Used Grinding Technology for sale (29,400)

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 10 Kg Nledpsupxdqjfx Akish dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, width of the strips 75 mm Njdpfx Aoupxg Ejkijlh band length 2000 mm band speed 30 m/sec total power requirement 3 kW weight of the machine ca. 70 t dimensions of the machine ca. 1,2 x 0,5 x 0,75 m Belt sander with - Contact disc: 600 x 75 mm

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad connected load 230 V Nlodpfx Asupxkwskieh weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, width of the strips 100 mm band length 1220 mm band speed 1140 m/min. 0,62 x 0,4 x 0,35 cm Nlsdpfoupxm Eex Akioh total power requirement 1,5 kW weight of the machine ca. 0,04 t dimensions 0,97 x 0,67 x 0,37 m This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Nedpfeug Ty Hox Akislh Weight:

Condition: like new (used), functionality: fully functional, grinding length: 650 mm, grinding width: 300 mm, grinding wheel diameter: 160 mm, overall weight: 2,550 kg, power: 4 kW (5.44 HP), Brand: CCP - STANKOIMPORT Model: 3E711B Dimensions to grind: 650x300mm (X, Y) - 320mm (Z) Magnet table surface: 630x200mm Permissible table weight: 150kg Distance spindle axis to table surface: 80 - 445mm Maximum stroke of the grinding head: 365mm Manual table travel: (700mm, 250mm) Table travel speed: 2 - 30 m/mm. Cross traverse speed: 0,01 - 1,5m/mm. Nljdpfeqy H Dpjx Akioh Vertical feed rate graduation value: 0,002mm Vertical micro. graduation value: 0,0005mm Transversal feed graduation value: 0,5mm Micro. vertical feed graduation value: 0,001mm Transverse displacement one revolution of the nonius: 5mm Vertical displacement one turn of the vernier: 0.20mm Automatic table traverse feed longitudinal course: 0,2 - 30mm Automatic feed rate for grinding head: 0,002 - 0,08mm Grinding wheel dimensions: 250x76x40mm Minimum grinding wheel diameter: 160mm Spindle motor: 4kw Weight: 2550 kg.

Condition: new, width of the strips 150 mm band length 1220 mm dimensions of grinding wheel 225 mm work table: 150 x 400 mm Table tiltable up to 90 Grad Nlodpsfhk T Hsfx Akioh table surface area 150 x 130 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 35 Kg dimensions of the machine ca. 650 x 360 x 400 mm

Condition: good (used), Year of construction: 1989, piece diametre 1500MM Njdpofl Aaqefx Akislh max coupling 914MM poids 15 tonnes

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm rake angle: +25° to -10 Njdpfofqicxex Akijlh Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg

Condition: good (used), Year of construction: 1992, overall weight: 2,500 kg, Geibel & Hotz FS 635 Surface Grinder Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed system (SA) Automatic lubrication Coolant tank X-axis travel: 650 mm Nljdjz Ibd Iepfx Akioh Y-axis travel: 525 mm Z-axis travel: 350 mm Table length: 600 mm Table width: 350 mm

Condition: ready for operation (used), functionality: fully functional, grinding length, max. 600 mm Table clamping surface 600 x 200 mm Magnet dimensions 500 x 200 mm Nljdsz Ayqxjpfx Akieh Maximum distance between table surface and center of the grinding spindle 495 mm Grinding wheel dimensions (D x b x d) 250 x 25 x 51 mm Grinding spindle drive 5.5 kW

Condition: excellent (used), Kellenberger 1000U cylindrical grinding machine with many accessories available at a low price. This machine is in very good condition and is fully functional. It was purchased as a completely overhauled unit in 2019. Price greatly reduced!!!!! Nlodpswkt Euofx Akieh

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned Nlodjy Erxvspfx Akish - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: used, Year of construction: 1986, Surface Grinding Machine MONOPRECIS 1DR - #2 Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1986 Nsdpfoz Iz Tvsx Akislh Axes X - Y - Z manual Magnetic chuck: manual / tilted Magnetic chuck dimensions: 255 x 130 mm Grinding wheel dimensions: Ø max 170 mm Voltage: 380 V Dimensions (L x W x H): 1300 x 1100 x 1600 mm Weight: approx 500 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, The machine comes from the current production line and has always been serviced by Tschudin. The feeding system and polishing machine are included. Nlodpsz Iihnofx Akioh

Condition: excellent (used), Year of construction: 1997, max. wheel diameter 820 mm gear width 300 mm max. module 8 min. module 0,5 clamping length 865 mm number of teeth 10 - 600 max.helical angle +/- 30 ° turning speeds 1100 - 2150 U/min grinding wheel diameter 280 - 400 mm grinding wheel width 84 /104 workpiece weight max. 300 kg weight of the machine ca. 11,5 t dimensions of the machine ca. 6,0 x 4,8 x 2,9 m Nlodpfez Hz Rljx Akieh including Reishauer AF Filter, flanges, wheels,...

Condition: used, Year of construction: 1981, functionality: fully functional, Surface Grinding Machine JONES & SHIPMAN 540 L Travel X: 406 mm Travel Y: 470 mm Travel Z: 168 mm Year of construction: 1981 Magnetic chuck dimensions: Length 355 mm x Width 150 mm Grinding wheel diameter: Ø 180 mm Nlodpez H Rzmefx Akieh Spindle motor: 2 speeds motor Motorised raising/lowering Equipped with: Lubricant tank Voltage: 220 V Tri Dimensions (L x W x H): 1300 x 1300 x 1900 mm Total width with lubricant tank: 2000 mm Weight: approx 1,2 T

Condition: used, functionality: fully functional, Year of construction: 2021, overall weight: 4,850 kg, Equipment: front power take-off, Manufacturer: Krone Model: Swadro TC 1250 Year of purchase: 2023 Used, with signs of wear, good condition Important information: A functional video can be sent upon request. Technical data according to the manufacturer: Four-rotor center-delivery rake Working width: 9,800 - 12,500 mm Swath width approx. 1,400 - 2,200 mm* Transport width approx. 2,990 mm Transport height: approx. 3,990 mm Weight approx. 4,850 kg (base machine) Rotor diameter: Front: 3,300 mm, rear: 2,960 mm Eleven tine arms in front, 13 tine arms in the rear Max. PTO speed 540 rpm Power requirement approx. 59 kW (80 hp) Required hydraulic connections: 1 x single-acting, 1 x double-acting Standard equipment: Mounting Two-point mounting bracket (Cat II) incl. pivoting suspension via ball joint and roller Two-leg support Drive train Rotor gearbox with maintenance-free grease filling, completely hardened KRONE Dura-Max cam track KRONE Easy-Line drive concept (front rotor pair rotates approx. 25% faster than the rear) Rotors individually protected by overload clutch PTO shaft, wide-angle joint on one side, 1 3/8", Z=6 Drive train with freewheel Rotors + rotor chassis Cardan rotor suspension incl. Krone Jet effect, mounting of the tine arms by means of maintenance-free ball bearings Four 10.5 mm trailing double tines per arm with a large coil diameter and "lift effect" Tines mounted to prevent loss around the tine arm Rotor height adjustment by hand crank incl. rotor height indicator Easy operation via hydraulic control unit, incl. follow-up control of the rotors Hydraulic relief of the front rotors, spring relief of the rear rotors Four-wheel rotor chassis incl. four trailing feeler wheels Rotor tires: 4 x 16x6.50-8 each Additional equipment: Warning signs and LED lighting Operation via pre-selection control box and tractor-side control valves additionally with: - Tires Vredestein Flotation 500/50 R 17 - Middle swath curtain (hydraulically pivoting) - Hydraulic single-rotor lift via pre-selection switch box (electric) Nedpfx Akjz Hvldjijlh (lifting of the front rotors) including paired lifting of the rotors + 1 single-acting hydraulic valve

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Nsdpfez H Iwfsx Akiolh Weight: approx 150 kg

Condition: used, Year of construction: 1990, Used straight-line glass edging machine, BOVONE Type ELB14, manufactured in 1999. Nedpfx Akez H I Hysislh

Condition: good (used), Year of construction: 2018, 0 40 kW air pressure 5 bar range L-W-H 2850 x 2470 x 2290 mm weight 7.000 kg External grinding, internal grinding, hard turning, measurement DVS UGrind – Incredibly impressive. – Efficient complete machining with grinding, turning and measuring tools on a single multifunctional head – Ideal for small to medium batch sizes of shafts and chuck components with a centre-to-centre distance of up to 1,200 mm – Machine bed made of natural granite for high dynamic and thermal rigidity – Consistently precise machining results thanks to a hydrostatically supported tailstock – Faster achievement of targetdimensions thanks to the intuitive DVS UCee operating system – Footprint of just 7 or 8.5 m²,including coolant system. --> BUDERUS, Type: U-Grind 800 Nlsdpfx Akoz Ek Absieh --> Control system: Bosch Rexroth MTX, IndraControl L45.1, 15" display --> Centre distance: 1.200 mm --> Max. outer diameter: 350 mm --> Max. workpiece weight between centres: 50 kg - Cross slide: X-axis - --> max. travel: 500 mm --> max. speed: 30 m/min --> resolution: 0.1 µm - Longitudinal slide: Z-axis - --> max. travel: 800 mm --> max. speed: 30 m/min --> Resolution: 0.0005 – 0.1 mm - Multifunction head (B-axis) - --> Swivel range: -45° to +225° --> Swivel time for 180°: Positioning accuracy: 0.0002° --> Repeatability: 1" --> Resolution: 0.001° - External machining - --> Max. machining length: 750 mm --> Peripheral speed: 50 corundum / 80 CBN --> Drive power: 15 kW --> Max. wheel dimensions: Ø400 x 50 x 152.4 mm - Internal machining - --> Max. bore diameter: 250 mm --> Max. bore depth: 235 mm --> Drive power S1: 1.8 – 7.5 --> Speed range: 30.000 to 50.000 rpm - Workpiece spindle C-axis - --> Max. speed: 1.500 rpm --> Drive power: 1.8 kW --> Drive torque: 90 Nm --> Measuring system resolution: 0.001° --> Roundness accuracy: 0.8 µm --> Positioning accuracy: 0.0001° - Tailstock - --> Quill stroke: 50/80 mm --> Quill diameter: 60 mm --> Bearing: hydrostatic --> Fine adjustment for cylindricity corrections: ±40 µm - 3-point centre - --> Clamping range: Ø20 – Ø150 mm --> Coarse adjustment: 40 µm --> Fine adjustment: 2 µm --> Feed rate: infinitely variable Highlights: > Complete machining in a single set-up. Turn whatever can be turned; grind whatever needs grinding. > Short set-up times, quick to programme – a machine that’s a pleasure to work with and gets the job done quickly. > Intuitive and ergonomic: good accessibility, crane loading, intuitive operation via touchscreen and ready-made programme modules. > Compact footprint thanks to integrated coolant treatment > Optional automation solutions: with our ULoad or a customised solution, for example from rbc robotics, the DVS UGrind can also operate fully automatically.

Condition: used, Universal external and internal cylindrical grinding machine CINCINNATI - MSO, Type R75 Serial No. 27782, Year of manufacture 1976 Center distance max. 805 mm Workpiece grinding length max. 800 mm Center height 130 mm Swinging diameter max. 250 mm Workpiece grinding diameter max. 250 mm Workpiece weight between centers max. 75 kg Workpiece weight in chuck max. 20 kg Workpiece spindle speed 50 - 390 rpm Tailstock internal taper MK 5 Tailstock short taper flange DIN 55027, Size 5, Ø 82 mm Tailstock spindle bore 38 mm Headstock internal taper MK 3 Grinding wheel diameter max. 300 mm Grinding wheel width max. 40 mm Grinding wheel peripheral speed 30 m/sec Tailstock quick traverse 50 mm Automatic tailstock feed 0.005 to 0.03 mm Manual feed 0.0025 mm Hydraulic table movement 0.05 - 6 m/min Motor power grinding spindle 3 kW Motor power workpiece spindle 0.75 kW Motor power internal grinding attachment 0.75 kW Power connection 380 Volt, 50 Hz - Feed and plunge system, manual or automatic feed - Grinding spindle swivels +/- 90° - Workpiece spindle swivels 0 to 90° - Table tilt for taper grinding up to 10° - Counter support / quill for the workpiece spindle with internal taper MK 3 - Internal grinding spindle missing, internal grinding attachment for swiveling - Coolant system adjacent - 1 diamond grinding wheel dresser - 3 grinding wheels with grinding wheel arbors - 1 grinding wheel without grinding wheel arbor - 1 grinding wheel puller - 1 reducing sleeve - 3 centering pins Nledpfsz Ek Siox Akieh - Several drive dogs - Operating manual with electrical diagram Space requirement L x W x H 2350 x 2000 x 1600 mm Weight 2500 kg Good condition

Condition: used, Mitsubishi NF400-CS Circuit Breaker – 400 A For sale is a used Mitsubishi Electric NF400-CS circuit breaker. Manufacturer: Mitsubishi Electric Type: NF400-CS Rated current: 400 A Njdpfx Akjz Euywoislh 3-pole Voltage: 600 V AC Condition: Used Removed from a fully operational machine Fully functional up to removal Sold as pictured Signs of normal wear from use

Condition: good (used), Year of construction: 1988, grinding diameter 360 mm grinding length 1000 mm centre height 180 mm grinding wheel diameter 500 x203,2 x 50-100 mm total power requirement 12 KvA weight of the machine ca. 4,7 t dimensions of the machine ca. 3,3 x2,0 x 1,8 m - Includes belt filters Nsdpfx Akszu A Sijielh - Includes grinding wheels

Condition: used, Year of construction: 2018, total length: 2,070 mm, lifting height: 4,560 mm, fork length: 1,150 mm, load capacity: 2,000 kg, - Antrieb Elektro - Bedienung: Geh/Stand - Nenntragkraft: 2000 kg - Lastschwerpunktabstand: 600 mm - Lastabstand: 724/646 mm - Achslast mit Last antriebsseitig/lastseitig: 1213/2295 lg - Achslast ohne Last antriebsseitig/lastseitig: 1096/412 kg - Bereifung: Polyurethan - Anzahl Räder (x = angetrieben) antriebsseitig/lastseitig 1x + 1/2 (1x + 1/4) - Spurweite antriebsseitig/lastseitig 534/370 mm Nodpeztgbxofx Akiolh - Arbeitsgangbreite bei Palette 800 x 1200 längs 2503/2892 mm - Wenderadius 1620/2009 mm - Fahrgeschwindigkeit mit/ohne Last km/h: 4,0/4,0 6,0/6,0 8,0/10,0 - Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 - Senkgeschwindigkeit mit/ohne Last m/s 0,31/0,31 - Max. Steigfähigkeit mit/ohne Last 8,0/23,0 % - Betriebsbremse Elektromagnetisch - Art der Fahrsteuerung AC-Steuerung - Schalldruckpegel (Fahrerohr) dB(A) ≤66 - Anzeige- und Bedieneinheit mit Farbdisplay zur Wahl der Fahrprogramme - Pneumatisch gedämpfte klappbare Standplattform - Integrierte Ablagemöglichkeiten - 2 Tonnen Tragfähigkeit mit Initialhub bei nicht genutztem Masthub - Griffoptimierte Deichsel für Links- und Rechtshänder - Zweistufen-Einstellmöglichkeit für besonders feinfühliges Heben und Senken - Energiesparprogramm Blue-Q - Leistungsstarker Drehstrom-Fahrmotor für sehr geringe Wartungskosten - Elektrische Lenkung: Drehstrom-Lenkmotor (AC) für besonders ermüdungsfreies Arbeiten - Proportionalventiltechnik für besonders feinfühlige Bewegungen - Voll gekapselte, schmutz- und staubunempfindliche Komponenten - Zugriffsberechtigung STILL Schlüssel - Lastschutzgitter - Batterieraum für Batterie bis 250 Ah für Batteriewechsel mittels Kran