Used Grundfos Feed Pump for sale (66)

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Grundfos motor 0.55 kW -Flow volume: 3m³/h -Container with level indicator and magnetic switch -Dimensions total: 550/530/H600 mm -Weight: 43.4 kg Hjdpfewupr Sjx Ac Tot

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump Hjdecxq Atepfx Ac Tot -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS -Quantity: 1 available -Dimensions: 380/225/H565 mm -Weight: 36 kg

Condition: used, Centrifugal pump, high pressure pump, water pump -Max. Delivery rate: 2.0 m³/h -Dimensions: 360/140/H340 mm Hodedz Drpepfx Ac Tet -Weight: 11 kg

Condition: new, Grundfos CM3-2 A-R-I-V-AQQV centrifugal pump with MG71A-F-B-CMS1B pump motor, serial number: 2246, unused, 100% functional, scope of delivery as shown in the photos. Hodpfx Acjzg Sbwj Tst

Condition: new, Grundfos CM3-4 A-R-G-V-AQQV F-A-A-N centrifugal pump with MG71A-F-B-CMS1B pump motor, serial number: 0839, unused, 100% functional, scope of delivery as shown in the photos. Hodpfx Ajzg Sb Dsc Tet

Condition: as good as new (ex-display), Grundfos CRNE1-9 Vertical multistage pump Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade stainless steel, see plate for full spec, 2 in stock Hsdpovw Sqdsfx Ac Tjt

Condition: ready for operation (used), Grundfos MG 112 MS 2-28 FT 136-C three-phase motor SN 1100029148, used, minor signs of wear, 100% functional, scope of delivery as per photos Hedpfx Asqyq Nqsc Tot

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Hedpfxszn N T Te Ac Tjt Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Hedpfx Acozn N Aue Tet Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3151, Stainless Steel Heated Filtration System for Machining Center Capacity: 28 l Max. Operating Pressure: 16 bar Max. Operating Temperature: 95°C Grundfos (Pump): Type: MTR15-14/12A-W-A-HUUV n: 2924 rpm Hz: 50 kW: 11 Q: 17 m3/h Hmax: 169 m Grundfos (Motor): Type: MG160MB2-42FF300-H3 Hjdpfxowtga Rs Ac Tjt The Wolftechnik stainless steel filtration system, custom designed for the machining center WTBF85-F50-SS-TTV-GD-PN16, offers a high-quality solution for filtration in demanding manufacturing processes. Its heating capability ensures continuous operation even at low temperatures, preventing disruptions in production. With a high-performance Grundfos pump and a reliable motor, the system provides efficient flow control and continuous filtration.

Year of construction: 2023, condition: used, Pump speed 2.924 U/min Nominal delivery flow 21 m³/h Rated head 95,1 m Capacity 11 kw In our assessment, the pumps are in good used condition. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Hsdpjzbvguofx Ac Tst Prior sale is reserved.

Condition: used, Year of construction: 2015, machine/vehicle number: B96628619P11545, volume flow: 90 m³/h, operating pressure: 25 bar, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,900 rpm, protection type (IP code): IP55, Used pump from a well-maintained system. Hedszb Ib Dspfx Ac Tet

Condition: used, machine/vehicle number: 98362357, power: 2.2 kW (2.99 HP), input voltage: 500 V, input frequency: 60 Hz, input current: 4 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 4,000 rpm, protection type (IP code): IP55, Pump from a well-maintained installation, with few operating hours. Hjdpfszb E Axox Ac Tjt

Condition: used, Q 33.0 m³/h Hjdpeikwapefx Ac Tst P 15,0 kW max. 20 bar max. 110 C° H 90.0 m Nr. 4932869340 232 kg

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Hodpetp A Shefx Ac Tot Specifications: DN50 flanges 345mm between flanges Q = 35.1m3/h H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well.

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Hodpfxsyubcne Ac Tst Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: excellent (used), Manufacturer: Grundfos Type: NB80-250/220 A-F-A-BAQE Hodjncd A Nepfx Ac Tot Speed for pump data: 2940 rpm Rated flow: 73.1 m³/h Rated head: 57.6 m Actual impeller diameter: 222 mm Impeller nom: 250 mm Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 65 Pump outlet: DN 50 Pressure rating: PN 16 Net weight: 191 kg Gross weight: 216 kg

Condition: good (used), volume flow: 85 m³/h, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, Grundfos TPD pumps are single-stage, tightly connected in-line centrifugal two-head pumps, with mechanical shaft seal and primarily for applications such as heating / cooling / district power. Hodpfxsg I Utpo Ac Tot Type: TPD 80-330 / 2 A-F-A-BAQE Technical pump speed: 2930 rpm Nominal flow: 85.6 m³ / h Nominal lifting height: 25.9 m Maximum lifting height: 33 m Actual impeller diameter: 157 mm Materials Pump housing: Cast iron Impeller: Cast iron Material code: A Installation Ambient temperature range: -30 .. 60 ° C Maximum operating pressure: 16 bar Max. Pressure at the specified temperature: 16 bar / 140 ° C Connection size: DN 80 Pressure value for connection: PN 16 Port-to-port length: 440 mm Flange size for motor: FF300 Pump Transported liquid temperature range: 0 .. 120 ° C Density: 998.2 kg / m³ Electrical data Engine: Rated power - P2: 11 kW Mains frequency: 50 Hz Rated voltage: 3 x 380-415D / 660-690Y V Rated current: 12.0-11.8 A Starting current: 660-780% Rated speed: 2930 rpm Number of poles: 2 Housing classification (IEC 34-5): 55 Powder / Spray Insulation class (IEC 85): F Motor protection PTC Net weight: 303 kg Gross weight: 328 kg Purchase and purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Hedpfohy Nx Eox Ac Tjt Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: excellent (used), functionality: fully functional, volume flow: 163 m³/h, input frequency: 50 Hz, NB 80-160/147-127 A-F2-A-E-BAQE Non-self-priming, single-stage centrifugal spiral pump Pumped liquid: water Liquid temperature range: 0 .. 120 °C Density: 998.2 kg/m³ Technical: Speed: 2940 rpm Nominal volume flow: 163 m³/h Nominal head height: 17.1 m Actual diameter of the impeller: 147-127 mm Nominal diameter of the impeller: 160 mm Primary shaft seal: BAQE Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 100 Pump outlet: DN 80 Pressure limit: PN 16 Nominal power 11 kW Mains frequency: 50 Hz Hjdpfx Acjrp Ef Ej Tst Nominal voltage: 380V 3 phases Nominal current: 20.6 weight: 162 kg ​

Condition: used, functionality: unexamined, machine/vehicle number: MTRE 15-9/5 | 10-10/10 | 5-10/10, Used Grundfos MGE112MC2 Centrifugal Water Pumps Manufacturer: Grundfos Various configurations: Hedpfx Acexphqts Tet Pump MTRE 15-9/5 | Controller MGE112MC2 Pump MTRE 10-10/10 | Controller MGE132SD2 Pump MTRE 10-10/10 | Controller MGE112SB2 Pump MTRE 5-10/10 | Controller MGE1100LC2 Weight: varies from 42 to 74 kg. Power: ranges from 4.0 to 7.5 kW Voltage: 50/60 Hz, 380-400 Volt.

Condition: used, Item: D-3309-Grundfos pump Grundfos Centrifugal Pump – Type CP3-60 Used high-quality Grundfos centrifugal pump, made in Denmark. Compact, reliable unit suitable for industrial, food industry, and CIP applications. Hjdpfxsxt Itvj Ac Tjt Technical details: Manufacturer: Grundfos (Denmark) Type: CP3-60 Model: B91-25756 Speed: 2900 rpm (50 Hz) Capacity: approx. 3 m³/h Head: approx. 52 m Power: approx. 1.2–1.4 kW Material: Stainless steel (depending on configuration) Condition: Used, in good working order Applications: Ideal for CIP return, clean water, cooling circuits, filtration systems, or other industrial processes that require stable pressure and moderate flow rates. Location: Denmark Price: On request

Condition: used, MG160MB2-42FF300-H3, 160BB, Grundfos, 3-phase AC standard motor Model: MG160MB2-42FF300-H3 Hodpfeutan Esx Ac Tjt Type: 160BB Condition: Used

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Design: Vertical Hodowbfigjpfx Ac Tet Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Grundfos TPED 50-160 / 2-S AFA-BAQE APPLICATION AREAS - Heating systems - Local hot water supply systems - cooling and air conditioning systems FEATURES AND ADVANTAGES - Low power consumption - Correction according to the existing working conditions - Easy to install Technical data: Frequency of rotation 2900 rpm Nominal supply 17 m 3 / h Nominal head 12 m Max hydrostatic head 160 dm Shaft seal BAQE liquids: Working fluid water Fluid temperature range 0 ... 120 ° C temperament. Liquids 20 ° C density 998,2 kg / m 3 materials: Pump housing cast iron EN-JL1040 Hedpfjfuappjx Ac Tst ASTM A48-40 B Impeller cast iron EN-JL1030 ASTM A48-30 B Electrical data: Motor type 80B Number of poles 2 Nominal power - P2 2 x 1.1 kW Industrial frequency 50 Hz Nominal voltage 3 x 380-500 V Rated current 2.15-1.80 A Cos is a force characteristic 0.91-0.82 Nominal speed 360-4000 rpm Energy efficiency 88.5% Protection class (IEC 34-5) IP55 Insulation class (IEC 85) F Motor protection Yes. Engine number 98362352 assembly: Maximum ambient temperature 50 ° C Max. working pressure 16 bar Max. Pressure at a given temperature 16 bar / 120 ° C Standard flange DIN Connection code F Pipe connection DN 50 Permissible pressure PN 16 Mounting length 340 mm mm Motor flange size FF165 Net weight 95 kg