Used Hot Chocolate Machine for sale (91,866)

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits Prsdpfx Ajxqzmkoa Eof The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: like new (used), Year of construction: 2008, operating hours: 104 h, functionality: fully functional, machine/vehicle number: 42603/08, pressure: 8 bar, operating pressure: 6 bar, total width: 3,000 mm, total height: 5,200 mm, total length: 6,800 mm, inner dimension width: 1,100 mm, inner dimension length: 6,800 mm, inner dimension height: 500 mm, filter area: 1 m², input current: 95 A, input voltage: 380 V, control cabinet width: 1,200 mm, control cabinet length: 500 mm, control cabinet height: 2,200 mm, air pressure: 8 bar, passage height: 500 mm, space requirement width: 4,000 mm, space requirement length: 9,000 mm, space requirement height: 6,000 mm, power: 50 kW (67.98 HP), conveyor belt width: 1,100 mm, Rösler Shot blasting machine RRB 11/5, we used this machine only like backup. That are the reason why is working time very low and machine are completely correct. Prjdpfot N Sz Ajx Aa Eof

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW Psdpfeu Nu Nksx Aa Esrf total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: good (used), machine/vehicle number: 77195122251, Fastbind Elite XT Perfect Binder with Fastbind FotoMount F42 Photo Attachment, machine number 77195122251, in good condition, immediately available Description: Technical performance of the machine: Cycles/hour up to 450 Productivity: Books/hour up to 180 Min. / Max. thickness 0.1–50 mm Max. length 455 mm Max. cover thickness 400 g/m² Psdpfxexc Eq Ds Aa Esrf Voltage 220–240 V Machine dimensions (W / L / H) 1050 x 520 x 570 mm Weight 70 kg If interested, we are also happy to provide information about further machines available in our facility. You are welcome to inspect the machine at our premises by appointment.

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Podpfx Aasvkf Ags Eerf Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: ready for operation (used), Technical characteristics Gooseneck : 650 mm Veneer thickness : 0.4 to 2 mm Feed speed 9 m/min Total electrical power 0.18 kW (0.2 HP) Power and Motors Voltage: 220 V Pluging: Singlephased Podpfx Astx Hx Aea Eerf Power: 0,18 Kw Overall dimensions

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. Pjdpfjwaiv Uex Aa Ejrf -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Condition: used, functionality: fully functional, compressed air connection: 4 bar, inner dimension width: 800 mm, inner dimension length: 800 mm, inner dimension height: 1,200 mm, workpiece weight (max.): 500 kg, For sale: used overhead rail shot blasting machine from manufacturer Berger. Good used condition appropriate for its age. 2 blast wheels, connected load approx. 30 kW. Internal lining made of manganese steel. Bucket elevator belt has been replaced. Central lubrication. Circuit diagram and operating manual available. Machine can be inspected under power at location, 66802 Überherrn. Predpfxewphb Uo Aa Eof

Condition: used, Gietart Roller conveyor shotblasting machine Type: Roller conveyor Max. width of workpiece: 1500 mm Max. height of workpiece: 550 mm Pjdpfx Aaeidlq So Eorf Max. workpiece weight: 600-800 kg/m

Year of construction: 2023, condition: new, Machine height : ~4300mm Machine width : ~3400mm Machine length : ~3400mm Maximum work piece height : 1400mm Maximum hook capacity : 2 x 500 kg Number of blast wheels : 2 x 7.5kW E-Eco Frequency inverter for turbine : 2 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Modem : 1 pc Prodpfoi D Digsx Aa Ejf Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : PC4 (4.000m3/h) Total installed power : ~21kW This type of machine has all the electric cables on quick connectors, you only need three days and 2 mechanics.to prepare it for work. The machine is on stock. A test of the machine in our premises is possible with prior notice

Year of construction: 2000, condition: used, OMSG brand ROTOFLOW 170-N drum shot blasting machine with automatic feed tower, year 2000 Used drum shot blasting machine Continuous belt shot blasting machine for shot blasting of aluminum, brass or steel forgings, screws and bolts. Automatic feed tower. Inverter turbines Special valves with two positions Filter. Prjdot Ag Udjpfx Aa Eof

Condition: new, Year of construction: 2025, Dump belt blast wheel blast machine 11 kW direct drive indexing turbine with 8 throwing blades. Belt width 1000mm and Ø900mm Podohvikuepfx Aa Eorf

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly) Prodpstubz Ujfx Aa Eof

Year of construction: 1988, condition: good (used), CARLO SALVI 780/SV Fully functional, good conditions Prsdpfx Aaoigg N Hs Ejf YEAR 1988 Double Stroke Headers 6.35x80 mm, 360 ppm

Condition: excellent (used), Year of construction: 2017, We offer a table shot blasting machine TZS 1 Manufacturer: KOVO Staněk Table diameter: 1,100 mm Year of manufacture: 2017 Pjdpjwurhiofx Aa Ejrf Weight: 2,500 kg Very good condition.

Year of construction: 2025, condition: new, Drum Shot Blasting Machine; Predpfevliucjx Aa Eof The system consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Screen. Shot blasting is performed by having a rubber belt wound over three drums rotate the virtual barrel-shaped chamber while the turbine propels steel shot onto the workpieces. The blasting cabin is manufactured from ST-37 steel plate. Areas directly targeted by turbines (hot points) are reinforced with manganese wear-resistant plates, while other areas are supported with Hardox plates. (Complete manganese plate cladding is optional.) Wear-resistant claddings are designed with bolts to facilitate future part replacements due to wear. Replacement can easily be carried out by your company's authorized personnel. The wear-resistant plates are bolted for easy future servicing. Dimensions of the TK - 6 PREMIUM machine: Drum diameter Ø: 1000 mm, Length between discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 model Ø 320 mm, 7.5 kW motors. Equipped with a rubber belt conveyor.

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Podpfxevr Tbas Aa Ejrf Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~10,5 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Prodedtq Anopfx Aa Esf

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. - Diameter of rotary table – 1000 mm. - Maximum height of blasted part – 550 mm. - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. We also manufacture table blast machines with table diameter – 1500 mm. Pedswt T Uzepfx Aa Eorf Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Year of construction: 2025, condition: new, Pipe Shot Blasting Machine A pipe shot blasting machine is a specialized surface treatment system designed for cleaning, roughening, or preparing the inner or outer surfaces of cylindrical (pipe-shaped) metal parts. It removes rust, oxide, scale, burrs, and old paint coatings using high-speed abrasive blasting (with steel shots, grit, or sand). ⚙️ Working Principle Loading: Pipes are placed on a roller or conveyor system for easy movement. Transportation: The pipes are automatically conveyed into the blasting chamber via a roller conveyor or continuous feed line. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive material onto the pipe’s surface. During the process, the pipe rotates and moves forward, ensuring uniform cleaning across the entire surface. Cleaning and Recovery: The used abrasive is automatically collected, filtered, and reused. Dust and impurities are removed through an industrial dust extraction and filtration system. Podexuhrbopfx Aa Eorf CODE DIMENSIONS TURBINE CBK - 1 Ø 48 – 219 2 x Ø 320 CBK - 2 Ø 219 – 500 2 x Ø 320 CBK - 3 Ø 500 – 1000 2 x Ø 500 CBK - 4 Ø 1000 – 2000 2 x Ø 500

Year of construction: 2023, operating hours: 4 h, condition: new, machine/vehicle number: 017-2023, Machine height : ~2950mm Machine width : ~1500mm Machine width with open doors : ~2950mm Machine length : ~2950mm Table diameter : 1200mm Maximum work piece height : 500mm Predpfji Dprnex Aa Ejf Maximum table capacity : 500kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~10,5kW This type of machine can be assembled before delivery, it takes just a day to prepare it for work. Machine is on stock.

Condition: new, Year of construction: 2025, Dump belt blast wheel blast machine 7,5 kW direct driven indexing turbine with 8 throwing blades. Belt width 700mm and Ø600mm Psdpfeg S Rt Eex Aa Esrf

Year of construction: 2025, condition: new, Overhead Continuous Shot Blasting Machine? An overhead continuous shot blasting machine is an automatic surface cleaning system used mainly for removing rust, scale, paint, or other impurities from metal surfaces. In this system, the workpieces are suspended from an overhead conveyor line and pass continuously through a blasting chamber, ensuring high productivity and consistent quality. ⚙️ Working Principle Loading: The parts are hung on rotating hooks or hangers attached to an overhead conveyor line. Transportation: The conveyor automatically carries the parts into the blasting chamber. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive media onto the surface of the parts. This removes rust, scale, burrs, and old paint layers, leaving a clean, roughened surface. Rotation of the Hanger: The hooks or hangers usually rotate to ensure that all surfaces of the part are evenly blasted. Discharge and Recovery: After blasting, the parts exit the chamber. The used abrasive is collected and recycled, while dust is filtered through an efficient dust collection system. CODE W: x H: Turbine ASK-KON - 1 1.000 x 1.000 4 x F400 ASK-KON - 2 1.000 x 1.500 6 x F400 Podpfxexuhf Io Aa Ejrf ASK-KON - 3 1.000 x 2.000 8 x F400 ASK-KON - 4 1.500 x 3.000 12 x F400 ASK-KON - 5 1.500 x 4.000 12 x F500

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Predpfx Aexqqmasa Eef The machine is being auctioned due to business closure. Placing a bid obliges timely collection between 26/01/2026 and 29/01/2026! Contents include: 2 ALUP compressors RENNER refrigerated dryer another compressor FRIEDRICH DECKEL jig grinding machine

Condition: not inspected (used), functionality: unexamined, No reserve price - guaranteed sale to the highest bidder! The accessories are being auctioned off due to a business closure. Placing a bid obligates you to collect the items on time between 26.01.2026 and 29.01.2026! The lot consists of: Pedexqm Sxepfx Aa Ejrf 2 vices (jaw width: 125 mm) Milling table (table dimensions: 800 mm x 380 mm with 8 T-slots) Rotary table (diameter: 500 mm)