Used Grinding Station for sale (9,051)

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m Nwodpob Tmrvefx Ac Asl 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements Nwjdpfx Aedy Hqvjc Ajl

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor Nwsdpfodzc Rfex Ac Ajl 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: reconditioned (used),

Condition: new, Eurotec Innovation TV45 – Trough Vibrator / Vibratory Finishing Machine (Made in Germany) The TV45 trough vibrator by Eurotec Innovation is a powerful and versatile vibratory finishing machine for professional surface finishing applications. The machine stands out due to its robust construction, high efficiency, and universal range of applications. Machine type: Trough Vibrator TV45 Shown: TV45 incl. sound enclosure and WS25 for part separation Manufacturer: Eurotec Innovation GmbH Thanks to the U-shaped working bowl, even larger and longer workpieces can be processed efficiently – while maintaining a compact design. The vibration motor mounted directly beneath the working bowl ensures highly efficient energy transfer and consistent finishing results. 🔧 Technical Data: Gross volume: approx. 115 liters Internal dimensions of working bowl: Length: 850 mm Width: 380 mm Height: 395 mm Rated speed: 1500 rpm Power supply: 400V – 16A – 50 Hz Njdpfx Acof Sqdtj Aowl Advantages: ✔ Compact and robust design ✔ High energy efficiency due to direct vibration drive ✔ Universally suitable for various workpieces ✔ Deflection edge to reduce part adhesion ✔ Low-maintenance vibration motor ✔ Optionally available with sound enclosure and separation systems 🏭 Applications: Deburring, smoothing, and polishing Descaling, derusting, and cleaning Edge rounding Surface finishing The TV45 is an economical and high-performance solution for companies looking for a flexible vibratory finishing system for a wide range of applications – from individual parts to small batch production. The machine shown in the images includes optional accessories. The listed price refers to the base machine (TV45). A suitable electrical control unit is required for operation. Additional variants and custom configurations are available upon request. From development to production, we provide all products from a single source – all “Made in Germany”. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Condition: new, Eurotec Innovation RA11 – Circular Vibrator / Vibratory Finishing Machine for Mass Production (Made in Germany) The RA11 circular vibrator by Eurotec Innovation is a powerful and versatile vibratory finishing machine designed for processing large quantities of parts. It is ideally suited for industrial applications where efficiency, process reliability, and consistent results are essential. Manufacturer: Eurotec Innovation GmbH Model: RA11 Numerous additional variants and custom configurations available upon request. 🔧 Technical Data: Gross volume: approx. 250 liters Effective volume: approx. 175 liters Channel width: 260 mm Power supply: 400V – 16A – 50 Hz Power consumption: approx. 2.5 kW Advantages: ✔ High grinding performance for mass production ✔ Uniform workpiece movement due to rising bowl bottom design ✔ Large screening area for efficient separation of parts and media ✔ Highly wear-resistant PU lining for long service life ✔ Low-maintenance and powerful vibration drive ✔ Modular design, expandable (e.g. magnetic separators, process water systems) 🏭 Applications: Deburring, edge rounding, and polishing Processing of bulk parts in large quantities Metal, plastic, and stainless steel processing Mass production in industrial environments The RA11 is the ideal solution for companies looking for a robust, high-performance, and cost-efficient vibratory finishing system for large production volumes. The evenly rising bowl bottom ensures reliable transport of workpieces to the integrated screening section, enabling continuous and automated processing. The generously sized screening area with tangential outlet ensures efficient separation of workpieces and media – optionally expandable with magnetic separators. An appropriate electrical control system is required to operate the machine. ----- Interested? Contact us – we will be happy to provide a non-binding offer. Nwedpfx Ashmp Dfsc Ael For more information and products, please visit our website. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Condition: new, Eurotec Innovation TV25-M – Mobile Vibratory Finishing Machine / Trough Vibrator (Made in Germany) The TV25-M by Eurotec Innovation is a compact, mobile all-in-one solution for professional vibratory finishing – ideal for deburring, grinding, and polishing a wide variety of workpieces. Thanks to its well-designed system layout, all necessary components are integrated in a space-saving manner on a mobile frame. This makes the machine flexible to use and ready for immediate operation. Type: TV25-M TROUGH VIBRATOR Nwjdpfshmp Dqex Ac Aol Manufacturer: Eurotec Innovation GmbH Gross volume: 50 liters Advantages: ✔ Mobile complete system – all components integrated on a movable frame ✔ Plug & Play – simply connect to 230V and start ✔ Integrated process water treatment (cascade system) ✔ Screening unit for automatic separation of workpieces and media ✔ Sound-insulated design for quiet operation ✔ Programmable control with timer & frequency adjustment The U-shaped trough design allows the processing of larger and longer workpieces while maintaining a compact footprint. ⚙️ Technical Data: Gross volume: approx. 50 liters Effective volume: approx. 36 liters Internal dimensions (working container): Length: 600 mm Width: approx. 275 mm Height: 325 mm Power supply: 230V Power consumption: approx. 0.5–1.0 kW 🏭 Applications: Deburring of metal and plastic parts Polishing and surface finishing Processing of individual parts up to small batch production Ideal for industry, workshops, and contract manufacturers Ideal for: Metal processing Deburring & polishing Workshops & production The TV25-M is the perfect solution for companies looking for a flexible, space-saving, and immediately ready-to-use vibratory finishing system – maximum efficiency with minimal space requirements. Additional variants and custom configurations available upon request. From development to production, we supply all products from a single source – all “Made in Germany”. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, WEINIG Rondamat 1000 CNC – High-precision knife grinding machine For sale is a used WEINIG Rondamat 1000 CNC, manufactured in 2016. The Rondamat 1000 CNC is a high-precision CNC knife grinding machine for fully automatic sharpening and manufacturing of profile knives, as well as for re-sharpening of straight planer knives and profile knives in the knife head. Technical data and equipment: * Manufacturer: WEINIG * Model: Rondamat 1000 CNC * Year of manufacture: 2016 * High-precision knife grinding machine * Automatic import of CNC programs from Moulder Master * Fully automatic sharpening and manufacturing of profile knives from a blank * Fully automatic re-sharpening of straight planer knives and profile knives in the knife head * Grinding of planer knives in the planer head with standard knife overhang possible Grinding unit: * Solid spindle carrier with precise guides * Roundness accuracy less than 0.005 mm * Motorized radial adjustment for different grinding wheel diameters * Back clearance angle fully automatically adjustable * Lateral clearance angle fully automatically adjustable * Grinding spindle with HSK mounting * HSK 50F * Grinding wheel diameter: 150–200 mm * Grinding wheel width (Borazon/Diamond): 2 / 3 / 4 / 10 mm * Grinding wheel bore: 60 mm * Grinding spindle drive: 1.5 kW (2 HP) * Grinding spindle speed: 1,500–3,000 rpm, frequency-controlled * Radial clearance angle grinding: 10–30° * Lateral clearance angle: 0–20° Automatic equipment: * Automatic grinding wheel measurement using a mechanical measuring process * Automatic compensation for grinding wheel wear * Automatic tool changer * Grinding wheel magazine with 3 magazine slots * Coolant system * Automatic coolant cleaning via a transport filter system * Coolant tank approx. 70 liters * Coolant additive: 5 liters * Coolant pump: 210 W * LED light for the machine interior Tool holder: * System "PowerLock 360" * Suitable for grinding PowerLock tools and large-sized boring tools * Max. tool weight: 80 kg * Tool holder with manual HSK quick-change system * Interchangeable receiving spindle for right and left tools * Max. tool width: 360 mm * Max. tool circle diameter: 300 mm * Min. tool circle diameter: 90 mm * PowerLock adapter for conventional tools, shank diameter 50 mm * Additional dividing head * Additional PowerLock adapter for conventional tools 40 mm or 50 mm Electrical data: * Operating voltage: 400 V * Voltage range: 380–420 V * Frequency: 50 Hz * Total connected power: approx. 3 kW (4 HP) Operation and control: * Operation from the front * Graphical user interface * Connection to WEINIG Moulder Master * Management of grinding wheels * Management of CNC programs * Setting of machining parameters such as feed speed, depth of cut, and feed cycles * Setting of tool parameters such as number of cutting edges, tool diameter, and blank material * Display of the current machining progress Nwjdpfx Aoz Eypdec Ael * CNC program generation in conjunction with Moulder Master

Condition: excellent (used), functionality: fully functional, spindle speed (max.): 2,640 rpm, travel distance X-axis: 457 mm, travel distance Y-axis: 171 mm, travel distance Z-axis: 504 mm, Equipment: CE marking, documentation/manual, Tangential Surface Grinder J.S 540 X Workable Surface Area: 457 x 152 mm Vertical Travel: 504 mm Nwsdpeyuwvksfx Ac Ajl Standard Grinding Wheel Size: 200x20x31.75 mm Grinding Wheel Speed: 2640 RPM Operation and Maintenance Manuals CE Declaration Tank with Paper Filtration

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Type: JA 500 CNC-C Njdpfx Acewp E Rgs Aswl Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Rotational speed: 4,200 rpm Machine weight: approx. 2,500 kg 9926ä

Condition: used, Year of construction: 1998, Surface grinding machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of manufacture: 1998 Table length: 400 mm Table width: 200 mm Maximum workpiece weight on the table: 150 kg Grinding wheel diameter: 225 mm Nodpfx Aowcym Ajc Ajwl Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions L x W x H: 1,800 x 1,200 x 2,250 mm 9926ä

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Longitudinal travel, X-axis (mm) 600 Grinding width (mm) 400 Max. grinding height (mm) 500 Clamping area (mm) 600 x 400 Grinding wheel (mm) 300 x 50 Power of grinding spindle motor (kW) 5.5 Manufacturer ELB Year of manufacture 2012 Control system ELB Comfort Type of control system CNC Total power requirement (kW) 23 kW Space requirement (mm) approx. 2,800 x 2,400 x 2,500 mm Weight (kg) approx. 4,000 kg Condition Good Nwedpfx Aezzll Ssc Asl

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Nwjdew U Nzrspfx Ac Ael

Condition: ready for operation (used), functionality: fully functional, grinding wheel diameter: 355 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 750 mm, travel distance Z-axis: 340 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Travel range, X-axis: 750 mm Travel range, Z-axis: 340 mm Table width: 600 mm Table depth: 300 mm Magnet width: 600 mm Magnet depth: 300 mm Nwedpezuw Dmsfx Ac Ael Max. grinding wheel diameter: 355 mm Max. spindle speed: 1,500 rpm MACHINE DETAILS Drive system: CNC Control system: Fanuc DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 2,300 x 2,400 mm Net weight: 2,500 kg Shipping packages: 3 units EQUIPMENT CE marking

Condition: used, Year of construction: 1991, grinding length 600 mm grinding width 375 mm Nwsdozycnnopfx Ac Ajl workpiece height 375 mm workpiece weight 300 kg table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m MICRO GRANIT has excellent properties for high-precision grinding machine construction. Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. - Table stroke: 100–250 mm. - Table speed: 40 m/min. - Switching: via cams, contactless. - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Number of filling heads: 3 Filling capacity: 25 cans/minute Hourly capacity: 63 cases/hour Nwsdpszzmfaofx Ac Aol Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, -Dimensions: 1100x650x865 mm -Tank size: 500 mm diameter, 150 mm depth -Serial number: C2171910002 -Manufacturing date: 10/2019 -Temperature: -30°C/-35°C -Voltage: 230V -Frequency: 50Hz -Ice production: 25 L/h Nsy Tdxew N Scbsugoda -Weight: 90 kg Nwodew N Scbopfx Ac Ael

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Manufacturer: STÖCKEL Nwjdpfoz Dkuujx Ac Asl Type: FX 60/30 SPS Year of manufacture: 2008 Grinding area: approx. 600 × 300 mm Magnetic chuck: approx. 600 × 250 mm Speed: 1900 rpm Grinding height: 400 mm Drive power: 9 kW Operating voltage: 400 V / 50 Hz Table load: 250 kg Control: PLC Weight: 3000 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 679, overall weight: 8,000 kg, Equipment: documentation/manual, Höfler Helix 400k gear grinding machine The HÖFLER Helix 400k is currently in operation at our customer's production facility and is fully ready for use. An inspection and machine demonstration under production conditions can be arranged by appointment. The machine has been regularly serviced and maintained by Buss-Maschinenservice for several years. As part of the maintenance work carried out to date, all pneumatic hoses have been replaced, and several servo drives and servomotors have been overhauled or replaced. The mechanics have been inspected, and any necessary repairs have been carried out. The machine is being sold due to the purchase of new equipment. If desired, we will handle the complete machine relocation – from professional dismantling and packaging to transport, installation, commissioning, and customer training at the new location. Nsdpfx Aoz Dqtwoc Aewl

