Used Horizontal Drill for sale (10,482)

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Godpjxm Sxvefx Acmjkd Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: used, Model: SH75 Serial No: 7076 Capacities: Rotary Table Size: 1000 x 1000mm Maximum Table Load: 2000kg Vertical Traverse: 1000mm Cross Traverse: 1245mm Longitudinal Traverse: 1000mm Spindle Diameter: 75mm Spindle Traverse: 508mm Spindle Speeds: 5.6- 1120 rpm Spindle Taper: 40 int Facing Head Diameter: 508mm Facing Slide Traverse: 180mm Facing Head Speeds: 5.6 – 280rpm Feeds, X, Y & Z: 0.75 – 2500mm/min Feeds, Spindle & Face: 0.25 – 830mm Godpfx Acozrm T Eemekd Screw Cutting to Table: 2 – 10mm Pitch, 4 – 16 TPI Motor: 7.5kw Electrics: 415v, 3ph, 50 Cycles Complete with: Screw Cutting, 3 Axis DRO, Steel Telescopic Guards, Operator Safety Guard, Pendent Control, Power Draw Bar, Safety Brake, Facing Head Lock, Spindle Support Bearing, Facing Slide Tool Holder Selection of Spindle Tool Holders, Lovo Light Approximate Dimensions: 4200 x 2940 x 2950mm Approximate Weight: 10,500kg

Condition: used, TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2011, compressor operating hours: 5,308 h, diesel engine operating hours: 8,002 h, 5x drilling rods, drilling head, dust collector, immediately ready for use, in good condition, German machine. Upon request, we will provide a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! = Further information = Year of manufacture: 2011 Intended use: Construction Godpszm Eq Ejfx Acmekd Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2020, operating hours: 13,674 h, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 640 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 4,211 h, spindle nose: SK 50, Horizontal Machining Center Manufacturer: HURCO Model: HMX 500 Ti Year of manufacture: 2020 Control system: Ultimax Technical specifications: - X-travel: 810 mm Gkodpfxezbmzve Acmsd - Y-travel: 610 mm - Z-travel: 640 mm - B-axis: 360° - Spindle speed: 8,000 rpm - Drive power: 56 kW - Tool holder: SK 50 - Rapid traverse: 45/40/45 m/min - Power-on hours: approx. 13,674 h - Spindle hours: approx. 4,211 h Equipment & accessories: - Internal Coolant Supply (ICS) 40 bar - 2-station pallet changer (500 mm x 500 mm) with tombstone and zero-point clamping system (Quant) In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Gsdpfx Ajzgvmqscmjkd Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Gkedszza Nxopfx Acmod Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC Horizontal Machining Center with Pallet Changer DECKEL MAHO DMC 55 H duoBLOCK Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC Horizontal Machining Center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 44,000 hours Travel distances X-axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B-axis: 360° NC rotary table Rapid traverse rate X/Y/Z: 40 m/min Positioning accuracy according to the manufacturer: ± 0.003 mm Repeatability according to the manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool interface: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to the manufacturer) Spindle torque: 110 Nm (standard version according to the manufacturer) Tool changer Tool magazine: 40 tool positions Tool interface: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Internal cooling system (IKZ) Chip conveyor Measuring probe Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum circuit breaker rating: approx. 100 A Dimensions and weight Godpfxe Agn Sco Acmokd Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, MORI SEIKI NHX 4000 CNC Horizontal Machining Center with Pallet Changer General Machine Data Manufacturer: MORI SEIKI Model: NHX 4000 Year of Construction: 2012 Control System: Siemens Sinumerik 840D solutionline with SLIMline operator panel Machine Type: CNC Horizontal Machining Center Number of Axes: 4 (X, Y, Z, B) Travel and Feed Rates X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm B-axis: 360° NC rotary table Rapid Traverse X/Y/Z: 60 m/min Maximum Feed Rate: 60,000 mm/min Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Interface: HSK-A63 Spindle Power: Dependent on the installed spindle version Internal Coolant Supply (ICS) through the Spindle Tool Changer Automatic Tool Changer Tool Interface: HSK-A63 Tool Magazine: 40 positions Maximum Tool Diameter: approx. 70 mm Maximum Tool Diameter with Free Adjacent Positions: approx. 170 mm Maximum Tool Length: approx. 450 mm Maximum Tool Weight: approx. 8 kg Work Table and Pallet Changer Automatic 2-position Pallet Changer Pallet Size: 400 × 400 mm Maximum Pallet Load: approx. 400 kg Maximum Workpiece Diameter: approx. 630 mm Maximum Workpiece Height: approx. 880 mm B-axis: 360° Equipment Siemens Sinumerik 840D solutionline SLIMline operator panel HSK-A63 main spindle with 12,000 rpm Automatic Tool Changer Automatic 2-position Pallet Changer NC rotary table / B-axis Internal Coolant Supply (ICS) Chip Conveyor Coolant System Gksdpfx Aco Agn Tljmod Machine Dimensions and Weight Length: approx. 4,214 mm Width: approx. 2,720 mm Height: approx. 2,512 mm Machine Weight: approx. 8,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Spindle hours: 39,000

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC horizontal machining center with pallet changer DECKEL MAHO DMC 55 H duoBLOCK Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC horizontal machining center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 46,000 h Travel distances X-axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B-axis: 360° NC rotary table Rapid traverse X/Y/Z: 40 m/min Positioning accuracy according to manufacturer: ± 0.003 mm Repeatability accuracy according to manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool holder: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to manufacturer) Spindle torque: 110 Nm (standard version according to manufacturer) Tool changer Tool magazine: 40 tool positions Tool holder: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Internal cooling (IKZ) Chip conveyor Measuring probe Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum fuse rating: approx. 100 A Dimensions and weight Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg Gkjdpfx Acj Agn H Uemsd The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Condition: new, 18 mm M 12 M 14 MK 2 225-4.300 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm Gjdpfx Aozz Aihscmekd feed von Hand Handkurbel total power requirement 0,37/0,55 kW Machine height 840 mm

Condition: used, Technical details: Gkodsw Th Nlspfx Acmsd number of spindles: 1000 bore capacity in steel (diameter): 32 mm bore stroke: 200 mm range of revolution per miute: 63 - 1000 U/min bore capacity in cast iron: 50 mm drill spindle - Morse Taper: MK4 spindle throat: 315 mm spindle distance: 475 mm number of drilling stations: 3 headstock adjustment: 280 mm feed:: 0,08 - 1,25 (9 Steps) mm/U distance between table/spindle: 710 mm table surface area: 450 x 560 mm total power requirement: 12,4 kW weight of the machine ca.: 3,1 t dimension machine xH: 2,15 x 1,40 x 2,65 m The previous owner removed a drill spindle with box from the gang drilling machine! *

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Gkedpfezgaiiox Acmsd Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm Gkedpfxju Id Awj Acmed total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system *

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: Gedsu Id H Aspfx Acmjkd The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: Gkjdpfju Nfrpox Acmed - div. limit stops, tools, try square and marking gauges i.D. *

Condition: excellent (used), Lot of HSS Twist Drills; Design: HSS; tip drill – steel drill; 118° point angle, drilling depth. Morse taper shank, depending on diameter: MT2, MT3, MT4. Spiral angle 30°. Diameters: see "Pictures" / table. "Dimensions ø" / "Flute length mm" / Total length MT2 ø21.0 120/220mm ___G10 01 → € MT2 ø22.0 90/170mm ___G15 02 → € MT2 ø22.5 150/250mm ___G10 03 → € MT3 ø26.5 150/275mm ___G15 04 → € MT3 ø28.0 150/275mm ___G15 05 → € MT3 ø31.0 150/275mm ___G15 06 → € MT4 ø34.0 150/300mm ___G15 07 → € MT4 ø36.0 160/310mm ___G15 08 → € MT4 ø39.0 130/270mm ___G15 09 → € The G10–G15 numbers are internal references. Package price: on request More twist drills will be available soon in my other listings! You will receive an invoice, listed price = Net price incl. 19% VAT. Packaging & shipping within Germany €11.00 International shipping on request. Godpey An Izefx Acmekd If you have any questions, feel free to contact me: 0171/8082406 The original pictures are part of the item description. Please also check my other offers. Collection, shipping, bank transfer and PayPal possible.

