Used Headstock for sale (366)

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Nwodpfx Amovca Izsneg Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), STAR SV-20 CNC automatic lathe TECHNICAL DATA OF THE CONTROL AXES rapid feed X,Y: 15000 mm/min rapid feed A,B: 15000 mm/min rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C axis: 0.001°. MACHINING CAPACITY Nsdpfeiq Dp Nsx Amnewg Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: stationary: 14 mm; driven: 8 mm Max. Tapping capacity: Stationary: M10 X P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: spindle drive main spindle motor: 3,7 / 5,5 kW main spindle bore: 26 mm PICK-UP SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Unclamping length: 75 mm spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2,2 / 3,7 kW Indexing angle: 1°, 15 CONFIGURATION Operation mode: right-handed Dimensions: 2670 x 1375 x 1650 mm Weight: 3400 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 80 [mm] - Z-axis travel : 220 [mm] - Max module : 2.5 - Max workpiece-holding spindle speed : 3000 [rpm] Nwodpfx Aoyuzggsmnsg - Max dimensions of the hob (diameter x length) : 118 X 120 [mm] - Speed of the hob-holding spindle : 200-5000 [rpm] - Shifting travel : 140 [mm] - Angular travel of hob-holding headstock : -45/+115 [°] - Machine floor space : 2700/2180 [mm] - Machine height : 2310 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840D PowerLine - Loading manipulator

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 80 [mm] Nwodsyuzgajpfx Amnsg - Z-axis travel : 220 [mm] - Max module : 2.5 - Max workpiece-holding spindle speed : 3000 [rpm] - Max dimensions of the hob (diameter x length) : 118 X 120 [mm] - Speed of the hob-holding spindle : 200-5000 [rpm] - Shifting travel : 140 [mm] - Angular travel of hob-holding headstock : -45/+115 [°] - Machine floor space : 2700/2180 [mm] - Machine height : 2310 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840D PowerLine - Loading manipulator

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 4,350 kg, number of axes: 3, This 3-axis ONA QX4 die-sinking EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The work tank dimensions are 1060 x 750 x 480 mm, accommodating a maximum workpiece weight of 1500 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA QX4 machine we have for sale. Contact us for further details. • Work tank dimensions (L x W x H): 1060 x 750 x 480 mm • Maximum workpiece weight: 1500 kg • Maximum electrode weight: 100 kg • Distance table to headstock: 200–600 mm • Voltage: 400 V • Frequency: 50 Hz • Current: 25.8 A • Power: 17.9 kVA • Minimum air supply: 6 bar Nodoy Eq Ipopfx Amnjwg • Generator unit weight: 350 kg

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas M70 Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + FMB m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 Nwedpfoy Hl Hiox Amneg equipped with swarf & coolant tank, fire distiguisher. ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) LFV function: no

Condition: used, Year of construction: 2021, gebraucht 2021 3965 prompt, Zwischenverkauf v Taiwan 15600 € 1 12480 € 42 mm MK 4 280 - 1.100 mm 44 - 1.500 (12) U/min Stahl: M 25; Guss: M 38 1880 mm 870 mm 2210 mm 1800 kg 470 - 1.270 mm 0,05 - 0,15 (3) mm/min 2.2 kW 260 mm 280 mm 1.725 x 715 x 180 mm 0,75 kW 635 x 520 x 415 mm 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH Nwsdpfx Aew Np Nxsmnog BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, CNC sliding headstock automatic lathe Make: STAR Model: SR-20 Year: 1998 with: FANUC 16-T control Back side machining Synchronised spindle Driven tools C-axis Nwsdpfoy Hg Hdsx Amneg Bar feeder magazine FMB TURBO 3-26

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar Nodpfxev Hzqxj Amnowg - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: used, Mechanic's Lathe SCHAUBLIN Type 102 Mach. No. 1998 Centre distance: 350 mm Bed length overall from headstock: 635 mm Swing over bed: 200 mm Centre height over bed: 102 mm Swing over cross slide: 120 mm Centre height over cross slide: 61 mm Spindle bore: 18/20 mm Spindle speed, gear stage 1: approx. 120 / 190 / 320 rpm Spindle speed, gear stage 2: approx. 590 / 970 / 1500 rpm Chuck mounting: external thread M38 x 3 mm Tailstock taper: MT 1 Drive motor: 0.55 kW, 920 rpm Power supply: 380 Volt, 50 Hz Nsdpfx Amsy Dvf Renewg - Spindle speeds adjustable via 2 gearbox stages and 3-step drive belt shifting - Main spindle with forward and reverse operation - Spindle mount with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet clamping system with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm - Integrated dividing plate on main spindle with 48 / 60 / 100 holes - Toolholder slot approx. 10 x 18 mm with clamping screw - Sturdy wooden base with 42 mm laminated board Required space (with stand): L x W x H: 1160 x 750 x 1300 mm Weight with stand: 150 kg Good condition

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Nedpfxoy Edz Ae Amnewg Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 9,132 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 3,700 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 32 m/min, overall weight: 1,750 kg, bar passage: 20 mm, Equipment: documentation/manual, Swiss-type CNC Lathe TSUGAMI B0206E-II TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate X1 axis: 24000 [mm/min] Rapid traverse rate X2 axis: 24000 [mm/min] Rapid traverse rate Z1 axis: 32000 [mm/min] Rapid traverse rate Z2 axis: 32000 [mm/min] Rapid traverse rate Y1 axis: 15000 [mm/min] Rapid traverse rate Y2 axis:15000 [mm/min] Max. bar diameter: 20 [mm] Min. spindle speed: 200 [rpm] Max. spindle speed: 10000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 3.7 [kW] Nedey Eff Aepfx Amnjwg Min. counter spindle spindle speed: 200 [rpm] Max. counter spindle speed: 12000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 2.2 [kW] Number of positions end attachment: 8 Number of positions guide bush holder 1: 5 Number of motorized positions guide bush holder 1: 3 Live tools speed guide bush holder 1: 8000 [rpm] Number of positions secondary operation: 8 Number of motorized positions secondary operation: 4 Live tools speed secondary operation: 8000 [rpm] Max. tool holder cross-section: 12 x 12 [mm] Working hours: 9132 [h] Weight: 1750 [Kg] INCLUDED EQUIPMENT: x1 sliding headstock (direct drive) x1 counter spindle (direct drive) x1 rotary guide bush (direct drive) x108 collets x7 live tool holders x1 parts catcher x1 parts conveyor belt x1 parts ejection device x1 chip conveyor x1 coolant tank x1 oil mist extraction unit, 3nine LINA type x1 IEMCA ELITE 220 E / 32 XL bar feeder x1 set of accessories for IEMCA ELITE 220 E / 32 XL bar feeder x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical transformer x1 3-color status light x1 set of IEMCA manuals x1 set of FANUC manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Citizen, Nomura, Tornos, Miyano, Index, Traub, and Star lathes, as well as machining centers, milling machines, and grinding machines.

Condition: good (used), center height: 215 mm, grinding length: 1,500 mm, total width: 2,300 mm, total length: 5,530 mm, total height: 2,100 mm, grinding diameter: 430 mm, Matrix Okuma Universal Cylindrical Grinder Model: GU – 40 Max Dia Ground: 430mm Nwjdeyglhfspfx Amnog Max Between Centres: 1500mm Wheel Size: 355 x 50 x 127mm Headstock Speed: 10-150 RPM Variable Table Swivels: 8 Degree Machine With: Coolant Filtration Tank Steadies Internal Grinding Attachment with Quill Dimensions: 5530 x 2300 x 2100mm High Weight: 6200 Kgs

