Used Grease Gun for sale (1,956)

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02343, EVT GIGANT Vapor Degreasing System The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this design does not include flooding of the work chamber, the required solvent volume remains relatively low, despite the large chamber size. This system is in good used condition and can be inspected and tested in our technical center in D-75447 Sternenfels by arrangement. Technical highlights: - The system recently underwent a comprehensive maintenance service by EVT. - The system was inspected for compliance with the German Federal Immission Control Act (BImSchV) by Chemlab as recently as March 2026. - The system was approved by DEKRA in July 2026. System features: - Closed system without exhaust air - Top loading - Rotating and pivoting device - Spray device - Flooding device with heated feed tank - Vapor degreasing - Recirculating air drying - Activated carbon module (designed for 2-shift operation) - Atmospheric distillation - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 1100x450x370 mm (internal dimensions) or alternatively 6 x 480x320x200 mm (external dimensions) - Throughput: max. 2 batches/h - Compressed air: 6 bar System availability: from October 2026 Bodszrw Dbepfx Afmslp P.S. This offer is non-binding and subject to change. Modifications, errors and prior sale expressly reserved.

Condition: new, empty load weight: 4,830 kg, overall weight: 44,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, suspension: air, tire size: 385/55R22,5, Equipment: ABS, truck registration, | D-Tec VCC Container Chassis | Center and rear extension | 1st axle can be lifted | VALX axles with disc brakes | Tires: 385/55 R22.5 | New vehicles | Subject to errors, typing errors, and prior sale. Blodpjzrxbhofx Afmsp

Condition: new, Exhibition model *JCB 26C-1 Pro mini excavator* - JCB diesel engine by Kohler [18.4 kW / 25 hp] - Comfort cab with sprung fabric seat (ROPS/FOPS) - 2-speed travel drive - Radio - Rubber tracks 300mm - AUX I and AUX II (hammer/shear hydraulics) - 1,300mm dipper arm - Boom cylinder guard on the entire arm - LED work lights front/rear - Mirror package - Armrest right / left - SBSV FOR BOOM, STICK, AND BLADE CYLINDERS - Additional control unit - Grease gun *Optional, for an extra charge* Bucket package / ditching bucket / deep digging bucket / mechanical quick coupler / Powertilt Ready for immediate use, many more attachments in stock. We would be happy to schedule an appointment for you to view the machine. If you wish, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (Tel.) will be happy to assist you. You can find more information on our website. Errors and prior sale are subject to change! = Further information = Blsdpfx Aszt Hhxjfmep Year of manufacture: 2025 Drive type: Track Please contact Tobias Ebert for further information.

Condition: excellent (used), Product description: Model: RKR!200/2 Cleaning basin on a stable base with cross braces. The perforated sheet made of galvanized steel is set into a basin with a conical outlet. The rear and side walls are hot-dip galvanized and equipped with edge protection. • Self-priming pneumatic drum pump • Dimensions: 120 x 80 x 133 cm (L x W x H) • Load capacity: approx. 30 kg Bsdpfxjzua Eas Afmjlp • Working height: approx. 1040 mm Model: RKR!200/2!D

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, MAJA SKINNY | Automatic skinning machine / strip defatting machine Manufacturer: MAJA-Maschinenfabrik Hermann Schill GmbH & Co. KG Model / Type: SKINNY Serial number: 43188 Year of manufacture: 2001 Power supply: 400 V, 50 Hz, 3~ (three-phase), 2.2 A Power: 0.75 kW Overall dimensions: 1200 x 800 x 1200 mm Bljdsz S Rg Ijpfx Afmep Length of conveyor belt: 3700 mm The MAJA SKINNY is a professional, automatic strip skinning machine from the renowned German manufacturer MAJA, designed for the quick and precise removal of skin and defatting of meat products (including pork, beef, and poultry). The device is widely used in meat processing plants, butcher shops, cutting rooms, and food processing facilities focused on continuous performance and high-quality finished products. The use of an automatic strip feeding system ensures a continuous flow of raw material, which significantly increases efficiency compared to manually operated devices and guarantees the highest level of operator safety. The cutting mechanism precisely separates the skin from the meat without excessive loss of valuable raw material, allowing for optimal processing profitability.

