Used Hand Edge Banding Machine for sale (70,272)

Condition: good (used), Year of construction: 2009, Brandt KDF 891 edge bander, SN 0-261-04-5551, year 2009, Godpfx Amjv Rvp Rjueit Brandt Power Control PC20+ control system, Ligmatech ZHR 05/R/085 return unit, year 2009, SN 0-305-06-2999, conveyor belt with approx. 9 m width, approx. 80 cm

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately. Gedpfsythxmex Amueit

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 915 kg, Worktable dimensions 3465x710mm, height 875mm Gluing thickness roller edges 0.4 - 3mm Glue-on thickness strip edges up to 5mm, min - max. workpiece thickness 8-50mm min. Workpiece length/width with roller edges 190/110mm min. Length of panel 120mm Feed speed 9 m/min Feed motor 0.55 kW Working air pressure of pneumatics 6.5 bar Suction hood glue container 80mm 2 suction hoods Flush trimming unit 60mm 2 extraction hoods Pre-milling unit 80mm Working temperature 20-190C° Equipment: Pre-milling unit (jointing) Rounding unit (corner copying) Gluing unit, applying and pressing on the edge (self-lubricating glue pot) Trimming unit, for cutting off 90° of the protruding edge at the front and rear Flush trimming unit (joining) Godjuacqzspfx Amueit Scraper unit Buffing unit Surface scraper Automatic application of the strip edges with edge magazine Kit for quick change of the glue container Device for heating the panel edge Non-stick agent spraying unit Spraying unit for finishing the edge

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" Gsdpfx Amjwkf Ihouoit - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AH/003306, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 3,200 mm, feed rate X-axis: 40 m/min, TECHNICAL DETAILS Mobile shoulder opening: 3,200 mm Maximum panel width: 3,200 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Edge thickness (coil), minimum PVC-ABS: 0.3 mm Edge thickness (coil), maximum PVC-ABS: 3 mm Feed speed: 10 - 40 m/min Distance between retractable pins: 500 mm EQUIPMENT Motorized pressure rubber belt Support track with retractable pins CNI control unit in a separate control cabinet Rectifier unit with two motors (one for each side) Glue application unit with EVA glue premelter Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapping trimming group Staggered finishing unit with two motors Corner rounding unit with 4 motors Giodpoxx N D Hofx Amust Milling unit tiltable 0-90° Edge scraping unit Brushing group

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AH/105752, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, control type: PLC-controlled, TECHNICAL DETAILS Panel height: 10–60 mm Solid wood: 15 mm PVC/ABS: 3 mm Feed speed: 12–18 m/min Working height: adjustable via PLC MACHINE DETAILS Control: PLC EQUIPMENT Adjustable panel support guide Side roller conveyor with idler rollers for panel support Rectifier group Roller holder plate Godpfexx Nf Dsx Amuoit Gluing unit for EVA adhesive with premelter Edge pressing group Trimming group Scribing group with overlapping motors Tiltable copy unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush group

Condition: new, Year of construction: 2025, Various glue tanks for edge banding and squaring edge banding machines. We supply new glue tanks or overhaul your used one. We also sell single spare parts. Scm, Stefani, Idm, Ima, Biesse Giedpfx Aef Tc Rqjmuet

Condition: new, Year of construction: 2025, Edge Banding Machine F5 with PLC control (incl. 15" touchscreen), hot melt adhesive application to the workpiece for edge materials up to 3 mm: Joint trimming unit (incl. DIA tool) up to 2 mm trimming depth, Gsdpfx Amjh Hl Ayeujit maintenance-free glue pot with changeable pot setup, incl. adhesive discharge device, HF milling station with pneumatic adjustment, incl. corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), cleaning station, jointing head Whispercut, combination milling head, radius milling cutter R=2mm, radius corner milling cutter R=2mm, quick-change system for corner milling cutter, radius changeover motor R=1mm, multi-radius scraper R1/R2, undercarriage, spraying device for separating agent (PUR), spraying device for cleaning agent (PUR), pneumatic 3-point adjustment, LED lighting, INCLUDES 2nd interchangeable glue pot, max. edge thickness 3mm, workpiece thickness 8-50mm, min. workpiece length approx. 160mm, feed speed 10m/min, ready for operation in approx. 3.5 min, dimensions approx. 4300x1300x1400mm (LxWxH), weight approx. 900kg, extraction nozzle 1 x 140mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available. Godpsxdr Swefx Amusit

Condition: good (used), Year of construction: 2011, For sale is a first-hand used SMC edge banding machine in good condition. Manufacturer: SMC Year of manufacture: 2011 Type: Olimpic S 2000 "Model A" Weight 2000 kg Feed rate: 12-18m/min Working height (panel thickness): 8-60mm Edge thickness: 0.4mm - 6mm - Flush trimming unit - Snipping unit - Surface scraper - Rounding unit all data without guarantee, sale only to commercial customers. Inspection by appointment in Karlovarská 1415, 363 01 Ostrov, Czech Republic Gsdpfxohf Aclj Amueit Collection in Ostrov (Czech Republic) or in 94424 Arnstorf (Germany)

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding Gjdpfxex Eilqs Amueit automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Year of construction: 2001, functionality: fully functional, Used, fully functional OTT PACIFIC for sale! Machine length: 6.30 m! Gjdsxc Hhkjpfx Amusit

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE Giodpfx Amsv I Sayjuet FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total height: 1,400 mm, total length: 4,000 mm, total width: 1,200 mm, OTT ATLANTIC EDGE BANDER 2 HM SAW BLADES 140X3.2X16 Z=36 FLUSH MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS Gjdeww H Enjpfx Amueit FINE MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS SCRAPING UNIT WITH 2X HM SCRAPERS, AUTOMATIC FEED EDGE CLEANING – OSCILLATING BRUSHES MACHINE LENGTH: 4.50 M

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: 0-261-04-6440, functionality: fully functional, Feeding and removing of workpieces: • Pressure beam with rollers • Variable feed speed 8-14 m/min • Automatic grooving fence • Glue pot QA65 Edge banding: • Multifunctional profile scraping unit with R-2 and R-1 tools • Corner rounding unit with R-2 tool Finishing of the workpiece: • Anti-adhesive and cleaning fluid • End trimming unit • Edge milling unit with R-2 and R-1 tools • Flat scraper, top-bottom polishing unit • Prepared for connection to a return system Documentation • Selected language: Polish • Documentation in machine control, in printed form Gijdpfxoykzdks Amujt General information • Year of production: 2019 • Machine length: 5573 mm • HOMAG control - POWER TOUCH • CE mark • Processed meters: 800,000

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edgebander LUMINA 1380 Multi PUR & EVA glue application (up to 60mm) + NIR unit / laser edging up to 45mm, as exchangeable station Jointing milling unit IntelliSet - tool correction fa.s.t. - Set-up on the fly iTronic - pressure & glue quantity control Fully motorized configuration of all units Multi-function milling units - 1.3mm radius (double) & 2mm (double) Spraying units and much more... The machine is currently being refurbished at the factory in Voitsberg, Austria. Delivery, installation, and commissioning can be arranged directly through us at additional cost. The machine is currently located in our distribution warehouse in Gratwein, Austria. Gedpfx Amex E A Disujit In the event of discrepancies between the German and a foreign language version, only the German version is binding. Our Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Gijdpjx Emf Dofx Amujt Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Hebrock K34 PLC control with 15" touchscreen Pre-milling unit for joining before the gluing part (3 mm) Glue pot with removable pot and glue outlet device Max. edge height 60 mm Cross-cutting unit Milling unit for flush/radii/bevel trimming Corner rounding unit for radii/bevels Multi-radius scraper (R1/R2) Nesting Gsdowtfvkspfx Amuoit Surface scraper Release agent spray device Year of manufacture 2023, 52 operating hours Machine is in mint condition From carpentry liquidation / retirement from carpentry

Condition: excellent (used), Year of construction: 2015, - Workpiece thickness up to 60 mm - Edge thickness up to 3 mm - Feed speed: 16 - 20 m/min - Total length: 9365 mm - Powercontrol PC23 Units: - Separating agent spraying unit top/bottom - Joint trimming unit 2x 3 kW - Gluing unit with 2-roller magazine - End trimming unit HL 81 0.8 kW - Pre-milling unit FF30 bottom/top; 4x 0.4 kW - Free space for 2 units - Profile scraper PN 10 Gsdpfx Amjw R T Alouoit - Surface scraper - Cleaning agent spraying unit - Buffing unit

Condition: excellent (used), 2 pre-cutters gluing unit Guillotine Gijdpfxeulh Nus Amust Drip unit with 2 saws Straight cutter Rounding cutter

Condition: excellent (used), Adhesive unit Guillotine Gsdpferzaavox Amueit Chop saws Straight cutters Scraper Polishing machine Without pre-milling

Condition: excellent (used), Gluing machine Guillotine Giodpfxettu Rio Amuet cross-cut saws milling cutter Scraper Polishing machine

Condition: ready for operation (used), IM Very good condition. Gsdpfsvunm Aox Amuoit

Condition: as good as new (ex-display), Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min. Giedpfx Amexh Spksujt

Condition: new, Year of construction: 2013, 0,4 - 15 mm Giedpfx Ajx Dng Rsmuot Workingpiece thickness from to 10 - 60 mm Feed speed 18 m/min.