Year of construction: 2008, condition: ready for operation (used), travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: TNC426, spindle speed (max.): 3,500 rpm, table length: 850 mm, table load: 3,000 kg, table width: 850 mm, This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine. Machine Benefits Qualitative Machine Benefits • Precision control, very good condition Technical Machine Benefits • Diameter of the working spindle: 128 mm • Retrofitted in 2008 • Robust table design Extra Information Njdpey Altuofx Amnewg Machine still under power // Machine was checked and refurbished in 2024: ■ cleaning, technical inspection of the machine ■ replacement of the Heidenhain TNC426 control system ■ complete inspection of the electrical cabinet ■ replacement of damaged cables ■ repair of the control panel ■ repair of the complete geometry of the machine (geometric accuracy protocol on request) ■ inspection of the drives (new bearings for the X+Z ball screw bearings) ■ inspection of the headstock ■ inspection of the hydraulic unit ■ inspection of lubrication and reinforcement ■ new telescopic covers

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 Nodpfxer D Nmye Amnswg - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Nwjdey Sf Azspfx Amneg Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: good (used), Year of construction: 2018, KSI TCM 38 CNC sliding headstock lathe, Nwodpfxsuixvfs Amnog Year of manufacture 2018, Fanuc Oi-TF control system, Bar machining up to 38 mm, LNS XH 552 loading magazine, Counter spindle up to 6,000 rpm, spindle speed main spindle up to 8,000 rpm, 2 x C axis, tools attached, 16 tools, max. turning length 300 mm,

Condition: good (used), Year of construction: 2018, Ref. -No.: 10643 Manufacturer: FERMAT Type: Gantry Year of construction: 2018 Type of control: CNC Control: Siemens Sinumeric Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 20000 mm Y-Travel: 7800 mm Z-Travel: 2000 mm W-Travel: 1000 mm Turning Speeds: 20000 RPM Speed work spindle: 0 - RPM Max. Torque: 3294 Nm Rapid Traverse X/Y/Z: 40000 m / min Table-Size (Lxw): 20000 x 5000 x 300 mm Nwedpsyzpxfefx Amneg Power Capacity: 74 kW Headstock - (spindle diameter): 160 mm Further information: - Tool cooling - Low pressure - Tool cooling - High pressure 50 bar (6,000 liters) - Tool cooling - Oil separator - Sludge pump - Machine enclosure (CE) - Electrical - Linear measurement - Electrical - Remote diagnostics - ATC/Robot Robot 140 - Chip conveyor 2 - Operator cabin / protective screen - Electrical - HH iTNC 640 control system - Electrical - Handwheel - Electrical - Air conditioning for the distributor - Head - Type 2x UHA 0.001 The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Nwodewhm Rfjpfx Amnsg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2000, INDEX ABC 60 Spindle automatic CNC operational, fully functional Year: 2000 Condition: very good, operational Ready for immediate delivery Machinery runs without any problems. Technical details: 1-Spindle Automatic CNC Fized Headstock Lathe Serial number 400290 control SIEMENS 840 C Njdpfx Aey Nycdomnewg passage: 65 m tool turrets with driven tools: 2 front and rear side machining chip conveyor: KS SRF 040.00 Bar loading: SCHMID LN 3200 Weight machine: 3500 kg. Overall size: 6500 x 1500 x 1800 mm. We are waiting for you in H.B.R. srl - ITALY

Condition: new, neu ca. 12 - 14 Wochen ab Auf Spanien 50410 € 952.75 € 35 mm Nedpjynmtxofx Amnjwg MK 4 390 mm 94- 2.225 (16) 50 Hz 113 U/min M35 1660 mm 1510 mm 2600 mm 910 kg 180 mm 190 - 650 mm 1310 mm 125 mm 400 x 420 mm 0,10 - 0,18 - 0,24 (3) mm/min 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: R6L211501, EMCO Turn S65 TM – 2-axis CNC lathe with EMCO SL1200 short bar loader - 2-axis CNC lathe without tailstock, featuring driven tools and C-axis - 18 kW drive power - 0–4,200 rpm spindle speed - Linear guideway system - Digital drive technology - Direct spindle encoder - Sinumerik 828D with ShopTurn conversational programming Equipment Nwedeyzn H Uopfx Amnsg - 12-position VDI 30 axial tool turret with direction logic for up to 12 live tooling stations (5 kW, 20 Nm, 0–5,000 rpm) - C-axis for main spindle - Mechanical spindle brake (minimum increment 0.01°) - Size 65 headstock with KK6 spindle nose (DIN 55026) - Hollow clamping cylinder incl. draw tube - Machine lamp - Coolant system - Hydraulic power unit - Interface for chip conveyor - Documentation Other features - EMCO SL1200 short bar loader ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing solutions adapted to your needs. Whether down payment, installment plans, or individual financing models – together we will find a solution that fits. If you wish, we can also handle the complete logistics and transportation. From planning to punctual delivery, we ensure a smooth and reliable process, so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide personal and professional advice. ----- Subject to prior sale, errors, and changes.

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 750 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg (between centres) – 250 kg (supported between centres) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, stepless speed adjustment 30–450 rpm, swivel range 0–90° Tailstock: MT 4, quill stroke 45 mm, quill offset adjustment Quill force: 200–600 N manual, (up to 2500 N adjustable as option) Table swivel adjustment: 12.5 degrees Cross slide travel: 80 mm Rapid traverse distance: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW optional) Stepless speed setting of the grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Machine weight: Net 3,500 kg Feed drive via DC motor Air-cushioned rapid adjustment of the grinding spindle head for fast and precise positioning. Separate drive for external and internal grinding spindles. Fully automatic operation, feed movement controlled via handwheel switch: rapid feed, rapid return, grinding operation, feed stop, mym-feed. Automatic longitudinal grinding cycle Nwodpfx Amsiv Audensg Central coolant supply for all grinding zones Workpiece headstock with steplessly adjustable drive, with live and lockable spindle. Digital feed control with Siemens panel and Siemens PLC for plunge and traverse grinding, input for retraction, infeed values, feed rates, spark-out times, idle strokes, compatible with traditional Karstens infeed control, with colour Siemens touch panel. Scale in X and Z axis by HEIDENHAIN. Comparable with Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university environment and was only used very sparingly. All cables and hoses in the wet area have been replaced. It has extremely low operating hours. As we specialize in Karstens cylindrical grinding machines, we can offer you full service (electrical and mechanical) for the machine after purchase. Technical Data: Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 70 kg (between centers, cantilevered), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: Morse Taper 4, infinitely variable speed 30–450 rpm, swiveling range 0–90° Tailstock: Morse Taper 4, quill stroke 45 mm Tailstock rest beside Z-axis table Quill force: 200–600 N Table swivel: 12.5 degrees Travel of infeed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3,500 kg Nedpfxjh Rit Es Amnjwg Infeed drive by DC motor Air cushion-supported rapid adjustment of the grinding spindle headstock for fast and safe positioning at the grinding station. Separate drives for spindles for external and internal grinding. Fully automatic operation cycle, feed movement controlled via rotary switch: Rapid advance, rapid retraction, grinding mode, feed stop, mym-feed adjustment. Automatic longitudinal grinding cycle Central coolant supply for all grinding stations Workpiece headstock with infinitely adjustable drive for rotating and lockable spindle. Infeed control for longitudinal grinding and plunge grinding, settings for retraction, feed amounts, feeds, spark-out times, idle strokes. Digital readout for X-axis by Heidenhain Paper band filter unit can be offered on request. Comparable to Weiss/ EMAG/ GP-cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 1100 mm Nedoiv Au Ejpfx Amnswg Centre height: 180 mm (250 mm optional) Workpiece weight: 100 kg between centres (unsupported), 300 kg between centres Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed control 30–450 rpm, swivelling range 0–90° Tailstock: MT4, quill stroke 45 mm Quill force: 200–600 N manually, (up to 2500 N adjustable, option) Table swivel: 10° Cross slide travel: 80 mm Rapid traverse: 50 mm Coarse adjustment (air cushion): 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3,800 kg Infeed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for fast and safe positioning to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operation, infeed movements controlled via rotary selector switch: rapid advance, rapid return, grinding mode, infeed stop, micrometre infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding points Workpiece headstock with infinitely variable drive for rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for traverse and plunge grinding; input for retraction, infeed amounts, feed rates, spark-out times, idle strokes; compatible with the original Karstens infeed control; with coloured Siemens touchscreen; HEIDENHAIN scales in X and Z axes. Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna