Used Hole Number for sale (31,116)

Condition: ready for operation (used), Fanuc A06B-0123-B677#7000 AC servo motor, serial number as shown in the photo, mounting hole spacing: 102 x 102 mm, drive shaft diameter: 19 mm, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Hjdpoi D Hwkefx Abkefn

Condition: used, machine/vehicle number: 91671431, Year of construction: 2022, operating hours: 423 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Traction force: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 375 Ah Battery type: 3 PzS Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 2,200 mm Own weight: 1,500 kg Service valid until: 09/2027 UVV (accident prevention regulations) valid until: 09/2027 Operating hours: 423 h EQUIPMENT Cabin Windshield wiper White, non-marking tires Road approval lighting with turn signals, compliant with StVZO (German Road Traffic Licensing Regulations) Safety light at the front formerly a Jungheinrich full-service unit Hfsdpfx Ajz S Nvzebken All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 388

Condition: used, Year of construction: 2022, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Load capacity forklift: 3,000–5,000 kg Fork length: 1,350–2,350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 1,000 x 1,000 mm Self-weight: 200 kg Hsdez S Nwlepfx Abkjfn All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1081

Condition: good (used), Aluminum measuring table with a 50 mm aluminum plate and drawer cabinet Type: Measuring table with aluminum measuring plate Dimensions: Width: 80 cm Depth: 75 cm Height: 95 cm (97.26 cm high with frame) Aluminum plate: 5 cm thick, with threaded holes Hfjdpohvmkiefx Abkon Manufacturer of drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: Aluminum Condition: used Complete factory liquidation, large selection of storage platforms, pallet racking, shelving systems, and paternosters. High-quality industrial machines, lathes, grinding machines, and hand tools. More new and used items can be found in our shop! International shipping costs available upon request!

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm thickness 3 mm Hodpfx Abjmxi T Aoksfn Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm HSS unused ,from magazine liquidation bearing number 28418

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) Hjdpfxox H T H Re Abksfn - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Operating hours: 9,926 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: H25D-02 EVO Year of manufacture: 2015 Operating hours: 9,926 h Drive type: Diesel Lifting equipment Mast type: Triplex mast Full free lift: available Lifting height: 4,723 mm Fork length: 1,200 mm Load capacity: 2,500 kg Side shifter: available 3rd hydraulic valve: available MACHINE DETAILS Dimensions and weight Length: 3,800 mm Width: 1,200 mm Height: 2,154 mm Own weight: 3,770 kg Maintenance and inspection Next service due in: 734 h UVV (German Industrial Safety Regulation) valid until: Hjdpfez R Duiox Abksfn EQUIPMENT Semi-cabin Windshield wiper LED work light (front) Blue Safety Light (rear) Comfort seat with lumbar support Seat heating Side shifter 3rd hydraulic valve Triplex mast with full free lift All dimensions are rounded figures. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 91

Condition: used, machine/vehicle number: H2X351N03744/30, Year of construction: 2002, operating hours: 15,752 h, load capacity: 3,000 kg, lifting height: 5,900 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The engine was overhauled in 2024! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 5,900 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,300 x 2,650 mm Own weight: 5,100 kg UVV valid until: 10/2026 Drive type: LPG Engine manufacturer: Perkins Engine overhaul: 2024 Operating hours: 15,752 h EQUIPMENT Former Linde full-service unit Load protection grille Full cabin Heater White, non-marking tires Windshield wiper LED work light (front) Hfodpfx Abez Nvqmjken LED work light (rear) Comfort seat with lumbar support LPG gas cylinder with changeover valve Full free lift Hydraulic fork positioner Side shifter 3rd and 4th valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 113

