Used Heat Recovery for sale (13,922)

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total width: 440 mm, total length: 450 mm, total height: 850 mm, input frequency: 50 Hz, DGUV certified until: 04/2027, TOP warming cabinet Temperature adjustable up to 90°C Stainless steel construction Dimensions: 440 x 450 x 850 mm (W x D x H) Connection: 220V, 750 watts Kljdpfx Aaovdkuujljp Used unit, cleaned Many more bakery machines in stock!

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication Kedpfxjk S Dt To Aalolp - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Meurer heat shrink tunnel adjustable temp, variable speed, aperture 400mm x 350mm, mobile frame, Kledpfsdmn Umsx Aalsp

Condition: like new (used), Ilapak stainless flow wrapping and shrink tunnel line Carrera 2000 PC Ksdpfxod I Ncgs Aalolp stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Condition: excellent (used), mileage: 31,203 km, power: 185 kW (251.53 HP), first registration: 07/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 200 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 8, emission class: euro5, total length: 8,950 mm, total width: 2,450 mm, Year of construction: 2008, Equipment: ABS, EBS, USB port, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Rear work lights - Front work lights - Armrest Klsdpoyhxh Esfx Aaljp - AUX connection - Outside temperature display - Cup holder - Heated mirrors - Power brake booster - Sunroof - Differential lock - Differential lock - Tachometer - Electrically adjustable, heated mirrors - Height-adjustable driver's seat - Remote central locking - High beam - Front windscreen - Enclosed cab - Tinted glass - Hydraulic system - Height-adjustable steering wheel - Height-adjustable front seats - Cab - Folding exterior mirrors - Air conditioning - Load protection grille - LED lighting - Air-suspended seats - Air horns - Air suspension - Centre armrest - Particulate filter - PTO (Power Take-Off) - Radio/CD player - Spare wheel - Reversing camera - Disc brakes - Headlight levelling - Sleeper cab - Sun visor - Immobiliser - Tachograph - Bulkhead - USB connection - Pre-heating system - Winch = Further Information = Technical information Number of cylinders: 6 Engine displacement: 5,880 cc Front axle: max. axle load: 4,800 kg; steerable Rear axle: twin tires; differential lock; max. axle load: 8,500 kg Weights Unladen weight: 7,190 kg Payload: 4,800 kg gross vehicle weight (GVW): 11,990 kg Maintenance APK (MOT roadworthiness inspection): valid until 05/2026 Condition Technical condition: very good Optical condition: very good Damages: none = Company Information = Nidro Cars Holland is located in the centre of the country and is your reliable partner for the purchase of your car, van, or truck. The listed price is the 'internet take-away price.' For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE STOCK AT All types of trade-in are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from their content.)

Condition: used, mileage: 493,371 km, power: 331 kW (450.03 HP), first registration: 11/2020, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,520 mm, total width: 2,550 mm, loading space length: 7,850 mm, loading space width: 2,550 mm, loading space height: 1,090 mm, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional options and equipment = - Adaptive cruise control - Differential lock - Remote central locking - Refrigerator - Lift axle - Air suspension - Radio - Disc brakes - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater - Stationary air conditioning = Remarks = Daf XF 450 Superspacecab. Kjdpfx Aajw U Tuceljlp 6x2 with lift axle. Euro 6. Stand air conditioning. New loading ramp. Length: 785 cm. Width between stanchions: 243 cm Loading floor width: 255 cm. Loading floor height: 109 cm. Galvanized. Hydraulic ramps. Hydraulically adjustable together. 2 x Stainless steel toolboxes. Hardwood flooring. Recessed lashing rings in the floor. Removable stanchions and side panels. 3,500 kg ball coupling. = Additional information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tyre size: 315/70R22.5; Steerable; Left tyre tread: 80%; Right tyre tread: 80% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Left inner tread: 65%; Left outer tread: 65%; Right inner tread: 65%; Right outer tread: 65% Rear axle 2: Tyre size: 315/60R22.5; Left tyre tread: 35%; Right tyre tread: 35% Weights Unladen weight: 11,480 kg Payload: 15,520 kg Gross vehicle weight: 27,000 kg Identification Type number: XF 450 / RAMP – MACHINE TRANSPORT = Company information = ALL PRICES ARE NET EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We strive to provide correct information; however, no rights can be derived from the texts provided.

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 193 kg, SEFA Duplex Pro V3 – Pneumatic Double Platen Heat Press – 2022 Pneumatic double platen / double workstation heat press SEFA Duplex Pro V3, manufactured in 2022, in excellent condition. Machine tested and cleaned, ready for immediate use. - Delivery no included Ideal for any professional textile marking workshop requiring high throughput and reliable performance. TECHNICAL SPECIFICATIONS - Brand: SEFA - Model: Duplex Pro V3 - Year: 2022 - Type: Pneumatic double platen heat press with lateral swing - Platen size: 40 × 50 cm (16 × 20 in) - Maximum pressure: 625 g/cm² - Maximum temperature: 220 °C - Power: 2,200 W - Power supply: 240 V single-phase - Maximum substrate thickness: 45 mm - Weight: 170 kg - Dimensions: 713 × 891 × 1,079 mm - 3 pressing modes: single platen / semi-automatic / full automatic - Independent pressing time per platen - 10 storable time/temperature programmes - Foot pedal control included as standard - Automatic head translation - ECO mode, standby mode, dual piece counter - Designed and manufactured in France Kledpfx Aoyvh Rcoaljp APPLICATIONS Textile sublimation and rigid substrates, heat-seal flex and flock, screen-print transfer, laser transfer, DTF on garments and accessories, DTG pre-treatment drying. CONDITION Tested, cleaned, excellent overall condition. Available immediately. Sold by Manutech-Print, professional reseller of textile printing equipment. Contact: manutech-print.com

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: Kjdpfx Ajynh E Asaljlp The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Kedpogrkigjfx Aalslp Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: good (used), mileage: 390,809 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 07/2016, loading space length: 4,950 mm, loading space width: 2,100 mm, emission class: euro5, color: silver, driver cabin: day cab, tire size: 195/75R16, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Bluetooth - Electric windows - Electric mirrors - Halogen lights - Manual transmission - Radio/cassette - Fabric upholstery - Winch = Notes = Configuration: 4x2, twin rear wheels, payload: 1,155 kg, unladen weight: 2,345 kg, gross weight: 3,500 kg, unbraked towing capacity: 750 kg, braked towing capacity (centre axle): 3,500 kg, tow bar, winch, cab type: single cab, cruise control, air conditioning, number of airbags: 2, parking assistance: none, electric windows, electric mirrors, radio/cassette, GPS navigation, colour: silver metallic, heated mirrors, lighting: halogen, Bluetooth, engine power: 120 kW (161 hp), fuel: diesel, Euro 5, drive technology: timing chain, gearbox: manual, gears: 6-speed, power steering, ABS, ASR, starter battery, central locking, seats: 3, seating configuration: 1+2, seat upholstery: fabric, manual seat adjustment, L4 recovery truck Tijhof + winch, air conditioning, first owner, original Dutch vehicle, NAP, twin rear wheels, tow bar, spare wheel, spare wheel tread: 8%, tyre type: summer tyres = Further Information = Transmission Gearbox: 6-speed manual Axle Configuration Tyre size: 195/75R16 Brakes: disc brakes Suspension: coil spring Axle 1: tyre tread left: 3 mm; tyre tread right: 3 mm Axle 2: tyre tread left: 3 mm; tyre tread right: 3 mm Dimensions Dimensions (L x W x H): 790 x 210 x 225 cm Weights Unladen weight: 2,345 kg Payload: 1,155 kg gross vehicle weight: 3,500 kg Functional Load bed height: 85 cm Kodexyfi Ujpfx Aalelp Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration number: VX-673-Z

Condition: excellent (used), functionality: fully functional, 1 x Wraps (UK) Ltd automatic sleeve sealer with heat tunnel and gravity conveyor. Auto Sleeve Sealer: Model - AI60-351. Serial number - 3281. Belt width - 450mm wide. Previously used for 280mm wide film. Overall dimensions - 1450mm long x 1350mm wide. Heat tunnel: Model - M60-35TR. Serial number - 3279. Belt dimensions - 1950mm long x 530mm wide. Aperture (tunnel) - 620mm wide x 405mm high. Overall dimensions - 2020mm long x 1250mm wide x 1780mm high. Kodpfsyg Smbex Aalslp Outfeed gravity roller conveyor: Roller width - 490mm wide. Overall dimensions - 2020mm long x 505mm wide x 970mm high.

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 at 150 °C (W) 429 at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Klsdpeyma Nwsfx Aalep Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2010, operating hours: 13,800 h, power: 1,600 kW (2,175.39 HP), For sale are 3 MTU cogeneration modules / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These plants are ideally suited for decentralized energy generation and combined heat and power (CHP) applications. Technical specifications (per documentation): Kledpfsyt H H Nox Aalep * Electrical output: 1,600 kW * Thermal output: 1,746 kW * Gas power: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW * Voltage / Frequency: 400 V / 50 Hz Operating hours: * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h The scope of supply, as per documentation, includes a comprehensive range of auxiliary equipment and system components, including: roof-mounted air cooler, auxiliary cabinet, control cabinet, exhaust heat exchanger, water heat exchanger, pipework and ducts with chimney, oil storage room with 3 tanks and piping, as well as electrical cabling. These plants represent an attractive solution for operators, resellers, and projects in the fields of energy supply, industry, or for spare parts recovery.

Condition: good (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 423, roller width: 800 mm, We are offering this heating press from 1976 for sale. The press was in use until recently for vulcanizing tread segments for retreading wheel loader tyres. Included are also a considerable number of mould segments ranging from 420 to 750 mm in width. The press is electrically heated and has complete safety documentation. The heating surface is approximately 800x1100 mm. If you have any questions or require further information, please feel free to send us a message or call us. Kedsx Nqlvjpfx Aalelp

Condition: refurbished (used), Arburg, Thermonic temperature controller, Arburg Allrounder Kledpfx Aajyvp Upjljp 4 controllers in as-new condition. They were kept as spare parts in maintenance storage.

Year of construction: 2009, condition: ready for operation (used), A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible. Kedpfx Aaoyvuuujljlp

Condition: used, mileage: 175,730 km, power: 397 kW (539.77 HP), first registration: 08/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 10x4, wheelbase: 5,100 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, trailer coupling, = Additional options and equipment = - Differential lock - Remote central locking - Refrigerator - Towing jaw coupling - Hub reduction - PTO (Power Take-Off) - Radio - Rear-view camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox Klsdpfx Aaex Hh E Ioljp - Central lubrication system = Remarks = Volvo FH 540 10x4 Dynamic steering. Hub reduction. Workremote. Erkin ER 245.000 L 7+5 Jib. Winch. Scanreco radio remote control. Central lubrication. 6 x hydraulic outriggers. 7 x hydraulic extensions on main boom. 5 x hydraulic extensions on fly jib. Max hydraulic reach: 36.8 m. Max lifting capacity: 45,000 kg. 4.80 m - 46,000 kg. 6.80 m - 35,600 kg. 9.60 m - 24,000 kg. 11.50 m - 19,000 kg. 13.80 m - 14,000 kg. 15.90 m - 12,500 kg. 18.30 m - 11,000 kg. 20.70 m - 9,000 kg. Manual extension: 23.60 m - 7,200 kg. Jib -5: 24.30 m - 4,200 kg. 27.10 m - 3,460 kg. 29.40 m - 2,900 kg. 31.70 m - 2,460 kg. 34.20 m - 2,026 kg. 36.80 m - 1,700 kg. Manual extension: 40.20 m - 1,000 kg. 43.60 m - 800 kg. 46.80 m - 350 kg. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65R22.5; Steered; Tread depth left: 75%; tread depth right: 75%; Suspension: leaf spring Front axle 2: Tire size: 385/65R22.5; Steered; Tread depth left: 70%; tread depth right: 70%; Suspension: leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tread depth left inside: 30%; left outside: 30%; right inside: 30%; right outside: 30%; Suspension: air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tread depth left inside: 80%; left outside: 80%; right inside: 80%; right outside: 80%; Suspension: air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tread depth left: 70%; right: 70%; Suspension: air suspension Weights Empty weight: 53,320 kg Payload: 680 kg GVW: 54,000 kg Functional Crane: Erkin World Power Financial information Price: On request Identification Type number: FH 540 10x4 / ERKIN 245.000 L 7+ = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We endeavor to provide accurate information, however, no rights can be derived from the details provided in the listings.

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 2 l/h, fuel tank capacity: 20 l, color: orange, overall weight: 2,320 kg, operation weight: 2,200 kg, lifting height: 4,190 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.068 m³, suspension: other, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Are you looking for a reliable, modern, and immediately ready-for-use mini excavator in the 2.5-ton class? The LT-25P from Tec-Point GmbH impresses with powerful digging force, high-quality workmanship, and maximum comfort – perfect for construction, landscaping, agriculture, and municipal applications. With its robust steel construction, modern load-sensing hydraulics, and swing boom, this machine is ideal for tight construction sites and powerful enough for demanding earthmoving and foundation work. The fully enclosed cab with heating makes the LT-25P a true year-round professional machine! ⭐ Your advantages at a glance ✅ Professional 2.5-ton class mini excavator for daily use ✅ Swing boom – ideal for working in confined spaces ✅ Stable undercarriage 1,300 / 1,500 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-saving control ✅ Axial piston pump with high delivery rate ✅ Hydraulic piston travel and swing motors ✅ High digging and breakout forces for demanding jobs ✅ Wear-resistant rubber tracks – durable & robust ⚙️ TECHNICAL DATA Operating weight: approx. 2,200 kg Operating weight with cab: approx. 2,320 kg Engine: Yanmar 3TNV80F | 3-cylinder diesel Power: 14.6 kW / approx. 19.9 hp Max. digging depth: up to 2,410 mm Max. reach: up to 4,520 mm Travel speed: 2.0 – 3.8 km/h Gradeability: 30° ️ COMFORT & FEATURES ✔ Fully enclosed comfort cabin including heating ✔ Ergonomic joystick control ✔ LED work lighting ✔ Comfort seat for long shifts ✔ Dozer blade ✔ Robust rubber tracks ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum durability INCLUDED IN THE PACKAGE: 3 BUCKETS The delivery includes 3 professional buckets: ✅ 25 cm trench bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any job site right away! ➕ OPTIONAL EXTRAS AT EXTRA COST Hydraulic quick coupler ➡️ Note: The quick coupler shown in the pictures is not included in the standard set and can be ordered as an option. Hydraulic tilt quick coupler ➡️ Note: The tilt coupler shown in the pictures is not included in the standard set and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12 months Europe-wide warranty Spare parts & service directly from stock in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Kledpsx Hg Etefx Aalop Machines available now Viewing by appointment possible at any time Europe-wide delivery organized on request PRICE €19,900 net (RRP) Location: Rheda-Wiedenbrück Special offer price possible – contact us for details! Inquire now & secure your advantage! Demand is high – secure your LT-25P today. ➡️ Contact us directly via Machineseeker or call us – we are happy to offer you personal advice!

Condition: excellent (used), mileage: 324,381 km, power: 180 kW (244.73 HP), first registration: 11/2019, fuel type: diesel, tire size: 225/75/17.5, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), full service history, navigation system, onboard computer, power assisted steering, soot filter, traction control, = Further options and equipment = - Adaptive cruise control - Rear work lights - AUX input - Outside temperature display - Differential lock - Differential lock - Tachometer - Electrically adjustable, heated mirrors - Additional lighting - Driver’s seat height adjustment - Speed limiter - Tinted glass - Air horns - Air suspension - Centre armrest - Multifunction steering wheel - Particulate filter - Radio/CD player - Rotating beacon - Reverse camera - Disc brakes - Sun visor - Tachograph - Immobilizer - Toolbox - Power take-off (PTO) - Power take-off (PTO) = Further information = Technical information Number of cylinders: 4 Engine capacity: 4,580 cc Unladen weight: 6,425 kg Axle configuration Tyre size: 225/75/17.5 Brakes: Disc brakes Front axle: Max. axle load: 3,400 kg; Steered; Axle brand: MATADOR FHR; Tyre tread left: 60%; Tyre tread right: 60%; Suspension: leaf suspension Kjdpfx Aaeynt T Solelp Rear axle: Twin tyres; Differential lock; Max. axle load: 5,600 kg; Axle brand: CONTINENTAL HYBRID; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: air suspension Condition Technical condition: very good Visual condition: good Damages: none Financial information Price: On request = Company information = Nidro cars Holland is located in the centre of the country and is your trusted partner for the purchase of your car, van, or truck. The listed price is the 'internet take-away price'. For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE STOCK AT All types of trade are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, Year of construction: 2012, heating capacity: 150 kW (203.94 HP), For sale is a mobile pellet heating unit in container design with a thermal output of 150 kW, as well as an additional pellet buffer container with a capacity of 11,000 liters. Container dimensions: 6 m x 2.5 m x 2.9 m The heating container was built in 2013 in compliance with legal regulations and is equipped with: - Fröling pellet boiler - Buffer storage tank - Flue gas pipes - Safety devices - Control cabinet / control system The mobile heating unit is overall in good condition, especially considering its extended period of inactivity. Kjdpfx Aajytcxuoljlp However, prior to recommissioning, a functional test of the system is recommended to identify any potential defects or maintenance needs. If any repairs are required during recommissioning, this can be taken into account when negotiating the price. If you are interested or have further questions, please feel free to contact us.

Condition: used, mileage: 114,759 km, power: 118 kW (160.44 HP), first registration: 11/2015, fuel type: diesel, tire size: 215/75R17.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: orange, gearing type: mechanical, number of gears: 5, emission class: euro6, suspension: steel-air, total length: 6,900 mm, total width: 2,350 mm, total height: 3,100 mm, loading space length: 4,950 mm, loading space width: 2,220 mm, loading space height: 900 mm, Year of construction: 2015, Equipment: ABS, AdBlue, cruise control, traction control, trailer coupling, = Additional Options and Accessories = - Air suspension - Radio - Sun visor - Toolbox = Further Information = Kodsym U A Sspfx Aalslp Tire size: 215/75R17.5 Brakes: Disc brakes Front axle: Steerable; Tire tread left: 75%; Tire tread right: 75%; Suspension: Leaf spring suspension Rear axle: Twin tires; Tire tread left inside: 50%; Tire tread left outside: 50%; Tire tread right inside: 50%; Tire tread right outside: 50%; Suspension: Air suspension Unladen weight: 4,335 kg Payload: 3,155 kg Gross vehicle weight: 7,490 kg Price: On request Type number: 8-160L OPRIJ / MACHINE TRANSPORT = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian as well. We strive to provide accurate information, but no rights can be derived from these texts.

Condition: excellent (used), Year of construction: 2014, HERMANN WALDNER Agitated Tank 90.5 L Pressure-resistant magnetic stirrer with heating jacket Ksdoyn Rikepfx Aalslp Tank volume: 90.5 liters Jacket volume: 18 liters Usable volume: approx. 70 liters Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +5 bar Manufacturer: Waldner Year of manufacture: 2014 Space requirement: 90 x 95 x 175 cm Complete documentation available.

Year of construction: 2014, condition: ready for operation (used), Two identical air-cooled recoolers Güntner are available. Temperature min./max.: -30°C/50°C, max. operating pressure at 100°C: 32bar, max. operating pressure at -5°C to 40°C: -1bar, test pressure: 35.2bar, volume: 19l, PED category: III, fluid group: 1. Documentation available. An on-site inspection is possible. Ksdpfx Aasyuglnololp

Condition: used, mileage: 131,000 km, power: 118 kW (160.44 HP), fuel type: diesel, fuel: diesel, color: yellow, gearing type: mechanical, emission class: euro6, Year of construction: 2021, Year of manufacture: 2021 Cab: double VAT/margin: VAT qualifying = Additional options and accessories = - Rear air suspension = Remarks = Kodpfxeymdh Ro Aalslp 6-seater PTO Hydraulic Like new

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V -Number: 1x heating tape available -Price per piece -Dimensions: 310/255/H160 mm Kledpfxslvykxs Aalep -Weight: 4.0 kg