Condition: new, power: 316 kW (429.64 HP), first registration: 07/2023, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, loading space volume: 20 m³, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - PTO = Notes = Fuel tank: 290 liters Air conditioning Equipped with a Ravasini fuel tank with a capacity of 20,000 liters. Three compartments (6,800 l + 6,500 l + 6,800 l + expansion volume) Manhole with cover, 500 mm diameter, complete with inlet and breathing valve, and including a collection basin in case of liquid spillage from the manhole. Pumping unit housed in a suitable stainless steel box, positioned on the rear side of the vehicle. Positive displacement pump, 500 l/min. Liter counter with a flow rate of 550 l/min, complete with filter, degasser, check valve, with a positive displacement head providing partial measurement with 5 resettable digits and total measurement with 7 non-resettable digits. Manually operated hose reel with 20 m of 1.5-inch hose and delivery gun. = Further Information = General Information Year of construction: 2023 Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Transmission Transmission: ZF16TX2240TO, automatic Blodjzn U Hxepfx Afmep Axle Configuration Tire size: 315/80R22.5 Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 13,400 kg Payload: 20,100 kg GVWR: 33,500 kg Functional Body manufacturer: Ravasini Number of compartments: 3 Pump: Yes Hoses: Yes

Condition: like new (used), functionality: fully functional, cooling capacity: 895 kW (1,216.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,525 kg, input voltage: 400 V, total width: 2,400 mm, total length: 12,960 mm, total height: 2,850 mm, warranty duration: 6 months, Gas cooler & Evap CX heat pump Güntner S-GGDV CD 090.1 DE/2C-E-44 Bledpfx Afjzqui Ejmjp Gas cooler capacity: 895.0 kW Evaporator capacity: 465.0 kW Refrigerant temperature: inlet 120.0°C — outlet 37.0°C (gas cooler) Evaporation temperature: -2.0°C (evaporator) Air flow: 216092 m³/h Fans: 24 pcs. EC, 3~400V 50-60Hz Tubes: copper / Fins: epoxy coated Heat exchange surface: 4839.5 m² Max operating pressure: 130.0 bar Dimensions: 12.96 x 2.4 x 2.85 m Weight: approx. 6525 kg Condition: used for testing

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Blsdpfx Aozgclmjfmep Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR760. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, 30 Station ATC, Renishaw spindle and table probing, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 760 mm, Y Axis 610 mm, Z Axis 610 mm Spindle Gauge Plane to Table (~ max) 710 mm, Spindle Gauge Plane to Table (~ min) 100 mm TABLE: Length 1000 mm, Width 600 mm T-Slot Width 18 mm, T-Slot Centre Distance 100 mm, Number of Std T-Slots 5, Max Weight on Table (evenly distributed) 900 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 Through Spindle Coolant, Coolant Flow Rate at Cutter 160 L/min, Through Spindle Coolant Pressure 20 bar (Std) FEEDRATES: Rapid and Jog (Max.) 20 m/min Cutting Feed Rate (Max.) 20 m/min BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg Bedpfx Aezzairefmslp COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Washdown Flow Rate 140 L/min ACCURACY – ISO 230-2: Positioning Accuracy 0.010 mm Repeatability 0.004 mm GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X760 Y610 Z610 mm | 12000RPM | BT40 Accessories: Renishaw Probing, Through spindle coolant, 30 Position Side mount tool changer, Swarf conveyor, Chilled 12000RPM Spindle

Condition: refurbished (used), machine/vehicle number: R-00700, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in {year_of_manufacture_robot}. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: {year_of_manufacture_robot} Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Bljdpfx Aoz U I Nxofmsp Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.10 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00696, load capacity: 185 kg, arm reach: 3,060 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/185L manufactured in 2013.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/185L Model Number: A05B-1329-B211 Year of Manufacture Robot: 2013.06 Warranty term (months): 12   Payload (kg): 185 Reach (mm): 3060 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1290 Bljdpfsz U Nfzsx Afmep   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.12 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00608, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/70 manufactured in 2011.04. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2011.04 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560 Bodpj Aaz Hyefx Afmjlp   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2011.04 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00602, load capacity: 280 kg, arm reach: 3,103 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/280L Model Number: A05B-1335-B203 Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 3103 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Bsdpfxe Aa Ab Ee Afmjlp Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 1600   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00588, load capacity: 280 kg, arm reach: 3,103 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280L manufactured in 2017.04. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/280L Model Number: A05B-1335-B203 Year of Manufacture Robot: 2017.04 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 3103 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 1600   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Bledpj Aa Ai Njfx Afmsp Teach Pendant Cable Length (m): 10

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Technical Specification Bsdpfx Afj Aa Aufjmslp Counter Spindle No Driven Tools Yes

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00673, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/250F manufactured in 2011.08. The robot comes with an R-30iA B-Size controller including iPendant.   Bedpfxo Aaxrto Afmslp Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/250F Model Number: A05B-1329-B215 Year of Manufacture Robot: 2011.08 Warranty term (months): 12   Payload (kg): 250 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1270   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.08 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00652, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/50 manufactured in 2010.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2010.05 Warranty term (months): 12   Blsdpfj Aaygfsx Afmop Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2010.04 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2009, machine/vehicle number: R-00649, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, FANUC R-2000iB/165F manufactured in 2009.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/165F Model Number: A05B-1329-B201 Year of Manufacture Robot: 2009.05 Warranty term (months): 12   Payload (kg): 165 Blodpe Aaymljfx Afmsp Reach (mm): 2655 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1170   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2009.05 RCC Length (m): 14   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00630, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/165F manufactured in 2017.01. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/165F Model Number: A05B-1333-B201 Year of Manufacture Robot: 2017.01 Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Blodpe Aay Trofx Afmsp Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2016.12 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: used, operating hours: 29 h, Description: BOBCAT E27 Z 29 short-tail excavator, demonstration model, quick coupler 29, operating hours like new, TOP condition!! * First commissioning in 2026 * Standard equipment * TOPS/ROPS cabin with heater * 1,500 mm dozer blade * 300 mm rubber tracks * Long dipperstick * Heavy counterweight * Hydraulic bolt-on quick coupler LA with E27z2 cabin, with AUX5 * Automatic idle Blodpfx Afs Agw Nvsmop * LED work lights on the front and rear of the cabin * Floating function for the dozer blade * Adjustable double-acting auxiliary hydraulics with quick couplings * Battery disconnect switch * Pre-installation for hydraulic clamp * Control console lock * Hydraulic monitoring with shut-off * Foldable and ergonomic pedals * Warning tone when the fuel tank is full * Grease gun holder * Horn * Proportional auxiliary and swing hydraulics control via push button * Automatic safety belt * Suspension seat with high backrest * Two travel ranges with automatic transmission * Four mounting points on the upper carriage Technical specifications: * Diesel engine D1105-E4B-BCZ-1 (Kubota) * 15.3 kW at 2,400 rpm * Cooling: Water * Hydraulics: Total flow rate: 86.8 l/min * System relief pressure for auxiliary hydraulic circuits: 180 bar * Auxiliary hydraulic flow: 50.0 l/min * Digging depth with long dipperstick: 2,847 mm * Max. speed, low range: 2.5 km/h * Max. speed, high range: 4.3 km/h * Operating weight: approx. 2,700 kg (cabin + heater) * Quick coupler M503 with lifting hook * Swivel bucket, hydraulic, 1,200 mm * 2 years Bobcat manufacturer's warranty or 2,000 operating hours. Despite the greatest care, errors within the advertisement cannot be ruled out. We reserve the right to make changes and sell the item in the meantime!