Condition: used, machine/vehicle number: H2X386D07660, Year of construction: 2013, operating hours: 16,214 h, load capacity: 2,000 kg, lifting height: 3,400 mm, mast type: duplex, fork length: 1,600 mm, empty load weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,400 mm Load capacity: 2,000 kg Fork length: 1,600 mm MACHINE DETAILS Mast design: Duplex mast with full free lift Drive type: Electric Battery year of manufacture: 2021 Battery voltage: 48 V Battery capacity: 750 Ah resting voltage Battery: 50.1 V Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,150 x 2,250 mm Own weight: 3,500 kg Service valid until: 07/2027 UVV (Occupational Safety) certificate valid until: 07/2027 Operating hours: 16,214 h EQUIPMENT Formerly a Linde full-service unit Duplex mast with full free lift Fork positioner with side shifter Windshield with windshield wiper Roof panel Lateral fall protection, easily removable LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the rear Comfort seat with lumbar support and seat heating Free lift Hydraulically adjustable forks 3rd and 4th valve Hodpoz Nvtnsfx Abkjfn All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by e-mail. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 120

Condition: used, machine/vehicle number: H2X386V04688, Year of construction: 2019, operating hours: 21,389 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! Hfsdpfx Abez Nwknjkjn TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment range: 350–1,050 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Battery: 48 V, 625 Ah, 5 PzS Battery year of manufacture: 23.06.2023 Battery voltage at rest: 51.1 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 21,389 h EQUIPMENT Former Linde full-service unit Fork positioner with side shifter Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Comfort seat with lumbar support and seat heating Facelift model with tilt angle indicator Hydraulics: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 164

Condition: used, machine/vehicle number: H2X386V04486, Year of construction: 2019, operating hours: 22,973 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! Hfjdpfx Abez Nwpwjksn TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment: 350–1,050 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery year of manufacture: 2023 Battery voltage in idle state: 50.3 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 Operating hours: 22,973 h EQUIPMENT Former Linde full-service unit Facelift model with tilt angle indicator Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Comfort seat with lumbar support Seat heating Hydraulics: 3rd and 4th valve Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. In case of non-compliance with the collection deadline, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 165

Condition: used, machine/vehicle number: H2X391X00341, Year of construction: 2020, operating hours: 15,584 h, load capacity: 2,000 kg, lifting height: 4,625 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,625 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast Lift type: Full free lift Drive type: Liquefied petroleum gas (LPG) Dimensions & Weight Dimensions (L x W x H): 3,600 x 1,150 x 2,121 mm Weight: 3,391 kg Hfedjz Nxg Depfx Abken UVV certificate valid until: 06/2027 Next service due in: 416 hours Operating hours: 15,584 hours EQUIPMENT Former Linde full-service unit Full cabin Heater Windshield wiper Tilt angle indicator Fork positioner Side shifter LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating LPG gas cylinder Hydraulically adjustable forks Side shifter Hydraulic valves: 3rd + 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 182

Condition: used, machine/vehicle number: H2X388V00629, Year of construction: 2019, operating hours: 18,779 h, load capacity: 4,500 kg, lifting height: 3,700 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 3,700 mm Fork length: 2,400 mm MACHINE DETAILS Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 2,800 mm Dead weight: 8,000 kg Hfsdpfez Nn Tyox Abkjn Battery: 80 V, 775 Ah Battery voltage in idle state: 83.1 V Service valid until: UVV valid until: 07/2027 Operating hours: 18,779 h EQUIPMENT Fork positioner with side shift Integrated scale Facelift model with tilt angle indicator Windshield with windshield wiper Roof panel Lateral fall protection White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support and seat heating Hydraulic valves: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible at a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 74

Condition: used, machine/vehicle number: 516305X00392, Year of construction: 2020, operating hours: 9,411 h, load capacity: 3,000 kg, lifting height: 4,150 mm, mast type: duplex, fork length: 2,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,150 mm Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex mast Free-lift mast: Without center hydraulic cylinder Drive type: Electric Battery voltage: 80 V Hfsdpfoz Nv A Aox Abkjn Battery capacity: 620 Ah Battery voltage in idle state: 87.5 V Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Dead weight: 5,100 kg Service valid until: 04/2027 UVV certificate valid until: 04/2027 Operating hours: 9,411 h EQUIPMENT Fork positioner with side shifter Semi-cab with windshield wiper Lateral fall protection, detachable LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Previously a Still full-service unit 3rd and 4th valve Fork adjustment: Hydraulically adjustable Side shifter All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible for a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receiving confirmation of payment by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 122

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. Hedpfx Aoff Hdpsbksfn The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with stepless speed control and digital speed display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed display Precise machining Sturdy, ribbed prism bed made of cast steel, inductively hardened and precision-ground Hardened and ground bed guide rails Hardened spindle nose (DIN 6350) Guaranteed spindle nose runout accuracy better than 0.009 mm Automatic longitudinal/lead screw drive With longitudinal, cross, and compound slide Right/left rotation selectable on the control panel Emergency stop switch Chuck guard Thrust bearing Lead screw mounted in two sintered bearings Large threading range through change gear set Simple and quick speed change via V-belt Change gear drive EMC filter class B (for use in private households) Equipment details: Digital speed display Easily readable digital speed display Chip guard on the compound slide Four-position tool holder rotatable Roll-formed trapezoidal thread Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scale 0.02 mm Main spindle Hardened and mounted in adjustable precision tapered roller bearings Tapered roller bearings in P5 quality Cylindrical centering socket Hardened spindle nose with Ø 21 mm spindle bore Chuck Runout accuracy better than 0.04 mm Scope of supply: Three-jaw chuck Ø 100 mm, center-mount Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-position tool holder Change gear set Operating tool Model OPTIturn TU 2004V Article no. 3420310 Technical data Electrical connection 230 V / 1 phase ~50 Hz Power of spindle drive motor 600 W Spindle taper MK 3 Spindle bore 21 mm Through-hole three-jaw chuck 20 mm Tool holder mounting height max. 12 mm Center height 100 mm Distance between centers 300 mm Turning diameter max. 200 mm Turning diameter over cross slide 110 mm Bed width 100 mm Spindle speed 150 - 2,500 min-1 Number of speeds 2 speeds, speed electrically adjustable Travel of compound slide 55 mm Travel of cross slide 75 mm Longitudinal feed in range 0.1 / 0.2 mm/rev Pitch - Metric in range 0.25 - 3 mm/rev (14) Pitch - Inch in range 44 - 8 TPI (12) Tailstock mounting MK 2 Hodpfecnxrcox Abkofn Tailstock - quill stroke 65 mm Dimensions (L x W x H) 830 x 425 x 360 mm Net weight 61 kg

Condition: new, Bauer DK66 SZ3-2211/163 L gearbox motor, M 16435551-01, serial number as shown in the photo. Mounting hole spacing: 91 x 91 mm, drive shaft diameter: 25 mm. Unused, with signs of storage. 100% functional. Scope of delivery as shown in the photos. Hfsdoi D E Dcspfx Abkon

Condition: new, Lechmotoren GIE4.160L-DF engine, serial number as shown in the photo, hole spacing of mounting holes: 220 x 255 mm, drive shaft diameter: 42 mm, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Hsdpfei D I Eusx Abkefn

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005, serial number: 68351, permanent magnet AC servo motor, mounting hole spacing: 152x152 mm, drive shaft diameter: 32 mm, used, shows normal signs of wear, 100% functional. Please request shipping costs separately! Hfjdpfei D Ii Dox Abken

Condition: used, machine/vehicle number: H2X386V12010, Year of construction: 2019, operating hours: 14,594 h, load capacity: 1,600 kg, lifting height: 3,145 mm, mast type: duplex, overall weight: 3,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,145 mm Load capacity: 1,600 kg MACHINE DETAILS Mast design: Duplex mast with full free lift Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Battery idle voltage: 51.13 V Service valid until: 10/2027 UVV (Occupational Safety) valid until: 10/2027 Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,200 kg Operating hours: 14,594 h EQUIPMENT Former Linde full-service unit EVO facelift model Color display Tilt angle display Side shifter Semi-cab Windshield with windshield wiper Roof window LED work light, front LED work light, rear Comfort seat with lumbar support Seat heating High-quality charger, year of manufacture 2026 Additional hydraulics: 3rd valve Hodpfx Aez S Ntajbkefn Additional hydraulics: 4th additional valve for fork positioner All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 188

Condition: used, machine/vehicle number: H2X388V00602, Year of construction: 2019, operating hours: 15,156 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,700 mm Load capacity: 4,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 2,560 mm Own weight: 8,000 kg Battery date: 02/11/2022 Battery voltage: 80 V Battery capacity: 775 Ah Resting voltage: 81.1 V Service valid until: 08/2027 UVV (Occupational Safety) certificate valid until: 08/2027 Operating hours: 15,156 h EQUIPMENT Formerly a Linde full-service unit 3rd and 4th hydraulic valve Hydraulic fork positioner with side shifter Integrated scale Display of the tilting angle Windshield with windshield wiper Roof window Lateral fall protection White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Safety Light (front) Safety Light (rear) Comfort seat with lumbar support and seat heating All dimensions are rounded values. No warranty is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Hedpfxez S Nnwo Abkofn If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 43

Condition: used, machine/vehicle number: FN668522, Year of construction: 2022, operating hours: 2,910 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,500 mm Fork length: 2,200 mm Fork positioner range: 550–1,850 mm MACHINE DETAILS Mast type: Free-lift mast without a central hydraulic cylinder Battery year of manufacture: 10/2022 Battery voltage: 80 V Battery capacity: 775 Ah Battery idle voltage: 84.3 V Service valid until: 07/2027 UVV certificate valid until: 07/2027 Dimensions & Weight Dimensions (L x W x H): 4,700 x 1,300 x 2,400 mm Own weight: 5,500 kg Operating hours: 2,910 h EQUIPMENT Hfodpoz S Npbsfx Abkon 3rd + 4th valve Formerly a Jungheinrich full-service unit Fork positioner with side shift Full cab Heater Windshield wiper LED work light, front LED work light, rear Road traffic lighting with turn signals for road approval Orange warning light Comfort seat with lumbar support All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving confirmation of payment by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 97

Condition: used, machine/vehicle number: W41190V00204, Year of construction: 2019, operating hours: 2,919 h, load capacity: 5,000 kg, overall weight: 1,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated pulling force: 5,000 kg MACHINE DETAILS Battery voltage: 24 V Battery capacity: 500 Ah Battery year of manufacture: 2019 Battery voltage in idle state: 25.0 V Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,400 mm Dead weight: 1,000 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 2,919 h EQUIPMENT Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Hfjdpfx Ajz S Nudobkjn Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 372

Condition: used, machine/vehicle number: FN597668, Year of construction: 2019, operating hours: 6,532 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,000 mm Fork length: 1,200 mm Fork spreader: 550–1,720 mm MACHINE DETAILS Mast: Free-lift mast without a central hydraulic cylinder Machine type: Electric forklift Year of battery manufacture: 2017 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 84.1 V Dimensions & Weight Dimensions: 3,900 × 1,250 × 2,620 mm Own weight: 5,200 kg Service valid until: 07/2027 Hodpfx Abez S Nqfskjfn UVV certification valid until: 07/2027 Operating hours: 6,532 h EQUIPMENT Former Jungheinrich full-service unit 3rd and 4th valve Free-lift mast Fork spreader with side shifter Full cabin Heater Windshield wiper LED work light (front) Comfort seat All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 140

Condition: used, machine/vehicle number: 91671501, Year of construction: 2023, operating hours: 2,803 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Own weight: 1,500 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 2,803 h EQUIPMENT Battery charger Road traffic regulations (StVZO) lighting Direction indicator Road approval Formerly a Jungheinrich full-service unit All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Hsdpfxjz S Nu De Abkjfn Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 373