Used Haas Sl 40 for sale (231)

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VM-6 HE Mold Maker was manufactured in 2008. It features an impressive X-axis travel of approximately 1,626 mm, Y-axis travel of approximately 813 mm, and Z-axis travel of approximately 762 mm. The machine includes a 24-position tool changer and has high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 HE vertical machining centre we have for sale. Contact us for further details. • Through-Spindle Coolant (TSC): Yes • High Speed Machining: Yes • Electrical supply: 360–480 V, 3-phase, 50–60 Hz • Full load: 40 A • Largest load: 70 A • Spindle history: Complete spindle replaced with a new unit in May 2021; control counters were reset afterward (do not reflect total lifetime hours) Gbedpfx Aozy Izyoikew • Current counters since spindle replacement: • Power On Time: 5,204 h • Cycle Start Time: 3,525 h • Feed Cutting Time: 427 h • M30 Counter: 121,779 • Current machine condition: Not operational due to a defective main spindle motor • Spindle motor: Yaskawa Electric, Type UAKB-31BHA12, AC Spindle Motor Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a 12000 rpm spindle, a 40+1 tool changer, through-spindle coolant at 21 bar, and a conveyor. High-speed machining capabilities are enhanced with programmable coolant and Dynamic Work Offsets/Tool Center Point Control. It also includes Renishaw probes and a robot interface. If you are looking to get high-quality milling capabilities consider the HAAS UMC-750 machine we have for sale. Contact us for more information about this machine. • Tool changer: 40+1 tools (CT as provided) • Through‑spindle coolant (TSC) 21 bar • Air through spindle Gsdex Imttspfx Aikebw • High‑Speed Machining • Programmable coolant nozzle (P‑Cool) • DWO/TCPC • Auto Door • Side window • Top roof/enclosed top Additional equipment • Chip conveyor • Renishaw probes (probing system) • Robot interface

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, 500mm x 500mm table, max table weight 300kg, table tilt +110°, -35°, 22.4kW, 15000rpm, Gbodjz Sqqmopfx Aikew BT40, 40 station tool changer, Through spindle coolant, Tool Setter, Programmable coolant,

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50 XTHE was manufactured in 2010. It features an impressive X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,575 × 584 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50 XTHE vertical machining centre we have for sale. Contact us for further details. Gbedpfx Ao Ahxywjiksw - Supply Voltage: 360–480 V - Power Supply: 3-Phase - Mains Frequency: 50/60 Hz - Full Load Current: 40 A - Largest Load Current: 70 A - Circuit Diagram: 96 - Circuit Diagram Number: 0284 - Table Dimensions: 1,575 × 584 mm - Maximum Table Load: 1,814 kg - Tool Taper: SK 50 / BT 50 (depending on configuration) - Tool Changer: 30+1 tool stations - Rapid Feed Rate X/Y/Z: 18 m/min - Machine Weight: approx. 7,371 kg - Transport Dimensions (L × W × H): approx. 4,270 × 2,600 × 3,180 mm

Condition: used, HAAS VF-2SS is a Vertical machining center engineered for precision, high accuracy and reliable production performance. Table 914×356 mm with 3 T-slots (16 mm), travels X762 × Y406 × Z508 mm, table load max 680 kg; 24-position tool changer, tool Ø max 64 mm (127 mm with free adjacent pockets), tool length 279 mm, max tool weight 5.4 kg. Spindle nose BT40, up to 12,000 rpm; spindle motor 22.4 kW; work feed 21.2 m/min, rapid traverse 35.6 m/min; tool change 1.8 s, average chip-to-chip 2.4 s. Voltage 3x 400 V 50 Hz, air 5.5 bar; machine weight ≈3800 kg, dimensions 3150×2600×2700 mm. Accessories: 4th-axis table (B), set of toolholders, set of collets, coolant system 208 l, 3D measuring feeler REGO‑FIX. Suitable for achieving tight tolerances in automotive, aerospace, medical, watchmaking and machine tool sectors. Gbsdpfxj Ai Sbij Aiksw

Condition: good (used), Year of construction: 2011, Haas VF-3YT/50 vertical machining center, manufactured in 2011. Gsdpfx Aj Ahxqysiksbw

Condition: used, Year of construction: 2005, type of input current: three-phase, We offer a used Haas SMINIMILL HE CNC lathe, built in 2005. Manufacturer: Haas Automation, Inc. Model: SMINIMILL HE Serial number: 41201 Date of manufacture: 4/05 Voltage: 360–480 V Phase: 3 Frequency: 50/60 Hz Full-load current: 20 A Largest load current: 35 A Short-circuit interrupting capacity: 10000 A Godpo Agcwhjfx Aikjbw Wiring diagram: 96 / 8100 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total height: 2,290 mm, total length: 5,760 mm, total width: 4,440 mm, overall weight: 5,760 kg, HAAS ST-35 CNC LATHE – ONLY 50 HOURS – LIKE NEW – FULLY EQUIPPED HAAS ST-35 CNC Turning Center in outstanding condition with only 50 operating hours. The machine was purchased for a specific production project and has seen very limited use. It is in excellent mechanical and cosmetic condition and is ready for immediate production. Main Features Programmable Tailstock Chip Conveyor High Pressure Coolant Automatic Tool Presetter (ATP) Haas Next Generation Control (NGC) Ethernet & USB Connectivity Touch Screen Control Gbsdpfjzrhinox Aikjw Work Light Complete documentation The machine has always been operated in a clean industrial environment and maintained according to Haas recommendations. The machine can be inspected under power in Portugal. Additional photos, videos and technical information are available upon request. Price: €60,000 + VAT

Condition: used, Year of construction: 2015, functionality: fully functional, Počet os: 3 Pojezd osy X: 1270 mm Pojezd osy Y: 508 mm Godpfxs Ad Iabs Aiksbw Pojezd osy Z: 635 mm Technická specifikace Výkon vřetena: 22.4 kW Rychlost vřetena: 12000 RPM

Condition: excellent (used), Year of construction: 2005, Haas MDC 500 Vertical pallet chance machining center BT 40 tooling side mount 24 stations. TRAVELS X 500MM Y350MM Z500MM Table size 500x320 weight 6.5 t Programable coolant Gbjdpfx Aenn Dwwsikjw This machine is a great workhorse usually twice as quick as a similar vertical machine due to pallet change and a lot nicer to work on than the verticals. we use 20 Haas machines an can help with tooling, programing if required.

Condition: good (used), Year of construction: 2012, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 1097151, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: Haas CNC Control, total height: 6,350 mm, spindle speed (max.): 12,000 rpm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HAAS VM-3 – 2012 We are selling this machine due to purchasing newer, more expensive equipment and limited shop space. The machine is in good working condition and currently under power / in use. All standard specifications and dimensions are available online. If you have specific questions, feel free to contact us. The machine is equipped with the option to connect a 4th or 5th axis rotary table. Please note that rotary units are not included in the sale, but the machine is prepared for future expansion. Before shipping, the machine will be professionally cleaned by a specialized company. Tools, holders, chucks, and other accessories used with the machine are included. Transportation is the responsibility of the buyer. Gbjdoym N Ehjpfx Aikew Please contact me via email or WhatsApp for more information.

Condition: used, Year of construction: 2010, functionality: fully functional, grinding spindle speed: 8,000 rpm, grinding spindle motor power: 12 W, Machine in functional condition and can be under power and tested. Gedpez Ea Hpsfx Aikobw

Condition: used, Year of construction: 2006, type of input current: three-phase, Equipment: chip conveyor, We offer a used Haas VF-2BHE vertical machining center, manufactured in 2006. Manufacturer: Haas Model: VF-2BHE Machine type: Vertical machining center Serial number: 49679 Date of manufacture: 06/06 Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full-load current: 20 A Largest load: 35 A Short-circuit interrupting capacity: 10000 A Wiring diagram: 96 / 8100 Enclosure rating: NEMA Type 1 Gbodpfx Aie Agcv Sjkow If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. The machine is powered and ready for inspection. Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) RJH type: C Gbedjz R Rf Aepfx Aikow Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, HAAS VF-3SS vertical machining center Gbodpfx Aio Af Ncwskow Year: 2017 Technical details: X-axis travel 1016 mm, Y-axis travel 508 mm, Z-axis travel 635 mm, Table size of 1219 x 457 mm, Spindle 12000 rpm ATC 24 positions Spindle type SK40 Accessories/options: Renishaw touch probe Renishaw TS27 tool measuring Swarf conveyor Through spindle coolant Software options Under power ihnspection is available at anytime!

Condition: used, Year of construction: 2020, workpiece weight (max.): 5 kg, table width: 267 mm, table length: 1,466 mm, table load: 159 kg, tool diameter: 89 mm, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Gsdjxqc H Sspfx Aikobw Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg - Maximum feed rates on all three axes: 10.2m/min.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 3, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a vertical machining center with a 12000 rpm spindle, BT40 tooling, and a 40 tool holder capacity. Additional highlights include coolant through spindle, a probe, toolsetter, and high-speed machining capabilities. Consider the opportunity to buy this HAAS UMC-750 vertical machining center. Contact us for more information about this machine. • Through-spindle coolant (water and air), 21 bar Gedex Ixh Njpfx Aikjbw • High-speed machining option • ATC capacity: 40 tools • Workpiece probe • Tool setter • Prepared for side automation (PP) Technical Specification Taper Size BT 40

Condition: excellent (used), HAAS TR310 TRUNNION TABLE EXELENT CONDITION TESTED CAN BE SHOWN WORKING Gbodenp Iyhopfx Aiksw

Condition: excellent (used), Year of construction: 2013, Vertical machining center, Haas VM-3, year 2013. Gbjde Adptcopfx Aikew

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Gbsdpjypv T Rjfx Aiksw Weight: 20,800 kg

Condition: excellent (used), Year of construction: 2010, Excellent condition can be demonstrated if required we also have a video of it running we have also got a tailstock if required Gjdpjq Rcilefx Aikjbw

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5SS was manufactured in 2016. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and a 24-position tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5SS vertical machining centre we have for sale. Contact us for further details. • T-slots: 7 • Max spindle torque: 122 Nm @ 2000 rpm • Rapid feed: 30 m/min • Tool magazine: 24 positions Technical Specification Taper Size ISO 40 Gedpfx Aijypb A Deksbw

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions Gsdpfex D Irmjx Aikobw • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Condition: excellent (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, HAAS control with LCD screen and USB interface Table dimensions: 1219 x 457 mm Max. table load: 1588 kg T-slots in table: 16 x 80 x 5 mm Gedpfjz R Altox Aikebw X-axis: 1016 mm Y-axis: 508 mm Z-axis: 635 mm Distance from spindle nose to machine table: 107 - 742 mm Spindle speed: 8100 rpm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer: 20-fold (or 20-station) Weight: 5320 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Equipment, Accessories - Coolant system - Chip auger - RENISHAW zero-point probing system with OMP60 probe - RENISHAW tool setter (not mounted) - Machine feet - Documentation The machine has been used very little and is in very good condition. It is still under power in Hungary. First owner. It was purchased as new in Hungary and has not run long hours.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 7,500 rpm, Equipment: chip conveyor, Longitudinal travel X: 508 mm Cross travel Y: 400 mm Vertical travel Z: 508 mm CNC type: Haas Table length: 600 mm Table width: 355 mm Max. table load: 1350 kg Tool magazine: 20 positions Spindle taper: ISO 40 Max. spindle speed: 7500 rpm Spindle motor power: 8.3 kW Gedpfsxq D Ecex Aiksbw Dimensions (L x W x H): 2200.0 × 2000.0 × 2300.0 mm Weight: 3190 kg