Used Hose for sale (2,405)

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Psdsz Snbcspfx Akiorc Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, resins, chemicals, detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Key advantages: the medium only comes into contact with the working hose, dry running capability, self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.

Condition: excellent (used), Professional mobile tank for storage and distribution of diesel fuel/light heating oil from the renowned German company Rietbergwerke GmbH & Co. KG. Robust galvanized steel construction, designed for transport by forklift. The tank is equipped with a 24V electric pump from HORN GmbH and a fueling nozzle. Ideal for: • Agricultural operations • Workshops • Transport companies • Construction sites • Fuel storage for machinery and equipment Technical specifications: • Manufacturer: Rietbergwerke GmbH & Co. KG • Tank capacity: 250 L • Year of manufacture: 1993 • Hazard class: A III • Test pressure: 3 bar • HORN GmbH fuel pump • Pump power supply: 24V • Power: 132 W • Current: 5.5 A • Maximum pumping height: 6 m • Suitable for diesel fuel and light heating oil • Fueling nozzle + hoses • Protective housing • Forklift-transportable • Galvanized steel construction Condition: Used item. Shows normal signs of use according to age and operation. Visual condition and completeness as shown in the photos. Predoz Smz Aepfx Akioc Included: • 250L tank • 24V pump • Hoses • Fueling nozzle • Transport frame.

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, waist belt, air hose, charger, Speedglas carrying bag, battery. Condition: used equipment, normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, complete set as shown in the photos. Psdpfx Aksz Sm Dqsiorc Applications: MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Shipping by courier or personal pickup is possible.

Condition: excellent (used), mileage: 686,003 km, power: 261 kW (354.86 HP), first registration: 04/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,510 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, power mirror, seat heater, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf spring suspension - Brake booster - Combination lights - DAB radio - Roof spoiler - Differential lock - Mast for visibility - Remote central locking - High beam headlights - Windshield - Enclosed cab - Speed limiter - Interior lights - Cab - Tilting hydraulics - Refrigerator/cooling drawer - Beacons - Air suspension - Air-suspended seats - Air horn - Motorcycle cover - MX engine brake - Parabolic spring suspension - Particulate filter - Radio/CD player - Radio/cassette player - Rotating beacon - Disc brakes - Sleeper cab - Hose connections - Seat heating - Sun visor - Stationary air conditioning - Blind spot camera - Automatic heating system - Tool box - Windscreen - Central lubrication system - Equipment transfer = Additional Information = General Information Number of doors: 2 Year of manufacture: 2021 Registration number: 91-BRH-7 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: 12T2210, automatic Axle Configuration Maximum front axle load: 8000 kg Rear axle 1: Lift axle; Max. axle load: 7500 kg Rear axle 2: Max. axle load: 11500 kg Weights Unladen weight: 8,749 kg Payload: 18,251 kg GVW: 27,000 kg Interior Number of seats: 2 Maintenance, History and Condition Pjdpfx Aez S Nbdskisrc APK (Technical Inspection): valid until 04.2027 Damage: none

Condition: used, Year of construction: 2011, overall weight: 1,622 kg, load capacity: 240 kg, arm reach: 2,700 mm, This is a used, tested welding robot system comprising a KUKA KR 240-2 2000 and a KRC2 ed05 controller from 2011, combined with a welding unit from SKS Welding Systems. The system is designed for industrial welding and automation applications and is typically used for arc welding, heavy-duty assembly operations, and combined handling/welding tasks. The robot has a payload capacity of 240 kg and a reach of 2700 mm, making it suitable for large-scale workpieces. The system is equipped with an SKS LSQ 4 welding power source featuring wire feeder, welding torch, and a complete hose package. Pjdpfx Aoy Nfl Dekiorc

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Psdsz R Tr Sepfx Akierc Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm Prsdpexgumcofx Akijc - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: excellent (used), General information Year of manufacture: 2016 Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Pjdpfevpq Thjx Akijrc Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer Atlas Copco/ Epiroc MB1500 from 2016 with Conti Lube, all bushes, seal kit, 2 guide plate small, 2 guide plate, 2 shock absorber, guide, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted. MB1600 MB1650 MB1700 MB1200

Condition: new, mileage: 500 km, power: 265 kW (360.30 HP), overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,450 mm, loading space length: 4,200 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, New municipal vehicle, MAN TGS 18.360 BL 4x4 all-wheel drive tipper truck with Meiller tipper body. Winter service equipment with municipal hydraulics and front mounting plate. New loading crane, Palfinger PK 9.501 SLD with hydraulic 4-section extension, radio remote control, and swivel head and grapple system with 5 + 6 control circuits. Full MAN manufacturer's warranty from the date of initial registration for 24 months up to 100,000 km. Truck specifications: 18,000 kg permissible gross weight 22,000 kg technically permissible gross weight 23,000 kg technically permissible gross weight plus option 9,000 kg permissible front axle load 10,000 kg technically permissible front axle load plus option, increased load capacity on front axle for winter service at max. 62 km/h (including tires up to 15%) 11,500 kg permissible rear axle load 13,000 kg technically permissible rear axle load Dual-circuit municipal hydraulic system Front mounting plate, size F1 Winter service lighting Heated front windshield TGS NN medium-length cab with rear window Wheelbase 3,900 mm Engine Euro 6 e Drive 4x4 Front axle as outer planetary axle, driven, switchable Differential lock in front and rear axle Meiller Trigenius D212 3-sided tipper for loading crane approx. 4.20 m x 2.45 m x 0.60 m high Front wall 0.80 m high Side walls, M-Jet, steel HBW 450, 2.5 mm Tipper bed made of steel HBW 450, 4 mm Load securing with floor and side wall lashing points Psdszthuaspfx Akierc Tipper side walls, pivoting and foldable Tipper rear wall, pivoting and foldable, with pneumatic claw locking Transfer gearbox MAN G172 with on-road and off-road mode MAN TipMatic 12.26 OD Transmission function MAN Idle Speed Driving Transmission function Rocking mode Driving program MAN TipMatic Performance up to 70,000 kg Driving program MAN TipMatic Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, maneuvering mode Air conditioning, Climatronic Auxiliary heater, 4 kW Trailer hitch, Rockinger Type 400 G 150A with compressed air connections Tipper hydraulic connection at the rear Front axle leaf-sprung and rear axle air-sprung Front axle 9,000 kg, AP axle Rear axle HP-1352, 13,000 kg, AP axle Stabilizer for front and rear axle Hill start assist MAN EasyStart TPM tire pressure monitoring system with tire temperature display Tire pressure indicator for trailer Preparation for alcohol interlock system Driver attention warning system MAN AttentionGuard Full brake assist system EBA Plus emergency brake assist system Lane departure warning system LDW LCS lane change assist and turning assist MAN Front Detection Distance warning Traffic sign recognition EBS ASR ES Cruise control High-performance engine brake MAN EVBec, adjustable 310 liter aluminum tank on the left Sun visor 2 rotating beacons and 2 work lights Compressed air connection in the cab with compressed air hose and gun Cool box in the cab Rear view camera MAN Reversing Motion System Reversing warning, audible, can be switched off when reversing gear is engaged Multi-function steering wheel MAN EasyControl Engine control panel, 2 functions can be operated from outside when the door is open Electrically adjustable and heated exterior mirrors MAN Media System Advanced 7 inch MAN Sound System Advanced Smartphone integration Preparation for radio with CB radio antenna on the cab roof 24 Volt battery management system Driver and passenger comfort seats, air-sprung with lumbar support, shoulder a

Condition: excellent (used), General information Year of manufacture: 2016 Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Prjdpfovpq Tbox Akiec Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1500 from 2016. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F905 incl. L436 fly jib and V20 winch!!! Tipmatik - automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Platform body with sideboards 6200x2550x600 mm Footsteps Diamond plate floor Removable sideboards 9 x LED lights Predj Ad Sw Repfx Akijc Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking Perforated side profile lashing points 2500daN Crane: FASSI F905R.2.7, with fully hydraulic 4-point outrigger system, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, tiltable sheave, quick coupling between main boom and fly jib, and more... TECHNO SERIES!! NEW CRANE MODEL Slew range infinite All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload protection with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied with piping Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable hydraulically on both sides, outrigger width 10.00m, Outriggers can be operated via radio remote control Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded transversely to the direction of travel Note: Observe the onboard voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block for the outriggers 180° hydraulically swiveling support legs / on both sides Preparation for operation with variable pump (LS) Control system for 2 additional functions with 2 hose lines / hxp-techno Additional knuckle arm (jib) L436, extendable hydraulically in 6 steps Jib Double Power (JDP) Multi-coupling with cable duct for jib mounted for 2 functions Control system for additional function - rope winch Rope winch type V20 - 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (jib) AWC - (Automatic winch Control) for crane - Automatic rope winch control AWC - (Automatic winch Control) for JIB - Automatic rope winch control Work spotlights can be operated via display or radio remote control 1 LED work spotlight mounted on the knuckle arm 1 LED work spotlight mounted on the jib LED for 2 outriggers, not mounted (crane) LED for 2 outriggers, not mounted (additional support strut) Electric rotary distributor with 14 slip contacts 1 zinc primer from 720RA to F820RA Zinc primer for JIB "L42" Additional cost for Dinitrol applicat

Condition: used, functionality: fully functional, machine/vehicle number: WSK00000001260445, empty load weight: 5,820 kg, maximum load weight: 26,680 kg, overall weight: 32,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 18,000 kg, permissible axle load (axle 2): 18,000 kg, first registration: 08/2011, loading space volume: 25 m³, total length: 8,640 mm, total width: 2,550 mm, total height: 3,570 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Attention: archive images! The vehicle may currently be in use! Predpfxsz Tzqye Akisc #Chassis tipper semi-trailer - Fine-grain steel welded construction - 2 drop-leg landing legs with round feet - 2 wheel chocks with holder - Rear underrun protection, folding - Half-shell mudguards on all axles - Anti-spray mudflaps on last axle only - 1 aluminium hook-on ladder with holder, at the side - 1 shovel #Axles + suspension - Disc brake axles - Air suspension #Braking system - 2 non-interchangeable coupling heads at front, without connecting line #Wheels and tyres - 385/65 R22.5", make at manufacturer's discretion - Steel rims, make at manufacturer's discretion #Electrics - Multi-chamber lights, amber LED side lighting - 2 white/red outline marker lights at rear - 2 x 7-pin sockets at front, without connecting cable - 2 additional LED work lights at rear #Hydraulics - High-pressure cylinder - Hydraulic operation via truck PTO - Hydraulic connection with hose #Bodies - Steel half-pipe body, inclined front wall with hydraulic cylinder mount, internal access steps on the right in direction of travel - Rear wall as pendulum tailgate - Cramaro sliding cover "Cabriole", automatic rear closure as folding bow. Cover structure begins ahead of the body opening. Cover with electric drive, tractor unit socket supplied loose, operation on the semi-trailer and by radio remote control. Note! Outer width of 2550 mm is exceeded by cover attachments. This is accepted in most EU countries! Observe the registration regulations of the respective country #Paintwork - Frame: grey - Landing legs: black coated - Body: yellow with lettering - Cramaro cover: yellow

Condition: used, Year of construction: 2008, Plasma power source for plasma cutting machine Manufacturer: Kjellberg Pjdpfszn Hp Sox Akisrc Type: HiFocus 80i Year of manufacture: 2008 Power: 80A Cutting thickness: 0.5 to 25 mm Includes hose package and torch Manual gas control panel 191026ä

Condition: used, Year of construction: 2012, Plasma power source for plasma cutting system Manufacturer: Kjellberg Type: HiFocus 440i Predpsz Ipnusfx Akijc Year of manufacture: 2012 Automatic gas control unit Includes cooling unit KWE360 Includes hose package with torch and cable 191026ä

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 10/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring Psdpfx Akoy R Ipnjijrc * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, maximum load weight: 33,500 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 08/2011, next inspection (TÜV): 04/2027, loading space volume: 32 m³, Year of construction: 2011, Equipment: ABS, Stock No. 5867 31.5 m³ Feldbinder silo semi-trailer for powdery and granular goods / 1 compartment / aluminum rims ----* Manufacturer: Feldbinder * Type: FEUT 32.3 - Silo semi-trailer * First registration: 08/2011 * Gross vehicle weight: 37,000 kg * Unladen weight according to vehicle registration certificate: 3,500 kg Prjdps Afr S Dsfx Akiec * Payload: 33,500 kg * Suspension: Air suspension * Axles: 3 x BPW, with 1st axle as a lift axle / disc brakes * Tires: 385/55 R22.5, approximately 60% tread, on aluminum rims * Color: Chassis RAL 3002 chimney red, silo container RAL 1013 pearl white * Volume: 31.5 m³ / 1 compartment * TÜV (technical inspection): 04/2027 * EBS Wabco * 2 discharge cones DN800 * De-aeration mats * Pressure tank 2 bar * Operating temperature from -40 degrees to +80 degrees * 1 top manhole cover DN450, swiveling and foldable * Pinch valves * 4 inch central discharge to the rear * Access platform with walkway on the rear left, can be erected from above * Continuous mudguards * Aluminum air reservoir * LED work lights * LED reversing lights * Rear storage box * Loading pressure gauge * 3 hose pipe boxes on the right * Without supports German semi-trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or information. We assume no liability for errors, changes, or intermediate sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, mileage: 1,023,189 km, power: 261 kW (354.86 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,275 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, total height: 3,900 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, power mirror, second fuel tank, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Android Auto - Apple CarPlay - Rear work lights - Front work lights - Heated mirrors - Heated exterior mirrors - Leaf spring suspension - Brake booster - Combination lights - DAB radio - Roof spoiler - Remote central locking - High beam headlights - Windshield - Closed cab - Speed limiter - Interior lights - Cab - Refrigerator / cooling drawer - Air suspension - Air-suspended seats - Motorcycle cover - MX engine brake - Particle filter - Radio/CD player - Radio/cassette player - Disc brakes - Sleeper cab - Hose assemblies - Side skirts - Sun visor - Voice control - Lane keeping assist - Stability control - Auxiliary air conditioning - Automatic heating system - Windshield = Additional Information = General Information Year of construction: 2018 License plate: 39-BKF-1 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: 12T2210, automatic Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70R22.5; Dual tires; Max. axle load: 11,500 kg; Suspension: Air suspension Predoz Hlfaopfx Akijc Weights Unladen weight: 8,332 kg Payload: 12,168 kg GVWR: 20,500 kg Maintenance APK (Periodic Vehicle Inspection): valid until 01.2027

Condition: excellent (used), mileage: 252,923 km, first registration: 08/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Media system - Particulate filter - Sleeper cab - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication = Additional Information = General Information: Usable material: Concrete Technical Information: Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 9,637 kg Axle Configuration: Front axle: Steered Rear axle 1: Dual tires Rear axle 2: Dual tires Functional: Superstructure manufacturer: DE BUF ST2 2-AXLE 10M3 CONCRETE MIXER High-pressure pump: Yes Water installation: Yes Water tank: 685 l Hoses: Yes Condition: Technical condition: Very good Predpfxjwhpvkj Akiec Optical condition: Very good DAF CF 510 6X4 TRACTOR UNIT WITH 2-AXLE SEMI-TRAILER WITH DE BUF 12 M3 CONCRETE MIXER EURO 6 L PACKAGE 510 HP DRIVE 6X4 AIR-SUSPENDED WHEELBASE 320 CM CF SLEEPER CAB WITH AIR CONDITIONING AND FRIDGE MANUAL TRANSMISSION ENGINE BRAKE 252,923 KM DE BUF 2-AXLE SEMI-TRAILER WITH 12 M3 CONCRETE MIXER 2 AXLES SAF AXLES LAST AXLE STEERABLE DRUM VOLUME 12 M3 2X WATER TANK CAPACITY 625 L CAPACITY 60 L WATER HOSE CENTRAL LUBRICATION SYSTEM FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES WE HAVE FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, mileage: 47,789 km, power: 294 kW (399.73 HP), first registration: 04/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering configuration RIGHT, with Rotorcleaner. Operating hours as of 31.12.24: 752. Total hours: 864h. Features: ASR, BrakeMatic, single-tone horn, ESS, EBA2, Bluetooth hands-free, RIO Box, MAN Tronic, MAN Media Truck 7 color display with navigation, LGS IV, Twin Engine 1-0905, 9m³ hopper, 2,660-liter water tank including filling system, 350mm debris chute, supply broom, sweeping unit with integrated conveyor roller, LED work lights, coarse dirt intake, flap valve via inlet pipe, rear suction option with 340 liters, additional 1,500-liter water tank, Rotorclean, total water volume 3,820 liters, adjustable speed for supply brush, dual sweeping unit, 600mm suction nozzle, laterally shiftable sweeping unit (400mm), high-pressure system: 280 bar at 74 liters water per minute, high-pressure unit behind suction nozzle and supply broom, front disc brush, manual suction hose. Psdjyxznajpfx Akiorc

