Used Headstock for sale (376)

Year of construction: 1979, condition: ready for operation (used), Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible. Dsdpjyln Dtofx Ag Decf

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, table width: 1,250 mm, table length: 1,120 mm, spindle diameter: 100 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Dedsx Hfugspfx Ag Decf Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Dsdpeuddglofx Ag Decf Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Condition: good (used), Year of construction: 2005, turning diameter over cross slide: 240 mm, turning length: 1,016 mm, turning diameter: 406 mm, spindle bore: 51 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, quill stroke: 120 mm, Main spindle (headstock) Spindle bore: 51.5 mm Spindle mount: D1-6 Djdsyi D Tfepfx Ag Dscf Spindle taper: MT 6 Speed steps: 12 steps Speed range: 30 – 2,000 rpm Feeds & threads Longitudinal feeds: 0.03 – 0.89 mm/rev Cross feeds: 0.015 – 0.44 mm/rev Metric threads: 0.4 – 14 mm (52 types) Inch threads: 2 – 56 TPI (40 types) Tailstock & carriage Tailstock taper: MT 4 Quill stroke: 120 mm Top slide travel: 120 mm Cross slide travel: 228 mm Drive & dimensions Main motor: 7.5 HP (approx. 5.5 kW), 3-phase Weight: approx. 1,945 kg Dimensions (LxWxH): approx. 226 x 96 x 165 cm

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Dedpfx Aox U Af Sog Docf Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: VT0650, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, workpiece length (max.): 1,100 mm, workpiece width (max.): 600 mm, workpiece height (max.): 600 mm, number of slots in tool magazine: 32, controller model: 840D, torque: 119 Nm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle motor power: 19,000 W, nominal power (apparent): 19 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: SK40, Equipment: chip conveyor, rotational speed infinitely variable, SPINNER VC1150 travel paths X1150, Y620, Z600 mm in "Compact" version in particularly heavy cross slide design for high-performance machining with patented guide cover concept therefore uniquely low chip fall and small installation area High-performance MILLING SPINDLE up to 10,000 rpm with belt drive for particularly high torque Mmax=119Nm Pmax=16KW for use in universal machining in mechanical engineering PRODUCTION PACKAGE VC1150-Compact INCREASED SPINDLE POWER from 16KW -> to 19 KW (Pmax) INCREASED RAPID TRAVEL Rapid traverse in X/Y/Z axis increased to 30m/min Tool holder on spindle SK40 DIN69871 with pull bolt DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in X/Y/Z axis SIEMENS 840DE control system with the following basic features: - Height-adjustable and rotatable control panel for good ergonomics - 19" liquid crystal flat color screen with multi-touch functionality - incl. engraving cycles - 2 GB user memory - 15 zero point shifts - 1 free USB interface - Ethernet interface standard PORTABLE HANDWHEEL SHOPMILL 3D SIMULATION of the finished part RESIDUAL MATERIAL RECOGNITION DXF reader TOUCH FUNCTIONS for integrating measuring probes Energy saving function incl. automatic machine shutdown Dcjdpfxjvpf A Ro Ag Dof UNIVERSAL CHIP CONVEYOR VC1150 PREPARATION of the spindle FOR HIGH PRESSURE for use of the additional tank up to 22 bar HIGH PRESSURE TANK 22 bar with paper belt filter for flushing centrally through the spindle Additional blowing air on the headstock Compressed air centrally through the milling spindle Flushing gun in the work area PREPARATION FOR SPINNER STANDARD MEASURING PROBE Wireless SPINDLE PROBE Electrical PREPARATION FOR EXTRACTION for the installation of a standard extraction system recommended by Spinner STANDARD DOCUMENTATION GERMAN Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-wire) PACKAGING Notes: The price only includes warranty services within Germany. For new and demo machines, the pictures are not necessarily the pictures of the individual machine but of comparable machines Accessories shown such as clamping devices or tool holders are only included in the scope of delivery if they are listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. The prior sale is expressly reserved.

Condition: new, The RSM 800 is a precision Conventional Cylindrical Grinder, designed by KNUTH to deliver exceptional grinding performance. Built on a rigid machine frame made of premium cast iron, the RSM series features long support guideways that enhance stability during operation. The machine is equipped with a hydraulic linear feed that offers infinitely variable micro-feeding, ensuring precise adjustments. You will appreciate the swiveling table for taper grinding, while the hydraulic adjustment of the headstock simplifies setup and workpiece exchanges, ultimately minimizing downtime. With a grinding diameter of 8 to 200 mm and a grinding length of 800 mm, this robust machine is engineered to meet diverse application needs. Additionally, it comes standard with essential equipment such as a 2-axis position indicator and internal grinding accessories. For a powerful and reliable Conventional Cylindrical Grinder, consider the RSM 800. Request a quote today and explore how this machine can enhance your grinding capabilities in the realm of Grinding Machines. Dcjdpfxencdx Es Ag Djf

Condition: good (used), Year of construction: 1997, Manufacturer: MAWItec Maschinenbau | Model: Turnstar III | Serial Number: 1012 | Year of Manufacture: 1997 | Control: MAWItec CNC (integrated operator panel with screen and membrane keypad) | Operating Voltage: 400 V | Frequency: 50 Hz | Design: Enclosed production lathe | Headstock with automatic clamping system | Fully enclosed working area | Integrated coolant system | Dimensions: approx. 2000 mm x 3550 mm x 1900 mm (HxLxW) | The stated dimensions are approximate values. All other information provided without guarantee. | Red/Grey | Steel Djdpfsyib A Uex Ag Dscf

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain in special paint light gray !!! Technical data: >> Year of construction 1987 Machine no. 2203-2772 >> Rigid angle table >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: Djdsvg Ewcjpfx Ag Decf >> 3-axis digital display Heidenhain >> Coolant device >> Chip tray >> Central lubrication To the machine : We are offering a Deckel FP4M universal milling machine in very good condition. The machine has little crank play and all spindles can be moved easily and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the machine under power on site.

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication Dcsdpfxeu Dm E He Ag Def To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Dcedpfx Asx S Rcmjg Def

Year of construction: 2012, condition: ready for operation (used), A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible. Dcodpfju Nlk Sjx Ag Djf

Condition: refurbished (used), Year of construction: 2000, KEKEISEN Universal Bed Milling Machine UBF-R 2000/13, Dcedorm Sigopfx Ag Dof machine no. F42460; year 2000 well maintained, very good condition, mechanically overhauled 2023 2-axis universal head automatically swivelling, with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Longitudinal travel of the table (X-axis) 2000 mm Transverse travel of the headstock (Y-axis) 1200 mm Vertical travel of the headstock (Z-axis) 1300 mm Rotary table size 1260 x 1260 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rotary table load 4000 kg Spindle power 30 kW (100%ED), max. torque 1200 Nm Spindle speed 20 - 4000 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 12 m/min rapid traverse CNC control Heidenhain TNC 426M with electric handwheel HR 410 Drive systems make Siemens Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 270 litre collecting tank Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 50 kVA without installation elements (fixators), without assembly and commissioning Price: on request, plus VAT Pricing: ex works, delivery time: short term by agreement

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: F39033, KEKEISEN Universal Bed Milling Machine UBF 2000/13, machine no. F39033; well maintained, very good condition, mechanically partly overhauled in 2025 2-axis universal head automatically swivelling, with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Longitudinal travel of the table (X-axis) 2000 mm Dsdpfx Aoykuxheg Dscf Transverse travel of the headstock (Y-axis) 1000 mm Vertical travel of the headstock (Z-axis) 1300 mm Machine table size 2200 x 960 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rotary table load 5000 kg Spindle power 30 kW (100%ED), max. torque 1180 Nm Spindle speed 20 - 3800 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 10 m/min rapid traverse CNC control Heidenhain TNC 426 CA with electric handwheel HR 330 Drive system make Baumüller Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 200 litre collecting tank Tool changer for 30 tools Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 55 kVA without installation elements (fixators),

Condition: new, Year of construction: 2025, GSD Intern One of the best-selling and most popular conventional precision lathes Impressive thanks to: Sophisticated technology Highest accuracy Durability Proven ergonomics Minimal footprint And extensive accessories. Proven for decades in single-part and small-batch production, in trade and industry, training and continuing education, and tool and fixture construction. Distance between centers 650 mm Center height 160 mm Automatic handwheel disengagement Leadscrew and feed screw covers Main spindle brake Toolmaking precision according to DIN 8605 Pole-changing brake motor Headstock gearbox 16 fixed speed levels Numerical position display (option) LED machine light TECHNICAL DATA: WORKING AREA Center height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Dcodpfxswhzcps Ag Dof Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREADING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only available with additional change gears. This machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding the available options.

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, Dcodpjvd Dbnsfx Ag Djf fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Dcsdpfxsx N I A Sj Ag Dof Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.

Condition: reconditioned (used), Year of construction: 2010, TECHNICAL SPECIFICATIONS, MODEL T 40.20 CN Dsdpfxex N I A Ej Ag Djcf Grinding length mm: 400 Grinding width with grinding wheel width mm: 225 Grinding height with new grinding wheel (on magnetic chuck) mm: 280 Magnetic chuck surface mm: 400 x 200 Longitudinal travel mm: 500 Transverse travel of the carriage under the table mm: 220 Adjustable table speed m/min: 1-30 Grinding wheel dimensions mm: Ø225 x 25 x 51 Grinding wheel rotation speed, fixed rpm: 3,000 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power 3 HP Hydraulic pump motor power 2 HP Net machine weight 1,500 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on SCHNEEBERGER linear needle slides and is controlled by a precision ball screw and a stepper motor. Vertical axis resolution: 0.001 mm. Dimension read on the display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The sub-table carriage slides on SCHNEEBERGER linear needle slides. The transverse movement is controlled by a precision ball screw and a stepper motor. Dimension read on the display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. - Longitudinal Table Movement A hydraulic cylinder and hydraulic unit located outside the machine control the table movement. VICKERS hydraulic pump SESINO air/oil heat exchanger for maintaining a constant hydraulic oil temperature Continuously adjustable table speed from 1 to 30 m/min. - Lubrication Centralized lubrication of all moving parts. - Paint Two-color paint: Safety white RAL 9003 + sky blue RAL 5015 ACCESSORIES - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various phases of the cycle: roughing, finishing, polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with LOSMA type DTE paper filter external to the machine. - Air/oil heat exchanger for hydraulic oil temperature - SPD electropermanent magnetic plate with 5+5mm fine poles, dimensions 400x200mm - Automatic dressing device mounted above the head. Hydraulic movement – ​​micrometer increments (0.001mm resolution) via stepper motor - Programmable automatic dressing operations within the cycle, with automatic grinding wheel wear compensation - Hydraulic unit located outside the machine - Grinding wheel flange with balancing shaft and grinding wheel - Standard machine guards

Condition: refurbished (used), Year of construction: 2009, TECHNICAL SPECIFICATIONS, MODEL T 60.35 CN Rawable length mm: 600 Rawable width with grinding wheel width mm: 390 Rawable height with new grinding wheel (on magnetic chuck) mm: 400 Magnetic chuck surface mm: 600x300 Longitudinal travel mm: 750 Transverse travel of the carriage under the table mm: 350 Adjustable table speed m/min: 1-30 Gripping wheel dimensions mm: 400x40x127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power: 7.5 kW Hydraulic pump motor power: 2.2 kW Net machine weight: 3,000 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on linear needle slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Vertical axis resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Dimension readout on the display. Display resolution: 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The transverse movement is performed on hydrostatic slides and is Dedox N I Arepfx Ag Dscf controlled by a precision ball screw and a YASKAWA brushless motor. Dimension readout on the display. Display resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Electronic handwheel for manual movement. - Longitudinal table movement Two hydraulic cylinders and a hydraulic unit located outside the machine control the table movement. Rotation speed is continuously adjustable from 1 to 30 m/min. - Lubrication Located outside the machine, this system controls the table movement and the lubrication of all moving parts. ACCESSORIES - LODI CNC type T 2020W with 12.1" graphic display (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, and polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with paper filter and high-pressure pump - Mist extractor (capacity 2,400 m³/h) - Electro-permanent magnetic plate, dimensions 600 x 300 mm - Hydraulic dressing device above the head with CNC-programmable automatic dressing operation and automatic grinding wheel wear compensation. - YASKAWA frequency converter for continuous adjustment of grinding wheel speed and for accelerating braking at rest. - Grinding wheel flange with balancing shaft - Complete work area enclosure - Work light

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Dedpfxsx N I Als Ag Docf Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: good (used), Year of construction: 2005, Ref. -No.: 10314 Manufacturer: PINACHO Type: S-90/ 310-155 Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Bar passage: 90 mm Travel quill: 180 mm Dcodpfxsx Sw Dqj Ag Dof Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Tip length: 3000 Cross Movement. (X-Axis): 365 mm Spindle Bore: 155 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm Jaw chuck diameter: 380 mm Turning Speed Range: 16 - 750 rpm Further information: - The lathe has two jaw chucks on the headstock - metric, Whitworth and inch trapezoidal threads can be turned - adjustable feeds for cross face and longitudinal face turning (0.05 to 1.5 mm/u)

Condition: used, Year of construction: 2008, Here are some key details: - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 features a Karstens machine bed on which the CNC system is mounted.) - Year of manufacture: 2008 / operated in single-shift use only - 1000 mm between centers - Workpiece spindle headstock and tailstock MK4 - Wheel diameter up to 500 mm - Wheel mounting at a 26.5° angle - Grinding wheel drive with programmable SUG - Grinding spindle headstock manually swivellable on air cushion - Wheel positioned on the right - Internal grinding attachment mounted at the rear, including dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding: yes - Automatic dressing Dcedpfx Agexmurxo Djf - Marposs acoustic emission monitoring for external grinding wheel, including software package - Grinding wheel spindle and workpiece spindle driven by V-belt drive

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Dedpfx Ajxmurrjg Docf

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm Dcedjwrh H Nepfx Ag Djf tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Year of construction: 1999, condition: ready for operation (used), Copying range U/V: 1400mm/1060mm, table longitudinal movement U: 1500mm, column transverse movement V: 1060mm, headstock vertical movement W: 900mm, max. spindle-table distance: 1025mm, probe adjustment range X/Y/Z: 300mm/150mm/250mm, probe mounting swivel range: +/- 15°, speed: 4000rpm. Including documentation, headstock and spindle. Dcedpfxeh Tkn Nj Ag Dsf