Used High-Speed Cutters for sale (46,766)

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW Prodpfovylh Ujx Aa Ejf tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: new, Year of construction: 2025, pressure 315 t distance between columns 2800 mm stroke fix 35 mm no. of strokes 100 - 250 Hub/min dayligth (stroke and adjustment up) 560 mm column travel -side 600 mm table surface area 2700 x 1200 mm hole in the table 2450 x 450 mm ram surface 2700 x 800 mm Weight 80,0 t dimensions of the machine (WxDxH) 5,1 x 2,65 x 5,25 m Podpfxexcp Ito Aa Esrf

Condition: refurbished (used), Year of construction: 2026, pressing force: 60 t, Machine for order High speed press BSTA 60 Retrofit and general overhaul Conversion to electronic drive und new Unidor PC-control system. Tool area enlargement possible. Please contact us for detailed offers. Pjdpfsxb D Daex Aa Ejrf

Condition: good (used), Spindle mount BT 50 Collet chuck holder DIN 6388, diameter 2 - 16 mm Gear ratio 1:6 Max. speed 15,000 rpm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Pedewz I Tbopfx Aa Eorf

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler Predpjnygvrefx Aa Esf (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm Prjdpfxeirax Ue Aa Eof -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Prodpfx Aaswz Nzmo Esf Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: new, Year of construction: 2025, pressure 315 t distance between columns 3800 mm stroke fix 35 mm Prodpoxcp Imjfx Aa Eof no. of strokes 100 - 250 Hub/min dayligth (stroke and adjustment up) 560 mm column travel -side 600 mm table surface area 3700 x 1200 mm hole in the table 3400 x 450 mm ram surface 3700 x 800 mm Weight 110,0 t dimensions of the machine (WxDxH) 6,1 x 2,65 x 5,6 m

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm Pjdpovygxnsfx Aa Esrf With 14 collets Clamping range 2 - 15 mm

Condition: used, - second hand - location: Bremen - Total width: 1.950 mm - Total depth: 1.050 mm - Total height: 1.400 mm Pedpelyqccjfx Aa Esrf - Hot mixer: approx. 10 liters - 5.5 kW - Cold mixer: approx. 25 liters - 2.2 kW - Hot mixer flange closure may be missing and would need to be replaced on site

Condition: excellent (used), Year of construction: 2010, KAWASAKI YF03N ULTRA-HIGH-SPEED DELTA ROBOT The Y series robots are parallel type pick & place robots offering quality and reliability. Brand Kawasaki Type YF03N Year of manufacture 2010 Serial number YF0030012 Predpfx Aajg T U Nbe Esf Electrical connection 400 V Overall dimension L 2400 mm Overall dimension W 2350 mm Overall dimension H 2750 mm Description of the Kawasaki YF03N robot Type Parallel kinematics Degree of freedom (axes) 4 Maximum payload (kg) 3 Positioning repeatability (mm) *1 ± 0.1 Movement range (mm) ø1,300 × H500 Weight (kg) 145 Angle repeatability (°) ± 0.1 Cycle time (payload) *2 0.27s (1 kg) 0.45s (3 kg) Other: 400 volt; camera; software; instructions; components; iron frame, with switch cabinet; 2x connection cable 5-pole; control panel E40E-A003 Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz -Type: 6ES5 385-8MB11 -Number: 2x Modul available -Price: per package -Dimensions: 100/45/H135 mm Pedpfxeh Db H Dj Aa Eerf -Weight: 0.2 kg/pc.

