Used Heat Shrink Tunnel for sale (14,109)

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Nedpox R D Adsfx Acvswd Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar The machine is sold with a dual-position feed conveyor: Feeding system for shrink wrapper Accumulation conveyor feeder for manual packaging Various formats available Complete documentation

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Industrial steam boiler system (2 units) Manufacturer: Viessmann Nwjdpsyxtdtofx Acved Model: Vitomax 200 HS Year: 2005 Steam capacity: approx. 2,300 kg/h Operating pressure: 10 bar Burner: Manufacturer: Weishaupt Model: G8/1-D Power range: 400 – 2,275 kW Year: 2005 Used, in good working condition. Inspection possible upon request. - Boiler unit - Burner - Control panel - Accessories as shown in the pictures EUR 10,000 each Ex works (EXW), Belgium

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Nwsdpfxjyt Ihbs Acvsd System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: ready for operation (used), Year of construction: 2003, WVT Bioflamm heating system / wood chip heating system with discharge Rated output: 291 kW Year of manufacture: 2003 Fuel: Biomass Factory number: 1217 Water content: 1670 liters Nwjdpfx Aoywn Nnscvsd Including discharge auger, agitator, and rotary valve Discharge is suitable for a silo size of 5 - 6 m. The system is still installed and must be dismantled by the buyer. The system is being sold on behalf of the customer and is immediately available. Location: Postal code 54 Subject to prior sale If you have any questions, just write to me and I will provide you with the contact details of our customer.

Condition: used, suitable for nitrogen all stainless steel Nwsdpfsytn Rcex Acvjd belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Year of construction: 2010, condition: good (used), IWM SAN100 SP Sanitiser tunnel Njdpfx Ajvhcx Tocvswd 2010, stainless, aperture 600mm x 600mm, belt dimensions 1800mm x 600mm, with recirculation tank, filter, level sensor, 3Ph

Year of construction: 2009, condition: excellent (used), stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC Nwjdpfx Ajdwhf Njcvjd

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, Minipack Tunnel 70 The Minipack Tunnel 50 is a well-insulated and quiet two-chamber shrink tunnel designed for wider and taller products. Njdpfsyaqihex Acvowd – Shrink tunnel for various packaging requirements – Suitable for different types of shrink films – Power supply: 400 V, 50/60 Hz, 3-phase – Installed power: up to 14.5 kW – Max. product dimensions: 680 × 390 mm (variable length) – Tunnel entry: 690 × 390 mm (W x H) – Machine dimensions: 2770 × 1160 × 1640 mm (L x W x H) – Machine weight (net/gross): 415 / 483 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, The Minipack Tunnel 50 Twin is designed for high packaging speeds with small products. Its dual heating chamber with separate controls ensures consistent shrink performance. Like all Minipack shrink tunnels, it is well insulated, energy efficient, and operates quietly. Nwodpfx Acjyank Asvsd – Dual-chamber shrink tunnel – Independent control of heating chambers – High throughput and shrinking speed – Power supply: 400 V, 3-phase – Installed power: up to 15.0 kW – Maximum product dimensions: 400 × 190 mm (length variable) – Tunnel inlet: 450 × 210 mm – Machine dimensions: 2,130 × 800 × 1,460 mm – Machine weight (net/gross): 260 / 318 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, MINIPACK Tunnel 50 Nwjdpfx Ajx Ttc Sjcvjd The Minipack Tunnel 50 is a compact, well-insulated, and quiet shrink tunnel designed for diverse packaging requirements and a wide range of shrink films. A stainless steel version is available as an option. – Shrink tunnel for various packaging needs – Suitable for different types of shrink films – Optional stainless steel version available – Power supply: 200–400 V, 50/60 Hz, 3-phase – Installed power: up to 7.5 kW – Maximum product dimensions: 400 × 220 mm (length variable) – Tunnel entry dimensions: 450 × 240 mm – Machine dimensions: 1,770 × 840 × 1,465 mm – Machine weight (net/gross): 188 / 236 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, Minipack Tunnel 50 Twin GT The Minipack Tunnel 50 Twin GT is a two-chamber shrink tunnel with interface, designed as an add-on for automatic packaging machines of the Pratika line. A key advantage is that tunnel settings can be stored in the packaging machine’s program alongside machine parameters for each product, meaning you no longer need to manually change these settings when switching products. – Separate control of heating chambers – Temperature and fan speed regulation – Power supply: 400 V, 50/60 Hz, 3-phase – Installed power: 14.5 kW – Max. product dimensions: 400 × 135 mm (with glass) / 400 × 200 mm (with curtain) Nwedpoyanqcsfx Acvjd – Tunnel infeed: 450 × 215 mm – Machine dimensions: 2,172 × 912 × 1,463 mm – Machine weight (net/gross): 294 / 352 kg

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: Impaero, 3.1 General Description of the Basic Unit The Impaero is an air handling unit that refreshes indoor air and provides energy-efficient heating and/or cooling. The purpose of the Impaero is to create an optimal indoor climate in commercial spaces with minimal energy consumption. The Impaero is a modular system. Depending on customer requirements, various modules can be added to expand the functionality of the Impaero. Nwodpfx Aceyxbzmovsd

Condition: new, Year of construction: 2026, functionality: fully functional, power: 250 kW (339.91 HP), Warm air generator for wood pellets and/or wood chips, with power ratings from 250kW to 500kW. Suitable for heating industrial halls, buildings, warehouses, as well as for drying processes such as hay, grass and other crops. Burners are compatible with biomass wood chips and pellet granules. Warm air capacities from 200kW to 500kW. Available in 40FT or 60FT containers. Lanox BV The Netherlands. Nedjyaly Uspfx Acvowd

Condition: good (used), Heating fan, electric heater, heating, electric heater, electric heating fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi .: 21023007 Njdpjfixa Eefx Acvewd -Type: EFFK -Power: 30 kW -Voltage: 3 x 476 V -Dimensions: 460/350/H565 mm -Weight: 29 kg

Year of construction: 1986, condition: used, machine/vehicle number: 860918, cooling capacity: 11165 W/9600 kcal max. outside temperature: 32°C max. working pressure: 24 bar electrical connection: 380 V, 4,12 kW Nedjbac Tmopfx Acvewd place requirement: 860 x 760 x 1360 mm

Condition: used, machine/vehicle number: 003, Number of heating chambers: 5 Chamber size: 140 Ø x 150 mm high tested maximum temperature: 1000°C electrical connection: 400 V, 13 kW Njdpfjbn I Tzjx Acvowd space requirement: 550 x 1600 x 1830 mm Weight: 492 kg

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Nedpfx Acsyh I Unjvewd Weight: Estimated: Kg 690.0

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Weight: Actual: Kg550.0 Nwsdpsyh I Uhofx Acvjd Dimensions: 650 X 3000

Condition: like new (used), Year of construction: 2015, operating hours: 27,000 h, functionality: fully functional, Used Combined Heat and Power Unit (CHP) Manufacturer: 2G Energietechnik GmbH Model: G4076 Nwedpfsyxl Uqex Acvod Engine: MAN Gas Engine Electrical Power: approx. 400 kW Voltage: 400 VAC / 24 VDC Frequency: 50 Hz Year: 2015 Condition: Used, in working condition - Complete CHP unit - Control cabinet - Control system / HMI - Gas engine and generator - Delivery as inspected Price: EURO 125,000.-/EXW (Loaded) Location: Germany/Düsseldorf Delivery: EXW (Ex Works)

Condition: used, mileage: 585,000 km, power: 163 kW (221.62 HP), first registration: 02/2012, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro5, total width: 2,500 mm, total height: 3,950 mm, loading space length: 6,800 mm, loading space width: 2,400 mm, loading space height: 2,750 mm, Year of construction: 2012, Equipment: ABS, soot filter, Additional information: * Payload: 5221 kg * Type | First axle: Fulda * Tyre size | First axle: 245/70 R17.5 * Tread depth inner left | First axle: 20% * Tread depth inner right | First axle: 20% * Maximum axle load | First axle: 4480 kg * Type | Second axle: Fulda * Tyre size | Second axle: 245/70 R17.5 * Tread depth outer left | Second axle: 60% * Tread depth inner left | Second axle: 60% * Tread depth outer right | Second axle: 60% * Tread depth inner right | Second axle: 60% * Maximum axle load | Second axle: 5992 kg * Wheelbase: 465 cm * Axle position | First axle: Front * Axle brand | First axle: Other * Suspension | First axle: Parabolic springs * Axle position | Second axle: Rear * Axle brand | Second axle: Other * Price on request: Yes * Brake type | First axle: Disc brakes * Steering | First axle: Yes * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Twin tyres | Second axle: Yes * Driven axle | Second axle: Yes Additional equipment: * Anti-lock braking system (ABS) * Central locking * EBS (Electronic Braking System) * Electric windows * Fog lights * Heater * Homepage * Isofix child seat attachment * Parabolic suspension * Particulate filter * Radio/cassette player * Roof spoiler * SemCollection * Speed limiter * Spoiler * Sun visor Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures for your country Location | Maasdijk (NL) | 140 km from the German border | 20 km from Rotterdam The Hague Airport Disclaimer: Nodpfxsx A Rm Rs Acvowd Subject to changes, prior sale, and errors.

Condition: used, Model CES-LT-LIN-9x0.66-PODB-SH suitable for nitrogen all stainless steel belt width ± 660 mm nett belt length 9.000 mm total length ± 10.500 mm dimensions (l x w x h) : ± 10.500 x 1.431 x 2.230 mm 12 kW Nsdoypbg Nopfx Acvowd product height: max. ± 120 mm

Condition: used, Year of construction: 2018, functionality: unexamined, input voltage: 400 V, overall weight: 472 kg, input current: 19 A, conveyor belt width: 640 mm, input frequency: 50 Hz, temperature: 180 °C, Brand: Tesoma Model: Mini Standard Year of manufacture: 2018 Serial number: 21700647 Voltage: 400 V Frequency (Hz): 50 Nsdpfeytf Npsx Acvswd Amperage (A): 19 Dimensions LxWxH (mm): 2220 x 1120 x 1330 Weight (kg) approx.: 472 Stock quantity: 1 Manufactured in: Germany Comments: Max contributable solvent volume 0.30 kg/hr, max waste air volume flow 50 m³/hr, conveyor 2220 x 640 mm, 13 kW.

Condition: used, functionality: fully functional, El. heated chamber oven, make Heraeus Nwedpfsxlruzox Acvsd Type: BT 5042 Temperature: 250°C Clear dimensions (W x D x H): 390 x 285 x 350 mm

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm Njdpfxsyn Dc Re Acvowd

Condition: used, functionality: fully functional, El. heated chamber oven Nabertherm Type: N 500 / 45 HA Air flow: horizontal Nodoxmhhajpfx Acvewd Temperature: max. 450°C Connected load: 28 kW Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm