Used Heating Installation for sale (20,378)

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Level indicator (without guarantee) Design: upright Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 820 mm Ijdpfx Aasx Dmbge Ejtr Total height: 2,350 mm Heating/Cooling: available Max. permissible operating overpressure: 6.0 bar Base type: feet Location: external storage Technical documents: drawing Cylinder tempering: Thermoplate Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Manhole / Dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL CHARACTERISTICS Exterior surface: marbled

Year of construction: 2022, condition: new, For sale is a hammer mill for the production of powdered goods in the spice / herb / food industry! Structure: 1 piece hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the rear wall 2 pieces flushing ports into the rotating part of the mill Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Inside the housing a sieve basket with crusher, from the outside the sieve can fix Bottom centered an outlet with appropriate connection flanges Motor 400/680 volts; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. sieve according to your choice 3 pcs. The rotor is also in V2A design, (beater with 96 platelets) Rotor can be turned 180°, in addition, the beater platelets can be turned 1 time. For this purpose, we recommend balancing after turning. 1 piece feeding screw for hammer mill with gear motor with 1,2 kW screw equipped with two cleaning balls at the hinged lid lid is equipped with lid switch and tumbler insertion hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for infinitely variable speed control speed display beater 3 PTC thermistor sensors as protection against overheating of the motor. Sensor for vibration protection Integration of cover switches Switch cabinet in stainless steel Emergency stop, main switch 1 piece Cooling or heating jacket on the rear wall of the mill housing Welded seams pickled and glass beads blasted on the outside. Steel parts, such as motor and motor console primed and painted according to RAL 1013. Attention: It must be ensured that no metal parts enter the mill! Total price of the plant described above price 145.000 € superstructure: 1 piece Hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the back wall 2 pieces of flushing connections into the rotating part of the mill. Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord In the inside of the housing a sieve basket with crusher, from the outside the sieve can be fixed At the bottom in the middle an outlet with a corresponding connection flange. Motor 400/680 Volt; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Itodpfx Ajpz H D Ija Esr Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. screens of your choice 3 pieces rotors The rotor is also in V2A design, (beater with 96 plates) rotor can be rotated by 180 the beater plates can be turned 1 time. be turned. For this purpose, we recommend balancing after turning. 1 piece Feeding screw for hammer mill with gear motor with 1,2 kW Screw equipped with two cleaning balls on hinged lid lid is equipped with lid switch and tumbler feeding hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for stepless speed control speed indicator beater

Condition: used, This listing is for the Velp Scientifica T Are F20520170 Heating Stirrer The unit is in full working condition and is ready for immediate use Isdpfexx Akmox Aa Ejtr Overview: Velp Scientific T.ARE The T.ARE is part of Velp Scientifica’s line of heating magnetic stirrers—lab devices combining a hotplate and a magnetic stirrer. These instruments are commonly used to heat and mix solutions efficiently and safely. Key Features & Specs for T.ARE According to available technical data: Power: Approximately 1300 W—making it one of the most powerful in the ARE series Voltage Options: Available in 115 V or 230 V, 50–60 Hz configurations Dimensions: About 190 × 110 × 245 mm and weighing roughly 3.1 kg While specific details on maximum temperature or stirring volume for T.ARE aren't listed, other Velp ARE models typically reach up to 370 °C, handle up to 15 L of water, and provide stirring speeds up to 1,500 rpm Given its higher wattage, the T.ARE likely offers performance on par with or exceeding those specs

Year of construction: 1991, condition: used, Technical details: max. temperature: 1200 Grad size of opening: 450 mm container volume: ca. 80 l working depth: Kammertiefe: 600 mm voltage: 380 V total power requirement: 46 kW weight of the machine ca.: 2,1 t dimensions L x W x H: 1,6 x 1,6 x 1,46 m dimensions electric cabinet: 400 x 600 x 760 mm Electric melting furnace, crucible furnace, tiltable pouring height= 1050mm pouring Ø 80mm lining=chamot Swing out via 2x hydraulic arm Hydraulics: Manufacturer Houch Hildesheim Optionally an additional crucible can be sold, please ask. Ijdpfou N Ak Nex Aa Eotr Size outside: Ø 1240mm x 1000mm Size inside: Ø 840 x 1000mm Volume of contents: approx. 260 liters Slag collection material: circulation Ø center = 940mm, size 50 x 50mm Material = steel is heat resistant *