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 02/2024, German registration and from first owner Mileage only 32,771 km V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover Pjdpoz Am Evofx Akierc Rinsing line 4 inches through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotating outlet at the rear in 6", with emptying device 8" suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO Trailer-EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle: LIFT AXLE Tires: 6x 385 /65 R 22.5 RENTING is the new BUYING; with us, full-service rental is available IMMEDIATELY.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, next inspection (TÜV): 10/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) Predpfjk E Tdasx Akiec 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. The images are archive images. The vehicle may be in use!

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. Rotary Motor / NEW / In Stock & Immediately Available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg Prodpsyltv Ijfx Akioc - Ideal machine for mulching in hard-to-reach locations such as roadside verges, riverbanks, steep slopes, or for clearing around gas and electricity lines - Mulches brush and wood up to 30 cm diameter - For excavators from 13 to 30 t - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor, depending on the carrier’s oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST Axial Piston Motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. An additional hydraulic circuit is needed for the hood. The machine is supplied without hoses or fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all available for immediate delivery! Please contact us for more information. We are happy to provide you with a financing offer upon request. We are the official sales and service partner for Seppi M. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for DMS. We are the official sales and service partner for Westtech. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. We are the official sales and service partner for Holp. We are the official sales and service partner for OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range for you! Errors and prior sale reserved! = Further Information = Please contact Marius Herden for more details.

Condition: new, For inquiries regarding this attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Overall width: 1.53 m Depth: 1.05 m Pjdsyltwfopfx Akierc Height: 0.72 m Weight: 667 kg - Mulching attachment for excavators, suitable for mulching alongside riverbanks, in forests, along railway tracks, and in other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10 to 20 tons - Suitable for mounting to various mounting plates - Drive designed for hydraulic motor depending on the carrier's oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front and rear chain protection - Height-adjustable skid plates reinforced with carbide plates - Color: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, part number 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min Intermediary adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: pressure, return, and drain. For the hydraulic hood, an additional double-acting hydraulic connection is necessary. The unit is supplied without hoses, fittings, and mounting plate. We have a very large range of different Seppi M. products in stock and immediately available! Mr. Herden (phone) will be happy to support you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. Pjdpfe Aa Aufex Akijrc - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone at ...). Prjdsyl Hggjpfx Akijc Seppi M. MIDI-KASTOR / 5–15 t / Stump Grinder / NEW / In stock & available immediately Price: €15,290.00 net / €18,195.10 gross - Cutter disc width: 0.10 m - Cutter disc diameter: 0.60 m - Total width: 0.80 m - Depth: 1.10 m - Height: 1.15 m - Weight: 450 kg - Stump grinder for excavator mounting - For the removal of stumps and tree roots - Grinds stumps and roots up to 30 cm deep - Suitable for excavators from 5 to 15 t - For mounting on various adapter plates - Drive designed for hydraulic motor, dependent on carrier machine flow rate - Indirect V-belt drive with 5 V-belts - Double chain protection - Rotor equipped with 32 fixed carbide-tipped tools - Colour: Red RAL3020 · Anthracite RAL7021 OPT 073 PISTON MOTOR Axial piston hydraulic motor F12-60 cm³ with pressure relief valve - Displacement in cm³: 60 - Required hydraulic pressure in bar (min–max): 200 – 350 - Required hydraulic flow rate in l/min (min–max): 70 – 100 Optional: MS08 adapter plate incl. bolts and installation = €750.00 net For operation, an independent hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drain. The device is supplied without hoses, connectors, or adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. Our warehouse carries a wide range of Seppi M. products, all available for immediate delivery! Please contact us at ... for more information. We are also happy to prepare a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.