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Psdefxg T Uepfx Aa Ejrf Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: good (used), Year of construction: 2002, machine/vehicle number: 6428 104 014, Offer 25258 Technical data: - Cutting range at 90° round: 400 mm - Cutting range at 90° flat: W 400 x H 400 mm - Shortest cut-off length: 6 mm - Smallest diameter to be sawn: 10 mm - Minimum remnant length for single cut: 15 mm - Minimum remnant length in automatic mode: 80 mm - Material feed length, single stroke: 750 mm - Material feed length, multiple strokes: 20,000 mm - Saw band dimensions: 5700 x 41 x 1.3 mm - Cutting speed, stepless: 20 - 110 m/min Pedpoxc Hinefx Aa Ejrf - Hydraulic lifting/lowering of saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 8.0 kW - Bundle clamping device - Coolant system - Chip conveyor - Required space approx.: W 3000 x H 2200 x D 2300 mm - Weight approx.: 2,800 kg

Condition: used, Henninger high-speed milling spindle SK 40 Type 801 H580 Ratio: 1:6 Max. speed: 12,000 rpm Pjdpfx Ajvygzija Eorf Continuous speed: 10,000 rpm Temperature: approx. +60°C with tools over: ø 12 mm without collets

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, used HSC machine RXP800DS - overhauled - Workspace: - X axis: 200 mm - Y-axis: 294 mm - Z axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feeds 0 - 40,000 mm / min in all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1 chuck - Emusion cooling with Oil-mist-suction - RMS Main Job manager - Spindle max. 60,000 rpm HSK 25 - Tool changer: 24 chain changer, able to operate while machining - High precision option Pjdolzhhkepfx Aa Ejrf - Remote maintenance via Teamviewer - Transport dimensions machine: W 2,425 x L 1,925 x H 2,700 mm - Weight: approx.3,000 kg The machine is completely checked, measured and overhauled in-house. Please arrange a viewing appointment with us.

Condition: like new (used), CHARLES ROSS Mixer HSM-100LH2 high speed HSM-100LH-2 control mc series AC Tech with housing hydraulic control HIGHSHEAR MIXER Appliances have been excellently maintained. Some with replacement blades You are buying a device here View more product information here You can find more items - new and used - in our store! International shipping costs on request! Prsdpfxjwbtfpj Aa Ejf

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Prodpjrn Riqefx Aa Esf Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm Pjdpfx Ajf Axn Uja Eorf dead weight 6.5 kg good condition

Condition: good (used), Year of construction: 1984, machine/vehicle number: 332, Offer 24130 Technical data: Predpfx Aajtxzrwo Eof - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg Predpju At Thofx Aa Eof - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: good (used), Year of construction: 1994, machine/vehicle number: 133120, Offer 24506 Technical data: - Drilling capacity in solid steel ST 60 35 mm - Drilling capacity GG 25 42 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 36 - Drill spindle mount MK 4 - Quill stroke 170 mm - Drill spindle speeds stepless 20 - 3200 rpm - Drill feeds stepless 0.02 - 0.70 mm/rev - Drilling radius approx. min. / max. 490 / 1240 mm - Swivel angle 330° - Table size 1200 x 620 mm Pjdpfx Aswndydoa Eorf - Table height 900 mm - Motorized height adjustment / drill column stroke 450 mm - Hydraulic column + jib clamping - T-slots vertical on the left machine side - Coolant device - Drive 400 V / 5.0 kW - Space required approx. W 1500 x H 2600 x D 1700 - 2500 mm - Weight approx. 2100 kg

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 Psdpfx Aasu Et Nbs Ejrf - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), Year of construction: 1988, machine/vehicle number: 77796, Offer 25071 Prodpfx Aaowzu A Ao Esf Technical data: - Electro-hydraulic raising and lowering of the saw bow - Saw blade dimensions: 400 x 45 x 2.0 mm - Cutting range - 90° round: approx. 250 mm - flat: approx. 250 x 130 mm - square: approx. 220 x 220 mm - Max. vice opening width: 405 mm - Stroke and cutting speeds adjustable - Mitre-adjustable vice - Electric motor with coolant unit - Drive: 380 V / 2.0 kW - Required space: approx. W 550 x H 1270 x D 1700 mm - Weight: approx. 380 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2355-2, Offer 24416 Technical data: Prodpjufw S Refx Aa Eof - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2500 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine