate thickness: 16 mm Total force (nominal): 630 to stroke: 30 - 150 mm knife-edged ring capacity: 320 t Nominal force: 160 t : 910 x 1050 mm : 900 x 900 mm dayligth: 410 mm ram adjustment: 120 mm plate width: 40 - 450 mm plate thickness: 0,5 - 16 mm Iisdpfx Aajvmht Hj Esk : 1 - 1000 mm total power requirement: 100 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 4.50x2.20x2.80 m Press Feintool + feeding unit *

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Iedpfx Ajt Hw D Dea Esik Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 2001, machine/vehicle number: 01/2437, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Iodpfx Aaou U Nimj Eeik Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Standard configuration Automation roll-off try with leveller

Condition: refurbished (used), Year of construction: 1998, operating hours: 20,800 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Machine currently undergoing revision at our facility in Semsales, Switzerland. Erowa ITS50 chuck. 16-position rotary tool changer, double gripper. Flat LCD screen. Retractable work tray. Inspection possible upon request. More details available on request. Isdpexlhudsfx Aa Esik

Condition: used, Year of construction: 1999, Press force 250 tons, currently disconnected and ready for transport, table 1.5 x 1 m, in good condition. Ijdpfx Aewvbilsa Eeik