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, power: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Isdex E Auzspfx Aa Estr Year of manufacture 2010 with feed with ash discharge with control

Condition: used, mileage: 60,000 km, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 4,700 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, navigation system, tail-lift, Transmission: 6 gears, Manual gearbox Year of manufacture: 2020 Suspension: leaf suspension Front axle: Steering Empty weight: 2.990 kg Carrying capacity: 1.510 kg GVW: 4.500 kg Tail lift: Zepro Radiografisch, tail lift, 750 kg Itodpfx Aaox Da E So Eor Sub Woofer

Condition: used, tank capacity: 2,300 l, GENERAL Design: upright Remarks: The height-adjustable ball screws are missing on 3 feet; 1 heating connection has been cut off Speed: 175 / 365 rpm Outer diameter: 1,500 mm Inner diameter: 1,440 mm Total height: 2,700 mm Heating/cooling: present Power: 0.2 / 0.92 kW Top: bolted lid with folding segment Agitator: propeller Mounting style: feet Location: Bremen Cylinder tempering: double jacket Volume: 2,300 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,450 mm TANK Number of feet: 4 pcs Ijdpfex Dma Nex Aa Eotr EQUIPMENT Note: Discharge connection cut off Discharge: 65 mm MATERIAL SPECIFICATION Jacket material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 380 Volt Agitator arrangement: eccentric in top head

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Itsdpfx Ajrz R Aroa Eer Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: used, This listing is for 1 of 3 Velp Scientific HSC Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The Velp Scientific HSC Heating Magnetic Stirrer is an analogue heating magnetic stirrer designed for basic heating and stirring applications in chemistry, biology, and pharmaceutical laboratories. It features a rugged design with a ceramic heating plate that resists acids, bases, and solvents, and a techno-polymer casing that resists chemicals, scratches, and surface abrasions. Key Specifications Maximum temperature: 400°C Stirring volume: up to 15 liters Stirring speed: up to 1300 RPM Heating control: Analog Iodpfjxx Ai Nex Aa Eetr Ceramic hot plate: Square-shaped and resistant to chemicals and scratches Power supply: 115V/60Hz Dimensions: 8x3.7x13.5 inches

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, overall weight: 14,000 kg, space requirement length: 8,000 mm, total width: 2,500 mm, Equipment: hot water, large custom-built wood heating boiler in a hooklift container, this mega boiler can be filled from the top using a loader or similar equipment, due to circumstances almost finished but never used Itodpfxox Au Apo Aa Eer

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Itsdpfodvltyox Aa Esr Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: good (used), Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Heat exchanger: without fan -Manufacturer: GEA Happel, air heater heat exchanger Itodpsxxic Nofx Aa Eer -Type: 4124/403/441 -Fan: not included -Operating pressure: max 13.7 bar -Dimensions: 890/460/H560 mm -Weight: 82 kg

Condition: excellent (used), Here we offer a Mytron drying oven. The drying oven WT 850 is used for simultaneous drying of several products or auxiliary devices in the semiconductor industry. Due to its robust construction (box section frame) and the use of stainless steel material for the heating chamber, the drying oven WT 850 is universally applicable. The trolley enables the WT 850 drying oven to be moved in and thus easily loaded. An exhaust air connection with control flap enables the connection of the oven to a central exhaust system. Technical data: Outer dimensions: Width 1145 mm x height 1880 mm x depth 1810 mm dimensions of the heating chamber: width 850 mm x height 690 mm x depth 1410 mm Volume of the warming chamber: approx. 830 liters mass: ca.230 kg, trolley 50 kg temperature range: 10°C above room temperature to + 120°C spatial temperature constancy: ± 1°C Ijdpfx Ajiwyiwea Estr temporal temperature constancy: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug power consumption: 4,5 kVA fuse protection: 3 x 16 AT, 1x 6 AT Control: digital controller Safety device: adjustable overtemperature protection Feed-through opening: Exhaust air spigot 100 mm with control damper on top Supply air spigot 100 mm with control damper on top Type: WT 850 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), DIOSNA P250 A Mixer / Granulator with Heating Jacket This mixing unit, with a capacity of 245 liters, is designed for intensive mixing and dispersing of powders or granulates. Additionally, free-flowing materials, including liquids, can be processed. The heating jacket is brought to the desired temperature using an external heating source. Manufacturer: DIOSNA Iedpfox Anufsx Aa Ejtr Year of manufacture: 1988 Space requirement: 250 x 130 x 260 cm

Condition: used, This listing is for a IKA RCT B S002 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT Basic Magnetic Stirrer is a highly versatile and reliable laboratory device, combining precision stirring with integrated heating capabilities. Designed for various lab applications, it ensures consistent performance, safety, and ease of use. Key Features: Wide Speed and Temperature Range: Powered by a strong motor, it supports a high range of stirring speeds and operates with adjustable heating plate temperatures between 50°C and 310°C. Integrated Temperature Control: Includes a PT 1000 temperature sensor for precise and real-time temperature monitoring, enabling efficient heating of the medium. Digital Display for Accuracy: Allows exact setting of temperature and speed, even when the unit is turned off, with a safety temperature limit displayed digitally. Hot Surface Warning: The Hot Top indicator alerts users when the heating plate remains hot, reducing the risk of burns. Automatic Safety Features: Switches off automatically if the connected external temperature sensor is not properly immersed, with timeout duration adjustable. Bushing for Contact Thermometer: Compatible with contact thermometers like ETS-D5, ensuring precise external temperature control for sensitive applications. Aluminum Heating Plate: Optimized for superior heat transfer and fast heating of samples. Enhanced Durability and Design: Itedpfx Asxxz Ukja Eor The enclosed assembly (IP 42) protects the unit against splashes and contaminants, extending its service life. Improved Magnetic Adhesion: Ensures stable stirring, even at higher speeds. Error Code Display: Provides digital error codes for straightforward troubleshooting.

Condition: good (used), functionality: fully functional, input voltage: 220 V, total width: 379 mm, total length: 450 mm, total height: 850 mm, Warming cabinet Temperature adjustable up to 90°C Stainless steel construction Iodpfjvdktqox Aa Eetr Dimensions: 379 x 450 x 850 mm (WxDxH) Connection: 220V Used device Delivery service Many more great bakery machines in stock!

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Itjdpfx Aasdwh E As Esr Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece Itjdpfju Tlhvex Aa Eer -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece

Condition: good (used), LAC Heating oven SV6000/25 Temperature range +20 to +250°C TESTO software Weight: 1750 kg 6000 liters Outer dimensions 2850×2000×3700 mm Isdpfx Ajuugaqja Eotr Test chamber dimensions 2000×1500×2000 mm Oven switch 100/3 Max. Floor load 2000 kg Circulation 3000 m3 /h Nominal power 66 kW Nominal current 98 A Voltage 3/N/PE 400/230V AC 50 Hz Weight 1750 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: used, This listing is for a IKA RCT CL S2 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT CL S2 Heating Magnetic Stirrer is a reliable laboratory device designed for efficient stirring and heating of various substances. Part of the IKA RCT series, it combines precision, safety, and durability to meet the demands of modern laboratories. Key Features: Precise Temperature Control: Offers a temperature setting range of 0 - 310°C with a resolution of 1 K, ensuring faster and accurate heating of the medium. Wide Speed Range: Adjustable speed from 50 to 1500 rpm, with a setting accuracy of 10 rpm, making it versatile for different stirring needs. Safety Features: Equipped with a hot top indicator, digital error code display, and an adjustable safety circuit for heating plate temperatures (50 - 360°C) to prevent overheating and ensure safe operation. Efficient Magnetic Stirring: Utilizes a strong motor, capable of stirring volumes up to 20 L (H₂O), suitable for large-scale or intensive laboratory tasks. Durable Heating Plate: Constructed from aluminum alloy, the heating plate delivers optimal and homogeneous heat transfer for consistent results. Advanced Connectivity: Includes USB and RS232 interfaces for easy control and documentation of test parameters using a PC, and compatibility with labworldsoft laboratory software. Technical Specifications: Dimensions: 160 x 85 x 270 mm (W x H x D) Weight: 7.29 pounds Wattage: 600 watts Material: Aluminum alloy Iedpfxsxxz Uds Aa Eotr Brand: IKA Manufacturer: IKA WORKS, INC

Year of construction: 2018, condition: excellent (used), EFD Type: MINAC 6/10 SM Heat treatment The compact design of the Minac induction heating system allows for easy installation and offers fast, concentrated and controlled heating with full repeatability. repeatability. Medium frequency product line Itedpfx Aajt Din As Esr Technical data: Maximum output power 10 kW Continuous output power 6 kW Mains voltage 400-480 V Frequency range 10-25 kHz Control range of output power 2-100% Recommended back-up fuse 16 A Cooling water approx. 4 l/min Cooling water flow temperature min./max. 18 - 35°C Cooling water pressure min./max. 4 - 6 bar Weight approx. 50 kg Dimensions (WxDxH): 345 x 708 x 453 mm Year of construction: 2018 optris CTlaser infrared thermometer Abbreviation: 3ML Measuring range: 50 to 400 °C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature control ECU 1214C Hyfra eChilly water cooler 4-S Cooling capacity 4395W The device comes from the laboratory sector. Only a few operating hours. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, This listing is for a IKA RCT RET B C Heating Magnetic Stirrer. Ijdpfx Aexxz T Tja Ejtr The unit is in full working condition and is ready for immediate release. The IKA RCT RET B C Heating Magnetic Stirrer is a reliable laboratory device designed for precise heating and stirring tasks. Combining a robust heating plate and magnetic stirrer, it ensures accurate temperature control and efficient sample processing. Key Features: Durable Heating Plate: Made of aluminium alloy, the plate ensures optimal and uniform heat transfer for consistent sample heating. Temperature Control: Offers a maximum temperature of 310°C with a temperature control mode for faster and precise medium heating. Versatile Magnetic Stirrer: Features a speed range of 50-1500 rpm, capable of handling up to 20 L stirring volume. Suitable for a wide range of laboratory applications. Safety Features: Includes a fixed safety circuit that shuts off the unit at 370°C and a hot surface warning to prevent accidental burns. Digital Display: Allows exact temperature and speed settings, even when the device is switched off, ensuring ease of use and precision. Advanced Connectivity: Equipped with USB and RS232 interfaces for remote control and documentation of test parameters via a PC. Compatible with labworldsoft laboratory software for enhanced functionality. Technical Specifications: Motor Rating Output: 9 W Heat Output: 600 W Temperature Range: Room temperature + device self-heating to 310°C Speed Range: 50-1500 rpm Stirring Bar Length: 20-80 mm Set-up Plate Material: Aluminium alloy Set-up Plate Dimensions: Ø 135 mm Dimensions: 160 x 85 x 270 mm Weight: 2.5 kg

Condition: excellent (used), GH Induction Type: 30 SMBC Itsdjb E I Utepfx Aa Eer Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, simple operation and high efficiency) in a series resonant circuit and a compact design, with cooling enclosed in the generator enclosure. Rittal generator cabinet and GH induction TC150 / 2 resonant circuit Voltage 400V Frequency 50 Hz Current 56 A Power 37.5 KVA as good as new condition! Scope of delivery: Transistor generator, Rittal generator cabinet with cooling and TC150 / 2 resonant circuit (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Heraeus / Thermo Type: UT 6200 Heraeus / Thermo heating and drying oven Process control up to 300°C External housing: Depth 715 mm, Width 895 mm, Height 816 mm Internal dimensions: Depth 503 mm, Width 554 mm, Height 644 mm External diameter: Inlet/outlet connection 40 D Internal volume: 180 liters Steam chamber: 240 liters 1/PE AC, 230 Volt, 50 Hz, 12.0 A, 2.65 kW Weight: 100 kg Type: UT 6200 Condition: used Iodpsw Euwzjfx Aa Eotr Scope of delivery: (see picture) (Subject to change and errors in the technical data!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Vötsch Type: VTL 60/60 The Vötsch VTL 60/60 is an industrial heating and drying cabinet, specifically designed for the safe drying of coated materials, such as paints and resins. It meets the safety requirements of EN 1539 and is therefore suitable for processes where flammable solvents may be released. Technical specifications: Usable volume: 0.216 m³ (600 × 600 × 600 mm) Nominal temperature: 250 °C Maximum heating surface temperature: over 750 °C Nominal power: 7.2 kW Connected load: 8 kW Minimum exhaust air flow rate: 102 m³/h Isdpfswgcxcsx Aa Ejtr External dimensions (L × W × H): 1150 × 1000 × 1700 mm Weight: approx. 250 kg Safety features: The VTL 60/60 is equipped with a powerful recirculation fan, which ensures even temperature distribution and effective dilution of solvent vapors. This prevents the formation of explosive atmospheres and ensures safe operation. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.