Used Grinding Station for sale (9,051)

Condition: good (used), Hardly used Elektra-Beckum double bench grinder with stand and container, in good, fully functional condition. Nwjdpfxoz Egf Ej Ac Ael Shipping not possible Please do not send email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only possible by prior telephone arrangement! Subject to change, interim sale, and errors.

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Nodpfx Acjz Egfxe Aewl Subject to alterations, prior sale, and errors.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total height: 2,200 mm, compressed air connection: 6 bar, table load: 250 kg, control voltage: 24 V, grinding wheel diameter: 445 mm, overall weight: 1,000 kg, input frequency: 50 Hz, Equipment: documentation/manual, Fully refurbished Peter Wolters AC500 precision grinding machine. The machine has been completely rebuilt and is in like-new condition. Nwjdpfxoz Ei Tfj Ac Asl Equipped with a new control cabinet, new Siemens PLC, and Siemens HMI. 3.5 kW main drives with 296 RPM. Maximum process pressure of 250 daN with a new Festo valve manifold and new proportional valves. New Mahr measuring control system with automatic tool positioning and switching points for load stages. Speeds, process pressures, times, and dosing can be freely programmed via passwords. The machine has a recipe memory and Ixion remote maintenance. Process support for precision grinding functions. Documentation available in paper format. CE and EN60204-1 compliant. The machine is in stock and immediately available. Inspection under power and with compressed air is welcome.

Condition: used, Feed unit with 6 drum motors Nwsdpoq E Ipbsfx Ac Aol Round motor Motor roller Drum motor

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Cross feed 0.1 – 20 mm Cross travel 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding motor speeds 1450 / 2900 rpm Nedpfx Acsizka Ij Aswl Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent retraction • Electro-magnetic clamping table L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 grinding wheel with flange • Control panel • Lighting • Coolant system with band filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,600 h, controller model: Fanuc 32 C, control type: CNC control, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Njdpfxow I Tt Ss Ac Ajwl Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, Available from stock Max. Grinding width: 225 mm (incl. wheel) Max. Grinding length: 450 mm Max. Distance table to spindle center: 450 mm Max. Longitudinal movement of the table (hydr.): 500 mm Max. Max. longitudinal movement of the table (man.): 530 mm Automatic vertical infeed: 0.002 - 0.004 mm Automatic transversal infeed: 0.4 - 6 mm Max. Clamping surface of the table: 450 x 200 mm Max. Clamping surface of magnetic clamping plate: 450 x 200 mm Grinding wheel D x B x d: 203 x 12.7 x 31.75 mm Nwodpfsirwnvox Ac Asl Rapid traverse: 330 mm/min Grinding spindle speed: 2850 rpm grinding spindle drive: 1.5 kW hydraulic motor: 0.75 kW weight: 1300 kg dimensions W x D x H: 2100 x 1650 x 1900 mm Balancing mandrel Manual extractor with diamond Automatic vertical feed Electro-magnetic clamping plate Control panel on swivel arm Grinding wheel spindle on 4 high precision angular contact ball bearings Hardened guideways in all 3 axes with needle bearings Grinding wheel Grinding wheel flange Grinding wheel balancing scale Coolant system with aut. paper filter and magnetic separator Operating instructions in ENGLISH Machine and equipment according to CE regulations

Condition: good (used), Center height: 100 mm Distance between centers: 380 mm Grinding length: 380 mm Workpiece headstock: MK5 Tailstock: MK3 Grinding wheel size: max. 350 x 50 x 127 Space requirement of the machine: about 2'020 x 1'200 x 1'450 mm Nedpofg U A Nsfx Ac Ajwl Equipment: -with band filter

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm rake angle: +25° to -10 Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg Nwedpofqicxsfx Ac Aol

Year of construction: 1974, condition: excellent (used), Workpiece diameter max.: 150 mm workpiece length max.: 1100 mm center hole angle : 60 ° grinding spindle speed : 15'000 rpm Weight: approx. 460 kg dimensions W x D x H: approx. 700 x 800 x 1800 mm Accessories: see picture Nedef U Ev Ijpfx Ac Aewl

Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, maximum grinding length 800mm, grinding wheel size 290mm x 63mm bore. Nedpfxotudfdj Ac Aewl Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, table swivel +6/-3.5 degrees, workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. fitted with coolant.