Condition: used, Year of construction: 2003, x-travel 1250 mm Gjdpez D Iu Eofx Acmekd y-travel 500 mm z-travel 500 mm Control Heidenhain tnc 124 serial number 5277 table size 1800 - 360 mm taper ISO 50 weight of the machine ca. 3 t

Condition: used, Year of construction: 1990, functionality: fully functional, 260 mm Rund documentation vorhanden Gkodpfxjz D Iu Sj Acmod automatic feeds ja ja weight of the machine ca. 2,2 t dimensions of the machine ca. 1,7 x 2 x 2 m

Condition: used, Kolb radial drilling machine ready for loading onto a truck Gkedpfxjz Eanao Acmjd Technical specifications will be available shortly.

Condition: used, functionality: fully functional, Bench drill press Manufacturer: IXION, Type: BT 13 Technical specifications: Manufacturer: IXION Gkodpfx Acoz R Twusmjd Type: BT 13 Year of manufacture: Speed: 480 – 850 – 1400 – 2300 - 4000 rpm Drilling capacity: max. 13 mm in steel Table size (lower): 230 x 170 mm Table can be swivelled: 230 x 170 mm Drilling depth: 70 mm Tool holder: B 16 or MK 2 Overhang: 180 mm T-slots: 10 mm Power: 1.5 kW Weight: 65 kg Dimensions: L 0.4 x W 0.5 x H 0.855 m All specifications are subject to change without notice. A live demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1997, Well-maintained, used column drill from Alzmetall. Model: Alzstar 40 Gsdpfxez H T Eus Acmokd Capacity: 40mm.

Condition: good (used), Used pillar drill press from IMA Type IG 30-8 Gjdpfxjz H U Tye Acmskd Capacity 30 mm

Condition: used, Year of construction: 2007, x-travel 560 mm y-travel 560 mm Gkodpjwbi Adofx Acmjd z-travel 630 mm Control MSX 701 III MAPPS Max. rpm 14.000 min/-1 power capacity - main spindel 18,5 / 11 kW max. Torque 120 Nm tool taper MAS BT 40 distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 100 - 730 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm max. workpiece height 900 mm change time of pallets 6,0 sec b - axis 0,001 ° number of toolpositions 60 pos. tool taper MAS BT 40 max. tool diameter 70 / (140) mm max. tool length 400 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 50 m/min feed speeds 0 - 50.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 35 kVA weight of the machine ca. 9,8 t dimensions of the machine ca. 5,5 x 3,5 x 2,8 m CNC - Machiningcenter Horizontal MORI SEIKI - NH 4000 DCG - pallet-changer - Control options Program restart, cylindrical and spiral interpolation High-speed milling cycles, island and pocket milling cycles

Condition: new, Year of construction: 2024, ALZMETALL pillar drilling machine AB 34 iTRONIC, drilling capacity in steel 34mm, spindle speeds: 100-1800 rpm, short spindle MK4, spindle stroke: 160mm, overhang: 300mm, column diameter: 145mm, machine table usable support area: 615x430mm, with T-slots 2 x 14mm x 224mm, spindle-table distance min./max. 138/688mm, machine table height adjustment via hand crank, feeds 0.1-0.2-0.3-0.4 mm/rev, machine height without options: 1865mm, net weight: 470 kg. Standard equipment: Gkodpfx Asiqyixjcmed 7" TFT-LCD display with touch function Threading device Infinitely adjustable speed Spindle guard Three separate buttons for right-hand rotation – left-hand rotation – stop Mushroom button Main switch Right and left rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Electromagnetic feed overload protection Initial filling of machine oil Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine lamp, item no. 12 Coolant system A, item no. 24 Foot switch for threading, item no. 20.5 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected by appointment.

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts Gkodpfxju Idhys Acmsd drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *