Used Hacker Knife for sale (1,501)

Condition: used, Mechanical guillotine shear with lift release via foot switch in very good condition Bodpozzkq Tjfx Aa Iodh Max. sheet thickness: 2.5 mm steel Max. cutting length: 1040 mm Motor-controlled rear stop up to 750 mm Pneumatic sheet metal hold-down cutting gap adjustment Side stop knife sharpened Weight: approx. 900 kg

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke Bdodpfx Aaexabpdj Ioh * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Maximum roll length: 1500 mm - Maximum roll diameter: 1250 mm - Machine weight: approximately 3800 kg - Tank capacity: approximately 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight design slitter table - Documentation: 2 copies in German (1 printed, 1 on USB) - Color: RAL 5012 - light blue Protective grille/knife beam: RAL 1028 - melon yellow Machine in stock, immediately available Bdjdpfxsltmi So Aa Ioh Price and further information upon request.

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife set for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 590/390/H220 mm -Weight: 71 kg Bedpjwy Ryusfx Aa Iodh

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: various versions, see photos .: 6x 2334850 / 3x 2334830 / 1x 2335190 thickness 1.6 / 1 / 2.7 mm Bsdpfxowzhfqs Aa Isdh -Price/Delivery: complete -Transport dimensions: 375/111/H20 mm -Weight: 1.6 kg

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: 3 cutting blades, see photos -Hole: Ø 30 mm -Dimensions: 430/310/100 mm -Weight: 22.9 kg Bsdpfx Aowzhhxoa Iodh

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: for profile steel shears, flat steel shears, 2 pieces -Hole spacing: 135 x Ø17 mm -Dimensions: see photos -Submission/Price: complete -Dimensions each: 175/107/H125 mm -Weight: 6.1 kg/pc. Bjdpfozr Hlnex Aa Iodh

Condition: used, Year of construction: 2006, machine/vehicle number: 1624, Item No. 26248 Technical specifications: Bedpfx Aaezxc Hzs Iedh - For sheet metal with 4 sides, diameter up to approx. 1200 mm - For sheet metal with 8 sides, diameter up to approx. 1500 mm - Overhang of the knife head: 240 mm - Overhang of the guide arm: 900 mm - Max. cutting capacity at 45 Kp/mm²: 4.0 mm - Drive speed, infinitely variable: 6 to 30 m/min - Manual material clamping + manual adjustment of the knife - Drive: 400 V / 3.00 kW - Electric foot switch - Space requirement: approx. W 2450 x H 1700 x D 950 mm - Weight: approx. 1300 kg

Condition: used, grinding length / mm grinding width / mm workpiece height / mm Schanbacher S 3 50 Saw Blade Sharpening Machine – working condition – industrial unit Bsdoy E Tyuspfx Aa Ijdh For sale is a high-quality circular saw blade sharpening machine manufactured by Willy Schanbacher KG (Germany). The machine is ideal for precise sharpening of circular saw blades used in metal and woodworking industries. Technical details: Manufacturer: Willy Schanbacher KG (Esslingen, Germany) Type: S 3 50 Serial number: 93 2187 Machine type: Saw blade sharpening machine Condition: Working condition Used, with normal signs of wear Last used without issues Features: Adjustable grinding angles (e.g. 90°, 120°, 140°) Precision grinding unit Feed mechanism for consistent sharpening Safety guard included Heavy-duty industrial design Applications: Metalworking Woodworking Workshops and sharpening services Scope of delivery: Machine as shown ?? Inspection possible by appointment ?? Shipping via freight forwarding available

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min Bedpfx Aaezx Ri Do Iedh • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: excellent (used), Year of construction: 2015, Laska G530 Frozen Meat Cutter LASKA frozen meat cutters are ideally suited for cutting deep-frozen meat and fat, as well as frozen fish, cheese, and vegetables. Frozen meat cutters are designed to cut complete blocks of deep-frozen material before this material is further processed in slicers or mincers. The frozen material to be cut is fed through a loading mechanism and typically dispatched into standard transport vehicles after cutting. Frozen blocks of meat are cut into slabs of adjustable thickness by a cutting beam that moves up and down, with an interchangeable cutting knife attached to it. These slabs can simultaneously be portioned into smaller pieces by using additional cross-cutting knives. The guillotine cutter can process material with a temperature as low as -25°C. Brand: Laska Type: G530 Year: 2015 Power: 400V / 50Hz / 5.5kW Temperature: -25°C Bedpfx Ajzwdudja Ijdh Block cross-section max. (mm): 520×300 Cross-section (mm): 28 – 60 Capacity: Up to 5,000 kg/h Machine Dimensions (LxWxH): 2,400×1,100×1,850 mm Machine Weight: 1,000 kg.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Jogging Table (Delivery) Bodpfxezvn Hze Aa Iedh

Condition: used, 325L bowl capacity blad shaft motor power 120 kW/306 A (AC) Bowl motor power 3.7 / 4.4 kW - 8.2 / 8.8 A Ejection motor power 1.5 kW - 3.5 A Hydraulic pump motor power: 2.2 kW - 5.0 A blade shaft fan motor: 0.3/1.2 kW - 1.5/4.4 A Other: 3 kW - 8 A Total power: 133 kW - 337 A Temperature measurement Operating voltage: 400 V / 50 Hz Control voltage: 24 VDC / 230 VAC Control: Cut Control Pro 2-speed turntable Product ejector (right) Knife cover Bowl cover Automatic lubrication Loader for Eurobins 200L (left) Weight: ± 5.390 kg Bdsdpfxjzvbxwj Aa Ieh Water connection 1" / 3-4 bar Air connection DN6 / 6 bar For dimensions, see the attached PDF.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, For sale is a robust MAKA/Griggio surface planer, model AH 430. The machine features a robust, heavy-duty design and is suitable for professional use in carpentry, joinery, and woodworking. Technical data / Features: Manufacturer: MAKA/Griggio Model: AH 430 Planing width: 430 mm Year of manufacture: 1994 Motor power: 4.0 kW Connection: 380 V / 50 Hz / 3 phases long infeed and outfeed tables, total length approx. 2,600 mm 4-knife cutterblock CENTROFIX system with reversible knives adjustable fence manual chip thickness adjustment via handwheel dust extraction port motor brake GS-tested for dust emissions massive and robust construction The machine is in used condition, which is good considering its age. The surface planer was used as a training machine in a vocational school and is fully functional. Bdedezvu Uxopfx Aa Ieh The machine is subject to differential taxation. An inspection and demonstration can be arranged by appointment. Transportation is possible for an additional fee! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes reserved. All information without guarantee.

Condition: used, functionality: fully functional, Holzher edge banding machine for 0.5 - 8 mm edge banding Year of manufacture: 1995 Type 1436 SE Bsdpfxszv Ehps Aa Iodh With glue reservoir Without pre-milling Cut-off knife Flush trimming Radius milling Radius pull blade Smoothing unit Dimensions 420 x 100 x 160 cm

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Bjdpfx Aaozz Hhns Iedh Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Horizon AFC-546 AKT Folding Machine Fully operational, ready for production. The machine is from the first owner. Very good condition. Rollers recently refurbished. Manufactured by Horizon, Japan Equipment: 6 parallel cassettes 1 electronic knife 2 knife cassettes Maximum format: 540x760mm; min. 120x172mm The machine is set up entirely using a touchscreen control panel. The kit includes: – tool kit – additional components Bsdpfx Aaezz Hgqo Isdh – user manual – compressor

Condition: good (used), Year of construction: 1996, functionality: fully functional, - Manufacturer: MBO - Model: K 820-4KTLT - Machine type: Folding machine (combination folder) - Format width: 82 cm - Typical application: High-performance folding for large printing sheet formats - Features: 4 folding pockets, KTLT configuration (combination of buckle, knife, and cross fold), high production speed, precise folding results - Areas of application: Industrial printing plants, finishing operations with large-format production Bdodpfxoxby Nxj Aa Ijh

Condition: good (used), Year of construction: 2009, functionality: fully functional, 6 pockets Control unit: Navigator-Control with touchscreen Folding units 1st unit Pockets: 6x Cross fold unit with 2 knives Second knife aligned to: left 1x side pocket Noise protection hood Bdsdpfx Aaexbpv Ue Ish with Palamides Alpha 700, year of manufacture: 2007, stack delivery

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of Manufacture: 2022 Condition: Like new Machine Type: Cutting Plotter / CNC Milling Machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Used very little and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise knife depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Bdjdpfey Tk R Hsx Aa Ioh Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Camera System AKI System Cutting accuracy: 0.1 mm Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Disassembly, reassembly, and transport costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is considerable, an inspection can also be carried out via live video. All information is provided without guarantee. Subject to change, errors and omissions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, power: 5.5 kW (7.48 HP), planing width: 520 mm, actuation type: pneumatic, Usable working width 520 mm Total table length 2310 mm Knife shaft diameter 120 mm Planer shaft speed 5000 rpm 4 knives 35x3x520 mm Aluminum fence 1200x190 mm Fence angle adjustment from 90° to 45° Min./max. planing height 3 / 250 mm Feed rate (thicknessing) 5-8-12-18 m/min Dust extraction port diameter (planing) 120 mm Dust extraction port diameter (thicknessing) 120 mm including: Bdjdpfx Aaez Aukae Ioh Tersa knife shaft Auxiliary fence Planer safety guard Electric thickness table adjustment

Condition: used, Year of construction: 2006, - Max. cutting length: 2600 mm - Cutting widths: 45 - 350 mm - Opening of the pressure bar: 100 mm - Width of the pressure bar: 350 mm - Parallel stop with digital display: 25 - 1000 mm - Cutting angle approx.: 45 Veneer shears Manufacturer: Monguzzi, Carugate Type: AFD-35/2600 Year of manufacture: 2006 For clean, perfectly parallel and right-angled joining of veneer bundles in a single operation. Thanks to its high productivity, gentle handling of the raw material (no manual turning) and its precisely parallel cut, this guillotine is the perfect machine for preparing veneer strips for splicing. Production Up to 3 bundles/min Technical data Max. cutting length: 2600 mm Cutting widths: 45 - 350 mm Opening of the pressure bar: 100 mm Width of the pressure bar: 350 mm Parallel stop with digital display: 25 - 1000 mm Cutting angle approx.: 45 Features Bdjdszuzpmopfx Aa Ieh - Solid, robust construction with generously sized pressure bar and cutting table to accommodate the high clamping and shearing forces - Unique system with a fixed, solid cutting table and a movable pressure bar - Laser lights for precise visual identification of the cutting lines - High-quality hydraulic system with a large oil tank - Electrically driven parallel stop with quick adjustment - Industrial computer based on Windows, widescreen monitor and keyboard - Various operating modes and storable program sequences - Extensive recording of production data - Central lubrication unit Movable laser lines For optimizing veneer yield. The manually operated laser line for the position of the front knife can be quickly adjusted. The veneer width is transmitted to the computer at the touch of a button. The cutting process then starts automatically. Note: The technical data and descriptions are a transcript of the order confirmation from that time. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2012, stations 20 0 max. speed sets 4200 /h max. paper size 36 x 50 cm Bdsdpszgxbkefx Aa Ioh 1 tower DC-10/60 Pro built 2012 à 10 Stationen 1 tower DC-10/60 built 2002 incl. DBM 400 fold and stitiching unit (Hohner stitching heads) incl. DBM 400T Trimmer incl. DBM-400 LS (Long Stacker) optional DBM- 2KT (3-knife trimmer)

Condition: used, functionality: fully functional, TORSION BAR PRESS BRAKE, 3000x80T ROMEA, used, overhauled and brought up to standard, NOT “CE”. WORKS ONLY AT SLOW SPEED, FOR STANDARD COMPLIANT USE WITHOUT PHOTOCELLS, UPPER KNIFE AND LOWER PRISM WITH 5 GROOVES, RECTIFIED WITH MANUALLY ADJUSTABLE REAR REGISTERS AND TECHNICAL CERTIFICATION FOR COMPLIANCE. Bedpezhkqmefx Aa Isdh

Condition: used, Dough band system WP Kemper Quadro Relax S Modularly designed, high-performance roll production line for processing roll doughs with long pre-fermentation times. Head machine with dough strand former, 2 x flour dispenser, RelaxS roller system, SoftCut slicing knife, rounding station, and extendable and cleanable EasyPull conveyor belt. Bdjdpfx Aaez A R Sqo Ioh Products: square small baked goods (TA: max. 170) Weight range: 25 to 1000 g / piece (depending on the knife roller) Capacity: max. 800 kg dough/h Hourly output: max. 10,000 pieces/h (with 5-row operation) Working width: 800 mm Discharge device with extraction length max. 2000 mm Touch screen control