Condition: good (used), table width: 150 mm, table length: 400 mm, type of input current: three-phase, Tangential grinding machine Brand: INGAR Model: RT-618-2A Nwedpfx Aez D Arrec Asl Grinding travel: 460x150mm X, Y axis: Automatic movement Z axis: Manual Drive: Hydraulic Manual Selter magnetic table: 400x150mm

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Nsdpfjwugh Dox Ac Aewl Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Condition: ready for operation (used), DAREX SP 2500 / Drill bit grinding machine incl. 3 inserts -CE marking -Clamping range (drill bits) 1.6 - 26 mm Njdpfx Acez Evgxe Aswl -Speed range 2850 / rpm -230 Volt version -Grinding wheels / CBN or diamond grinding wheels can be used -3 grinding inserts -Documentation Dimensions: L x W x H 0.4 x 0.4 x 0.3 meters / Weight 80 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2006, functionality: fully functional, 10 cup wheels vertical glass grinding machine min. glass size : 40 x 40 mm glass thikness : 2 - 30 mm speed : 0,35 - 5,4 m/min. Nwsdpfx Aozz Hiroc Ael machine dimensions : 7900 x 1200 x 2900 mm worki,g height from conveyor : 850 mm power : 30,5 Kw weight : 4100 kg

Condition: good (used), grinding wheel diameter: 300 mm, type of input current: three-phase, grinding wheel width: 40 mm, overall weight: 1,850 kg, rotational speed (max.): 400 rpm, External cylindrical grinding machine Brand: GER Model: RHL-450 Fagor dimension display Grinding wheel dimensions: 300x40mm Drive: Hydraulic Distance between centers: 450mm Center height: 130mm Maximum workpiece diameter: 250-255mm Workpiece spindle speeds: 55-400 rpm Motor: 3Hp Weight: 1850kg Nwodpsz Dv E Esfx Ac Aol

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support Nwedpezzyd Ajfx Ac Aol * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: used, Year of construction: 2008, Control Siemens Sinumerik 840 D x-axis 800 mm y-axis 600 mm Z-axis with 60 mm wide disc 460 mm Z-axis with 100 mm wide disc 410 mm dimensions of grinding wheel 300 x 50 x 127 mm Table surface sanded 800 x 400 mm Max. clamping surface 1.150 x 400 mm Distance from table to spindle center 700 mm table height over floor 1.000 mm Max. table load 800 kg Net machine weight ca. 4.500 kg Dimensions (W x D x H) ca. 3.500 x 3.00 x 2.400 mm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery Nwsdpfx Ajzzrhtoc Ajl only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: reconditioned (used), ELB Perfekt BD 10 CNC, year of manufacture 1995, grinding area 1000 x 550 mm, grinding wheel 400 x 100 mm, 7.5 kW spindle power, easy-to-use CNC control with automatic grinding cycle, roughing, finishing, lapping, deburring, planer mounted on the spindle housing with compensation; the machine has been professionally overhauled by us, the grinding spindle has been newly fitted with bearings, the guideways have been newly scraped, the machine meets the geometry of a new machine and is therefore immediately ready for use. Accessories: Electro-permanent magnetic chuck 1000 x 550 mm, coolant tank with paper filter automatic system; all functions have been tested, and the machine can be demonstrated while powered on. We will also gladly take care of the installation and training on site. Financing/leasing is no problem; we will be happy to provide you with an offer! Nedpfjz Eia Esx Ac Aewl

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 CNC grinding machine, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power with speed control, easy-to-use CNC control with automatic grinding cycle, roughing, finishing, lapping, and deburring. The machine features a surfacing head mounted on the spindle housing with compensation. The machine has been professionally overhauled by us, the grinding spindle has been fitted with new bearings, and the guide rails have been newly scraped. The machine meets the geometry of a new machine and is therefore immediately ready for use. Accessories: Electro-permanent magnetic chuck 800 x 400 mm, coolant tank with paper filter system, partial enclosure. All functions have been tested, and the machine can be demonstrated under power. We would also be happy to take care of the installation and training on site. Financing/leasing is no problem; we would be happy to provide you with an offer! Nwjdpfxorpz Evo Ac Aol

Condition: ready for operation (used), Contact grinding machine / LÖSER KS 360 / suitable for grinding pipes and round materials - Grinding range / diameter 3 - 70mm - Grinding length / endless - Belt speed 7.5 - 34 m/sec - Contact disc diameter 100-225mm - Grinding belt width 5 - 75mm - Grinding belt length 2500mm - Motor power 1.6 / 2.6 KW Nodpfsz Ehqpox Ac Aewl Dimensions: L x W x H 1.2 x 0.6 x 1.8 meters / Weight 350 kg Errors and omissions excepted.

Condition: used, Year of construction: 2011, workpiece weight (max.): 3,600 kg, overall weight: 3,600 kg, Equipment: documentation/manual, CNC Tangential Surface Grinder • Manufacturer: MECCANICHE LODI S.r.l. (Italy) • Model: RT 60.35 CNC • Year of commissioning: April 2011 (Purchased new from VFM Machines SA) • Location: Boécourt (JU), Switzerland • Condition: Very good overall condition, first owner. Sold with its original instruction manuals in French and complete technical documentation. Machine certified to comply with CE standards. 📊 Main Technical Specifications (VFM/Lodi Data): • Grinding length: 600 mm • Grinding width (with grinding wheel width): 400 mm • Grinding height from the table: 400 mm • Maximum longitudinal travel: 750 mm • Maximum transverse travel: 350 mm • Grinding wheel dimensions: 400 x 50 x 127 mm bore • Table travel speed: 1 to 35 m/min (continuously adjustable, driven by two hydraulic cylinders) • Spindle speed: 1,450 rpm (7.5 kW / 10 HP motor) • Net machine weight (machine only): Approx. 3,600 kg ⚙️ Design & Drive System: • High-rigidity cast iron frame and column, cast iron table with honeycomb structure. • Longitudinal guidance by linear slides (centralized automatic lubrication). • Transverse and vertical guidance by high-precision needle rails. • Transverse and vertical movements driven by precision ball screws and high-performance Yaskawa brushless motors. • Integrated Yaskawa frequency converter for continuous speed adjustment and spindle braking. • Micrometric movements via electronic handwheel. • Air / Oil heat exchanger for the hydraulic unit. 💻 Automation & CNC Cycles: • Electrical cabinet with original CNC control system managing the display of vertical/transverse dimensions. • Complete automatic cycles: programming and management of roughing, finishing, spark machining, and feed rates (minimum step of 0.001 mm). Nwsdpez Eru Ejfx Ac Aol • Automatic dressing device on the grinding wheel head, with integrated automatic compensation for grinding wheel wear. ❌ Peripherals NOT included: • Machine sold WITHOUT its magnetic chuck. A quote is currently being prepared for a new chuck at CHF 3,500. • Machine sold WITHOUT its lubrication/sedimentation tank. (Ideal for a workshop wishing to integrate the machine into its own coolant filtration system or install a specific new magnetic chuck). 💰 Sales Conditions: • Asking price: CHF 15,000 (net) (Price negotiable at the machine) • Type of transaction: Professional sale (Swiss VAT will be added if applicable). • Delivery conditions: EXW / Ex Works (Boécourt, Switzerland). The machine is sold on the ground. Disconnection of fluids and electricity will be carried out by us. Crane operation, loading onto a truck, and transportation are entirely the responsibility and cost of the buyer. • Availability: Immediate. Removal after full payment has been received.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. Nwsdpfx Aez Ernljc Ajl • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding length: 1,500 mm, grinding spindle motor power: 7 W, grinding wheel diameter: 200 mm, GOCKEL G50 el straight knife sharpening machine Nwodpjz D H Rlefx Ac Ael Machine has been overhauled and is in perfect working order. Mechanical feed. Variable feed rate. 7.5 kW spindle.

Condition: like new (used), We are offering this Copeland Z9-6MM-30X-AWM in like-new condition, with the year of manufacture unspecified. We are selling a Copeland semi-hermetic, air-cooled condensing unit, removed from a cold room installation. Nsdpfx Acsz D Erbj Aewl Specifications: Brand: Copeland Model: Z9-6MM-30X-AWM Frequency: 50 Hz Purchased new in 2021 Professionally dismantled in 2022 In perfect working order Stored indoors since dismantling The equipment can be viewed and collected in the Besançon area. If you have any questions or require further information, please do not hesitate to send us a message or call us.