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00707, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.03 RCC Length (m): 7 Bjdpfxo Afuy Re Afmjlp   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MULTIMILL 1000 by EDEL Werkzeugmaschinen GmbH New-machine quality at a price that takes the pressure off your costing. The MULTIMILL 1000 is a 5-axis all-rounder with turning capability, mastering milling and turning in a single setup. Proven EDEL technology, combined with our complete factory refit procedure: every assembly overhauled, all wear parts renewed, fully measured and backed by factory warranty. Bjdspiqzkspfx Afmolp Technical specifications: 1 5-axis milling machine EDEL MM1000 X/Y/Z: 1,000/800/700 mm 1 NC universal milling head M21 B-axis, (-)10° to (+)187°, 900/1,680/4,000 Nm, 330°/s, (55 rpm) 1 Milling spindle CS-21-180-A 21/32 kW, 100/130 Nm, 18,000 rpm, HSK-A63 1 NC rotary table CRT/1000/H/HT 960/2,048/4,000 Nm, 570°/s, (95 rpm), 20,000 N (centric) Face plate diameter: 900 mm 1 Heidenhain TNC 640 5-axis contouring control electronic handwheel HR 510 DXF converter CAD viewer KinematicsOPT enhanced energy efficiency 1 Remote service 1 Extraction unit for oil and emulsion mist filter systems, capacity approx. 2,000 m³/h cascaded filtration 1 Coolant/lubricant system 950 litre tank capacity External coolant supply: 30 l/min / 20 bar Through-spindle coolant: 20 l/min / 50 bar Wash-down gun: 40 l/min / 2 bar 1 Workpiece measuring system Touch probe BLUM TC 60 BRC radio technology 1 Tool changer HSK-A63 / 52 pockets Tool diameter 75/130 mm Tool length 300 mm Tool weight 8 kg 1 Chip conveyor Hinge belt / scraper belt conveyor 1 Switchable external air cooling (coolant / air) Coolant: 20 bar / Air: 6 bar 1 Turning technology package Machine control Heidenhain TNC 640 Rotary table CRT/1000/H/HS Tool interface HSK-A 63 Spindle clamping device Tool measuring system for turning tools 1 Switchable internal through-spindle cooling (coolant / air) Coolant: 50 bar / Air: 6 bar 1 Tool changer HSK-A63 / 80 pockets INSPECTION AND DEMONSTRATION AVAILABLE AT ANY TIME Arrange an appointment at our plant, and we will show you the machine in live cutting operation.

Condition: excellent (used), mileage: 122,085 km, first registration: 03/2016, fuel type: diesel, axle configuration: 8x4, wheelbase: 4,600 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, second fuel tank, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Speed limiter - Refrigerator - Air suspension - Air horn - Particulate filter - Reversing camera - Sun visor - Stability control - Toolbox - Power Take-Off (PTO) - Central lubrication = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 29,420 kg Transmission Transmission: I-SHIFT, automatic Axle Configuration Front axle: Steerable Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; steerable Functional Body brand: MTS DINO 5 4A 14T 36000V Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FMX 8x4 Tridem MTS DINO 5 Suction Excavator EURO 6 L PACKAGE 510 HP DRIVE 8X4 TRIDEM, LAST AXLE LIFTABLE AND STEERABLE WHEELBASE 460 CM AIR SUSPENSION LARGE FMX CAB WITH AIR-CONDITIONING, CAMERA, NAVIGATION, REFRIGERATOR DIFFERENTIAL LOCK AUTOMATIC TRANSMISSION MTS DINO 5 SUCTION EXCAVATOR TYPE 4A14 T 36,000 V DOUBLE TURBINES!!! Bodpfeuxrvaox Afmolp HYDROSTATIC DRIVE WITH REMOTE CONTROL POWER BOOM WITH ROTARY HEAD CENTRAL LUBRICATION 2X REMOTE CONTROL EXTRA HIGH-PRESSURE PUMP UNIT WITH HOSES AND GUN EXTRA AIR VALVES AT THE REAR OF THE TRUCK TO OPERATE AIR TOOLS SUCH AS A HAMMER COMPRESSOR 4,041 HOURS FAN 4,041 HOURS ALL AVAILABLE MANUALS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Bjdpfoziwwijx Afmjlp Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale Bjdpfx Afo Af Ultemelp