Condition: good (used), Thread milling machine (?) possibly also suitable for other applications Stock number: 3138 Nsdpfx Ajz Ef Rgjc Aewl Manufacturer: Maschinenfabrik Ortlieb Esslingen Bed length: 400 mm Tailstock center height: 140 mm Cross slide travel: 220 mm Grinding wheels: 75 x 20 x 20 mm cup wheel Motor speed: 2,775 rpm, 0.175 kW Spindle motor: 0.16 hp (0.1 kW), 1,400 rpm Accessories/Equipment: 3-jaw chuck, various cam followers Condition: good Total weight: 230 kg Dimensions: 750 x 500 x 1,400 mm

Condition: good (used), Year of construction: 1990, machine/vehicle number: 4061359390114, Offer 26234 Hydraulic combination profile steel shear with hole punch Technical data: Njdpfx Ajz Df I Asc Aowl - Sheet metal and flat steel shear, blade length 200 mm - Cuts flat steel up to 150 x 15 mm - or up to 190 x 10 mm - Profile bar steel shear - Cuts: - Angle steel up to 100 x 10 mm - Round steel up to 32 mm - Square steel up to 30 mm - Notching device with three-sided notching tool - Hole punch - Punching force 500 kN - Stroke 10 to 28 mm - Outreach 155 mm - Punches holes in steel up to 27 mm diameter in 14 mm - or up to 31 mm diameter in 10 mm - Drive 400 V / 4 kW - Including: - Foot switch - Electrical contact stop - Various hole punches with dies - Space requirement approx. W 650 x H 1750 x D 960 mm - Weight approx. 850 kg

Condition: used, Year of construction: 1998, grinding length 600 mm grinding width 400 mm workpiece height 525 mm table surface area 960 x 400 mm dimensions of grinding wheel 350 mm 600 x 400 mm grinding spindle speed 3000 U/min table load capacity 1100 kp total power requirement 8,0 kW Nwsdpfszzd Thex Ac Aol weight of the machine ca. 2,1 t dimensions of the machine ca. 2,4 x 1,9 x 2,1 m Surface grinding machine - Magnetic chuck - Coolant system with filter

Condition: used, Year of construction: 2001, Seed station Kemper 800 mm Nodpfx Asz A Skuoc Aswl Year of manufacture: 2001 Condition: refurbished Suitable for integration into production lines with a working width of up to 800 mm Standalone machine with its own control cabinet Adjustable spreading rate Adjustable spreading duration Return conveyor for unused seed Extendable mesh belt Humidification and seeding can be switched off Pressure rollers at the inlet and outlet with adjustable pressure height Turning station after humidification Includes 1x spreading container and 1x extendable mesh belt

Condition: used, Year of construction: 2009, Seeding station with discharge system, BmTEC, 2-row configuration Year of manufacture: 2009 Nwsdpfx Acoz A Sgcs Aol Condition: refurbished Working width: 300 mm Infeed height: 820 mm Humidification belt with integrated water bath for humidifying the underside of the dough Immersion depth adjustable Tilting belt with adjustable tilting height for reliable turning of the dough pieces Sprinkling from above with adjustable sprinkling quantity Adjustable pressure roller for fixing the sprinkled material Automatic seed return Includes 2 spreading containers All belt speeds are adjustable Fast and slow discharge possible Automatic sheet feed Max. discharge length: 800 mm External dimensions (L x W x H): 330 x 130 x 220 cm

Condition: used, Year of construction: 2018, Lippelt 800 long roller station Year of manufacture: 2018 Working width: 800 mm Pressure roller at the infeed, adjustable in height and laterally Working plate, adjustable With timing roller on the transfer belt (pneumatic) Flour spreader with electrically adjustable flour quantity, including 2 containers Pressure roller at the outfeed, adjustable in height and laterally Belt speed adjustable Machine can operate in stand-alone mode. Nodpoz A Sdzsfx Ac Ajwl