Used Grain for sale (711)

Condition: used, maximum load weight: 34,900 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 10/2026, loading space length: 10,000 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,861 mm, Year of construction: 2021, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "AGRAR-LINER" First registration 04/2021 Mileage 203,910 km Internal dimensions (LxWxH): 10,000 x 2,350 / 2,450 x 2,280 mm (conical body design) Unladen weight only 7,100 kg Nledpfx Abey Nvrzokjc Z-chassis, cranked design Floor made completely of 3 mm Hardox steel HB450 Front wall and side walls 3 mm Hardox steel HB450 Inclined front wall, interior access Single-leaf aluminum combination door with swinging function, pneumatic rear unlocking 1 grain discharge slide Reinforced roof roll tarp HYVA tipping cylinder, Alpha type, suitable for both high and low pressure Full-load aluminum landing legs 2x pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm First axle is a lift axle WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard Raise and lower device Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on right side 4x LED reversing lights RENTING is the new BUYING – immediate availability also on full-service rental with us-----

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035390, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Nlsdpfx Asy Tvuwsbkjc Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, container locks: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, with the longer version of the pivot pins for the container locking mechanism. 24 tons. Two-stage support jacks, single-person operation, with straight lower part, without lateral thrust compensation. Outrigger plates with holder, side impact protection, underrun protection (aluminum). Nsdpey Tvphsfx Abkolc With anti-splash flaps according to EC, stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam. Hose racks approx. 4500 mm long (including hose box) for hose pipes 2 x DN 200 on the outside + 2 x DN 160 in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes, stainless steel grounding plate at the rear on the right-hand side of the frame, with international grounding sticker on the frame, steps at the rear right on the underrun protection, at the rear on the right-hand side on the main beam, tread plate approx. 260 mm long and 300 mm wide. Axles + Suspension SAF disc brake axles, "axle / chassis laser-measured" reduces tire wear and fuel consumption, axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight. Air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, activation "3x brake" (starting aid is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy servicing. Spring brake parking brake. 2 non-interchangeable coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve, vehicle - driving stability system. Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installed. Wheels and tires 385/65 R22.5", manufacturer's choice, steel rims, factory silver. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole socket at the front, without connection cable. Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle / support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution is possible). This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-cross-member-load-transfer areas"). Country of registration / Signage Warning sign according to ECE - 70, approval according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III, / registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for sub

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Nsdpfey Rrplsx Abkjlc with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031190, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 03/2027, loading space length: 9,300 mm, loading space width: 9,300 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: grey, The images are archive images. The vehicle may still be in use! Unbeatable unladen weight! Chassis, semi-trailer, tipper Fine-grain steel welded construction, lightweight design, kingpin plate with interchangeable 2" kingpin Curved front panel "Patented" 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2x chock blocks with holder Aluminum side underrun protection Underrun protection, foldable 6x half-shell fenders Integrated "fender holder," surface is dirt-repellent 2x with anti-splash flaps, only on the last axle 2x tow hooks at the rear Axles + Suspension SAF disc brake axles Axles in off-road design "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid, activated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism," 10-year warranty against rust-through Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 6x 385/65 R22.5", manufacturer at the discretion of the manufacturer 6x steel rims, manufacturer at the discretion of the manufacturer Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material. Nledey Rlvropfx Abkec Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow profile, cleanly welded, with top profile that prevents material from spilling. Interior with climbing aid on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - tapered and aerodynamic tipper body shape "Membrane" - rear wall Rear wall as a swing-open flap with "double-joint hinge," externally supported with double hook lock. Rear wall with rubber seal Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel, and rolled gravel with a maximum grain size of up to 20 mm! All other goods are excluded from the warranty! Rolltarp, single-sided, for storing on the right-hand side, with central locking on the left-hand side Unbeatable unladen weight! The images are archive images. The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031191, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2024, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use! Chassis: Semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2'' kingpin Patented curved front panel 24-ton 2-speed landing gear, single-side operation, with straight base, with lateral compensation 2x wheel chocks with holders Side underrun protection: aluminium Rear underrun protection, foldable 6x half-shell mudguards Integrated "mudguard holder" with stone-repellent surface 2x with anti-spray flaps (only on the last axle) Axles & Suspension 3x SAF disc brake axles Axles in off-road specification "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, activated by "braking 3x". (Traction aid functional up to 30% axle overload and up to a max speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" – 10-year warranty against corrosion Braking System 2-line compressed air braking system Coloured line routing for easy servicing Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS by Haldex, electronic braking system with EBS socket at the front (without connection cable) Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! With raise & lower valve Vehicle stability system Wheels and Tires 6x 385/65 R22.5", manufacturer’s choice 6x steel rims, manufacturer’s choice Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, nominal width 48 mm. (without hose connection) Actuation hydraulically via truck PTO Body / Tip Body Aluminium box body, high-quality abrasion-resistant material Sloped front wall, 5 mm thick, with external cylinder mount Side walls made of 30-mm hollow-chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Internal access on front wall (not in combination with Cramaro). Shovel and broom holder on outside of front wall Nsdjy Rl Unopfx Abkolc Greenline – conical, aerodynamic box shape "Membrane" tailgate Tailgate: pendulum door with double-joint hinge, externally mounted, double hook lock Tailgate with rubber seal Note: Heat-resistant up to 170°C max! Floor: continuous 5 mm, Brinell 110 Note: Only suitable for transporting sand, chippings and gravel, max grain up to 20 mm! All other goods excluded from warranty! Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard chrome-plated piston rod to avoid corrosion and pitting. The stated gross weight is technically feasible; depending on load, the actual gross weight may not be achievable within the legal axle, support, and fifth-wheel loads. (Improper load distribution may impair driving and tracking behavior) Paint Finish Frame: DB 7350 Novagrey "10-year warranty against corrosion" Landing gear: black coated Body: natural aluminium Roller tarp: RAL 7035 light grey

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33502014693, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r19,5, tire condition: 100 %, Further information: Fine-grained steel welded construction, drawbar with 2 replaceable kingpins, 14 pairs of lashing eyes recessed in the outer frame, each with a capacity of 2.5 tons, outer frame with Load-Lock profile for attaching lashing straps. Note: Not suitable for use with sideboards! 24-ton, two-stage support winch, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation. 2-stage extension ladder at the rear, door retainer on the side, chocks with holder, aluminum side impact protection, galvanized steel underrun protection, partial wheel arches in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, spare wheel holder for 1 spare wheel, with wheel fastening kit, plastic toolbox. SAF disc brake axles, air suspension. 2-line compressed air braking system, spring brake parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, vehicle stability system, tire pressure monitoring system TPMS Haldex, in conjunction with the info center. 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole tamper-proof sockets at the front, without connecting cable, LED safelight, at the top in corner posts at the rear. Floor: Sieve-printed panels approx. 30 mm thick, cross members with omega inserts, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,600 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side rails: 5 pieces of sliding rails that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket (3 x on the right side and 2 x on the left side), 5 pieces of rail positions (3 x on the right side and 2 x on the left side), aluminum insertion strips. Corner posts at the rear: steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-wing with 2 internal rotary latch locks each. Tarpaulin with welded-in horizontal and vertical straps, reinforcements for side rails. Quick Lock system for side tarpaulin with central lock, on one side on the left, tensioning devices made of stainless steel on the right, tarpaulin with recessed vertical slats as a load securing tarpaulin, on one side on the left (then only 2 pairs of side rails on the left). Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with the tarpaulin sliding from the back to the front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, liftable roof, mechanically liftable by approx. 380 mm, liftable roof for opening with the doors closed. Nedjkyrlzopfx Abkslc Country of registration: Germany, type approval according to EG 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, prepared for single-line license plate holder, warning sign according to ECE - 70, refl

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/55 r19,5, Fine-grain steel welded construction, kingpin assembly with two replaceable kingpins. Note: With a frame neck height of 30 mm, the truck wheelbase must not exceed 3700 mm! Outer frame slightly angled with load-lock profile for attaching lashing straps. Note: To attach the straps in conjunction with side walls, the side walls must be opened! Not in the neck area! 10 pairs of lashing eyes recessed into the outer frame, each with a capacity of 2.5 tons. Outer frame with load-lock profile for attaching lashing straps. Note: Not usable with side walls! 24 tons. Two-stage support jacks, single-sided operation, with a straight lower section, without thrust compensation, folding supports at the front, extending outwards and folding downwards in front of the front wall. Retracted as far as possible inwards in the driving position (for uncoupling under load), without supports, extension ladder at the rear, door lock on the side, shims with holder, aluminum side impact protection, galvanized steel underrun protection, quarter panel fenders in front of the first axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection. Heavy-duty rear impact protection beam, pallet stop in heavy-duty design on both sides, approximately 20-25 mm high, with lashing capability every 200 mm, loading height reduced by approximately 20-25 mm, plastic tool box. SAF disc brake axles, air suspension, without lift axle. Two-line compressed air brake system, spring brake parking brake, 2 non-interchangeable coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Attention: The trailer may only be pulled by tractor units which ensure the effectiveness of the ABS! With raise and lower valve, vehicle - driving stability system. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front. 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connection cable. Floor: Front area with steel floor and anti-slip coating, plywood panels approximately 30 mm thick, crossbars with omega insert, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg, in the wheel area steel/diamond plate covering. Front wall/corner posts: 2,580 mm high, corner posts made of steel in volume design, release mechanism for side tarpaulin on front wall, at the bottom inside at approximately 140 mm height with steel impact protection. Center posts: 3 pairs of sliding posts, slidable over the entire length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of post positions, aluminum insertion slats. Rear corner posts made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel rod locks each. Nodekyrlwepfx Abkolc Tarpaulin with welded-in horizontal and vertical straps, tensioning buckles made of stainless steel, customer lettering on rear portal. Roof: Sliding tarpaulin, rear end lift that folds up, with the tarpaulin slidable from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approximately 2,490 mm, tarpaulin color: white, EcoLift - liftable roof, can be raised by approximately 380 mm, with gas spring support, anti-ice system, with one hose in the center, with automatic ventilation.

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine - Nlsdpfx Aovxkv Usbkjc

Condition: used, maximum load weight: 32,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2022, next inspection (TÜV): 05/2027, loading space volume: 49 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2022, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until a sale is concluded, subject to errors, typographical errors, and prior sale: Reisch, approx. 49 cubic meters grain tipper (Vehicle No. 651) Nsdszfumgspfx Abkslc First registration: 20.06.2022 Type: R24-RHKS-3-AG09 Permissible total weight: 39,000 kg Unladen weight: 6,050 kg Payload: 32,950 kg External dimensions: approx. L: 10,800 mm, W: 2,550 mm, H: 3,600 mm Internal length: approx. 9,500 mm Internal width: approx. 2,450 mm Internal height: approx. 2,100 mm Floor: 5 mm TÜV (technical inspection): 06/2026, SP (safety inspection): 12/2026 Angled gooseneck Swing door with all-round rubber seal Grain discharge slide Additional manual tension latches on the exterior rear door Tarpaulin cover, platform, grain discharge slide Fold-up underrun protection 2 x 12-ton, 2-speed geared winch Air suspension with lifting and lowering function Access ladder, stored on the mudguards at the rear SAF drum 1st lift axle Tires: 385/65R22.5, 1st tire approx. 60/80%, 2nd tire approx. 60/80%, 3rd tire approx. 60/70% Axle wheelbase: 1,310/1,310 mm SAF 9,000 kg axles Axle pressure gauge Storage box, plastic, on the driver and passenger sides in the center Wheel chock Aluminum body, approx. 48 cubic meters Tarpaulin cover, platform Swing door with grain slide Clean floor and walls Shovel and broom holder Towing eye at the rear Fold-up underrun protection 2 x reversing lights Price: €28,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust Local Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2020, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, and subject to availability until final sale, errors, typos, and prior sale, we can offer you the following vehicle today: Nledozful Nepfx Abkoc Reisch 65 cbm sliding floor trailer (Vehicle 674) First registration: 06/03/2020 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,000 kg Payload: 33,000 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,670 mm Load volume: approx. 65 cbm TÜV (technical inspection): 06/2027, SP (safety inspection): 12/2026 Roller shutter, platform Clean floor, end pieces, sides, reinforced walls at the rear Portal doors 1/2 and 1/2 at the rear, grain slide Remote control Cargo floor LED work lights + reversing lights 2 x 12 to 2 gear ratio winch Shovel and broom holder on the driver's side in front Storage box, plastic, driver's side, center Air suspension with lifting and lowering function 1 lift BPW drum brakes Tires: 385/65R22.5, 1st tire approx. 70/70%, 2nd tire approx. 80/80%, 3rd tire approx. 50/50% ALCOA aluminum rims Pull-out ladder, passenger side, rear Access ladder behind the kingpin Half-shell fenders Price: €27,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2020, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: Reisch 65 cbm sliding floor semi-trailer (Trailer No. 675) Registration date: 03.06.2020 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,000 kg Payload: 33,000 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,670 mm Load volume: approx. 65 cbm TÜV inspection valid until: 06/2027, SP (emission test) valid until: 12/2026 Roll tarp, platform Clean floor, end pieces, sides, reinforced walls at the rear Portal doors 1/2 and 1/2 at the rear, grain slide Remote control Cargo floor LED work lights + reversing lights Nlsdpezfumajfx Abksc 2 x 12-ton, 2-speed gear winch Shovel and broom holder on the driver's side at the front Storage box, plastic, driver's side, center Air suspension with lifting and lowering function 1st lift axle BPW drum brakes Tires: 385/65R22.5, 1st approx. 40/80%, 2nd approx. 70/90%, 3rd approx. 80/80% ALCOA aluminum rims Extendable ladder on the passenger side at the rear Access ladder behind the kingpin Half-shell fenders Price: € 27,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to € 10,000 is the Ludwigslust District Court; for disputes exceeding this amount, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: used, maximum load weight: 28,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 07/2026, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,665 mm, Year of construction: 2022, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle today, subject to final sale, errors, typographical errors, and prior sale: Reisch 65 cbm sliding floor trailer (Vehicle 607) First registration: 07/05/2022 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 35,000 kg Unladen weight: 6,680 kg Payload: 28,320 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,665 mm Load volume: approx. 65 cbm MOT valid until: 07/2026, next inspection: 01/2027 Rolling tarp, platform Clean floor, end pieces, sides, reinforced walls at the rear Portal doors 1/2 and 1/2 at the rear with grain slide Remote control Cargo floor LED work lights + reversing lights 2 x 12-ton, 2-speed geared winch Storage box, plastic, passenger side, rear Nljdpfx Abezful Askec Air suspension with raising and lowering function 1 lift axle SAF disc Tires: 385/65R22.5, 1st approx. 70/60%, 2nd approx. 60/50%, 3rd approx. 60/80% Half-shell fenders Access ladder Price: €30,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust local court; for disputes exceeding this value, it is the Schwerin regional court. Errors, typographical errors, and prior sale are subject to change.

Condition: used, maximum load weight: 32,880 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2023, next inspection (TÜV): 07/2026, loading space volume: 49 m³, Year of construction: 2023, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Reisch, approx. 48 cbm grain tipper (Vehicle 661) First registration: 07.07.2023 Type: R24-RHKS-3-AG09 Permissible gross vehicle weight (GGV): 39,000 kg Unladen weight: 6,120 kg Nledpezfulpsfx Abkec Payload: 32,880 kg External dimensions: approx. L: 10,787 mm, W: 2,544 mm, H: 3,584 mm Internal length: approx. 9,500 mm Internal width: approx. 2,450 mm Internal height: approx. 2,100 mm Floor: 5 mm TÜV (technical inspection): 07/2026, SP (safety inspection): 01/2027 Curved gooseneck Swing gate with all-round rubber seal Grain slide Additional manual tensioning locks on the external rear gate Rolltarp, platform, grain slide Fold-up underride guard 2 x 12-ton, 2-speed geared winch Air suspension with lifting and lowering function Access ladder, stored on the wheel arches at the rear SDAF coupling 1st lift axle Tires: 385/65R22.5, 1st: approx. 40/80%, 2nd: approx. 70/70%, 3rd: approx. 70/50% Axle distance: 1,310/1,310 mm SAF 9,000 kg axles Axle pressure gauge Storage box, plastic, driver's side, center Chock Aluminum body, approx. 48 cbm Rolltarp, platform Swing gate with grain slide Clean floor and walls Shovel and broom holder Towing eye at the rear Fold-up underride guard 2 x reversing lights Price: €31,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,710 mm, Year of construction: 2025, Equipment: ABS, Wielton Bulk Master with gooseneck Aluminum square tipper body with combination tailgate, loading volume 51m³ Doors symmetrically split, two grain chutes Floor plate 7 mm ENDUR aluminum HB 114 Nlsdpfxoxv Nwnj Abksc Unladen weight 6,480 kg Fifth wheel height 1,200 mm New vehicle – available immediately - SAF disc brake axles Ø430 - First axle as lift axle - Automatic tipping lowering function - SAF landing gears - Foldable steel underrun protection - Aluminum air tanks - Tyres: 6x 385/65 R22.5 Goodyear Kmax - Steel rims - Brake system KNORR 2S/2M - Inclination warning sensor - ASPÖCK lighting system with EcoLED II LED taillights - 2x LED reversing lights - 2x LED working lights mounted on the sides - Low-pressure cylinder HYVA Alpha 190 bar - Roll tarp 890 g/m² with quick-release fastener, center tubes integrated - Working platform mounted on chassis, access on driver’s side - Tension chain between side walls in the body - Water tank with soap dispenser - 145-liter PVC toolbox - Aluminum ladder (2,840 mm) - Extendable steel access ladder mounted at the rear - Dust bag - Frame painted RAL 7021 black grey, body painted RAL 9006 white aluminum - Roll tarp light grey Interim sale and errors for this offer are expressly reserved. Some images show optional equipment. The terms of the order confirmation or purchase contract are solely decisive. Exact equipment details and prices are available from our sales staff. Please contact us.

Condition: new, maximum load weight: 29,760 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,710 mm, Year of construction: 2026, Equipment: ABS, 30 YEARS GREEN EDITION - Grain Master Wielton Bulk Master with gooseneck Aluminium box tipper with combination tailgate, load volume 51m³ Symmetrically split doors, two grain chutes Floor plate 7 mm ENDUR aluminium HB 114 Floor-wall junction with welded corner pieces Unladen weight: 6,240 kg Fifth wheel height: 1,200 mm New vehicle - immediately available - SAF disc brake axles Ø430 mm - First axle as lift axle - Automatic tipping lowering system - Aluminium drop supports - Foldable steel underrun protection - Aluminium air tanks - Tyres: 6x 385/65 R22.5 Hankook - ALCOA Dura-Bright alloy wheels - Braking system: Wabco 2S/2M - Tilt angle warning sensor - ASPÖCK lighting system with EcoLED III ABERG LED tail lights - 2 x LED reversing lights - 2 x side-mounted LED work lights - 1 x LED light inside the body - HYVA Alpha low-pressure cylinder 190 bar - Tarpaulin 680 g/m² with quick-release system, central tubes integrated - Working platform mounted on chassis, driver’s side access steps - Tension chain between sidewalls inside the body - Water tank with soap dispenser - 2 x PVC toolboxes, 145 litres - Aluminium leaning ladder, 2,840 mm - Shovel and broom Njdpfey A A Rqex Abkolc - Steel rear access ladder, extendable - Continuous mud flap on underrun guard - Frame painted in RAL 7021 black grey, body in RAL 6018 yellow green - Tarpaulin in RAL 6018 yellow green - 30 Years / Grain Master graphic Interim sale and errors for this offer expressly reserved. Some images show optional equipment. Only the agreements in the order confirmation or purchase contract are binding. For detailed equipment specifications and pricing, please contact our sales staff. Please get in touch with us.

Condition: new, maximum load weight: 29,760 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,710 mm, Year of construction: 2026, Equipment: ABS, 30 YEARS BLACK EDITION - Bulk Master Wielton Bulk Master with gooseneck Aluminium box body with combination tailgate, loading volume 51m³ Symmetrically split doors, two grain discharge slides Floor plate 7 mm ENDUR aluminium HB 114 Floor-to-wall transition with welded corner seams Unladen weight: 6,240 kg Fifth wheel height: 1,200 mm New vehicle - immediately available Nljdpfx Abjy Ekwqekjc - SAF disc brake axles Ø430 - First axle liftable - Automatic tipping lowering - Aluminium support legs - Folding steel underrun protection - Aluminium air tanks - Tyres: 6x 385/65 R22.5 Hankook - ALCOA Dura-Bright aluminium rims - Wabco 2S/2M braking system - Tilt warning sensor - ASPÖCK lighting system with EcoLED III ABERG LED taillights - 2x LED reversing lights - 2x lateral LED work lights - 1x internal LED light in the body - HYVA Alpha low-pressure cylinder, 190 bar - 680 g/m² tarpaulin with quick-release system, integrated central support tubes - Work platform mounted on chassis, access on driver's side - Tension chain between side walls in the body - Water tank with soap dispenser - 2x 145-litre PVC toolboxes - 2,840 mm aluminium access ladder - Shovel and broom - Extendable steel rear access ladder - Full-length mud flap on underrun protection - Frame painted RAL 9005 deep black, body RAL 9005 deep black - Tarpaulin RAL 9005 deep black - Graphics: 30 years / Bulk Master Subject to prior sale and errors in this offer. Some images show optional equipment. The scope and terms of equipment are defined solely in the order confirmation or sales contract. For precise specifications and pricing, please contact our sales team.

Condition: used, maximum load weight: 29,700 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, loading space length: 9,920 mm, loading space width: 2,460 mm, loading space height: 2,250 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,945 mm, Year of construction: 2025, Equipment: ABS, Wielton Aluminium Tipping Semi-Trailer, 55 m³ loading volume Combined rear door with two grain discharge chutes Unladen weight approx. 6,300 kg Demonstration vehicle – immediately available First registration: 02.07.2025 Fifth-wheel height: 1,150 mm - BPW disc brake axles Ø430 - Axle lift on the first axle - Automatic tipping lowering function - SAF gearbox landing legs, full load rated - Aluminium air tanks - WABCO 2S/2M braking system - Combined rear door with 2 grain sluices - Automatic 2-hook lock + threaded bolts - Double pendulum mountings and replaceable rubber seal - Floor plate 7 mm Endur-Aluminium HB 114 - Side wall profiles 350 x 40 mm, inner wall thickness 2.5 mm - Rolling tarpaulin with quick-release fastener, silver colour - Operating platform mounted on chassis - BINOTTO hydraulic cylinder up to 250 bar Nedpfxoxv Nwuo Abkjlc - 6x tyres 385/65 R22.5 Bridgestone R179XM - Steel rims - ASPÖCK lighting system - Full LED tail lights - 2 LED reversing lights - Toolbox and water tank - Aluminium access ladder - Rear-mounted aluminium climbing ladder - Shovel/broom - Frame painted RAL 7021 black-grey, body in RAL 9006 silver Interim sale and errors for this offer are expressly reserved. Only the agreements in the order confirmation or the purchase contract are binding. For exact equipment specifications and prices, please contact our sales staff. Please get in touch with us.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2025, Powerful jaw crusher 350 x 500 mm - fully electric & efficient! Nlodpovzqpmsfx Abkjc For sale is a robust jaw crusher 350 x 500 mm, ideal for stationary use. Thanks to the mechanical gap width adjustment, the desired grain size can be set precisely. 🔹 Fully electric - environmentally friendly & cost-efficient 🔹 Mechanical gap width adjustment for maximum flexibility 🔹 On a hook lift - ideal for stationary use This powerful crusher is the perfect solution for companies that need a reliable, electric crushing unit.

Condition: used, empty load weight: 6,117 kg, maximum load weight: 29,883 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 12/2026, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, aluminum body, 3 axles, SCB axles (disc brakes), air suspension, 1st axle liftable, raise/lower function, ABS (anti-lock braking system), roll tarp, catwalk, grain discharge, flap, U-shaped protection, side aluminum fender, supports. Body: 3-axle aluminum tipper with roll tarp, work platform, and grain slide, approx. 52 m³, available in multiple units! 3 x 9-ton SCB axles, disc brakes, 1st axle liftable, brake pad wear indicator, aluminum box body with an inner wall thickness of 2.5 mm, aluminum hinged flap resting at 90 degrees with rubber seal, automatic mechanical 4-hook locking system, aluminum floor with a thickness of 7 mm in the rear and 8 mm in the front, unladen saddle height approx. 1260 mm! Nlsdpfx Aezd Hk Usbkoc Supplier declaration from Schmitz available, EUR1 possible! Vehicle currently rented out until August 31, 2026! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, empty load weight: 6,460 kg, maximum load weight: 28,540 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2011, next inspection (TÜV): 10/2026, loading space length: 10,681 mm, loading space width: 2,456 mm, loading space height: 2,027 mm, total length: 25,500 mm, total width: 36,000 mm, total height: 118,500 mm, suspension: air, tire size: 385 / 65 R 22,5, Year of construction: 2011, front tire size: 385 / 65 R 22,5, rear tire size: 385 / 65 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW with drum brakes, aluminium body, air suspension with lift function, grain slider, raising and lowering, lift axle 1st axle, steering trailing axle 3rd axle, pendulum tailgate, sliding tarp, fixed side underrun protection, foldable rear underrun guard, working platform, duomatic coupling, discharge funnel, loading pressure gauge, aluminium rims, 2 x reversing lights, broom and shovel holder Nodpey N Efkofx Abkelc

Condition: used, empty load weight: 9,757 kg, maximum load weight: 32,243 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, loading space length: 13,127 mm, loading space width: 2,325 mm, loading space height: 2,755 mm, total length: 25,500 mm, total width: 39,570 mm, total height: 138,420 mm, suspension: air, tire size: 385/55 R 22.5, Year of construction: 2025, mileage: 1 km, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, color black, air suspension with lift axle, grain chute, lifting and lowering function, tipping body (dumper), lift axle on 1st and 3rd axle, roll tarpaulin, disc brakes, fixed side underrun protection, steel body, 1 storage box, foldable rear underrun protection, Duomatic coupling, load gauge, 2x 7-pin + 15-pin power connectors, working platform, Wabco SmartBoard, side LED work lights, pneumatic remote release, pneumatically foldable rear underrun protection, automatic lowering when tipping, Alcoa Dura-Bright wheels, single-wheel mudguards, broom and shovel holder, 2x LED reversing lights, aluminum ladder. Nedpfx Ajydfvqobkolc

Condition: used, maximum load weight: 29,952 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2024, next inspection (TÜV): 05/2027, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typographical errors, and prior sale: Schmitz, approx. 49 cbm grain tipper (Vehicle 572) First registration: 05/02/2024 Permissible total weight: 36,000 kg Unladen weight: 6,048 kg Nljdpfxjzfdmvo Abkoc Payload: 29,952 kg Overall length: 11,060 mm Overall width: 2,550 mm Overall height: 3,900 mm Internal length approx. 9,807 mm x Internal width approx. 2,440 mm x Internal height approx. 2,200 mm MOT valid until: 05/2027, roadworthiness test valid until: 11/2026 Rollover tarpaulin, platform 2 x support legs Dust bag 2 x wheel chocks Air suspension with raising and lowering function Shovel and broom holder on the driver’s side in front 1st lift Schmitz coupling Tires: 385/65R22.5, 1) approx. 40/30%, 2) approx. 80/40%, 3) approx. 40/40% Half-shell mudguards, plastic Tow hitch at the rear 2 x LED reversing lights Fold-up underrun protection Swing gate with grain slide and rubber seal Price: €35,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, maximum load weight: 28,660 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, loading space length: 10,500 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 59 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: Kempf, approx. 58.7 cbm, tipper with slide gate (Vehicle 859) First registration: 06.11.2024 Permissible gross vehicle weight: 36,000 kg Unladen weight: 7,340 kg Payload: 28,660 kg Overall length: 11,700 mm Overall width: 2,550 mm Overall height: 4,000 mm Internal length: approx. 10,500 mm Internal width: approx. 2,430 mm Internal height: approx. 2,300 mm Loading volume: approx. 58.7 cbm Overall height to loading edge when loaded: approx. 3,810 mm Interior lighting on the front wall Front wall at a 20-degree angle, made of 5 mm thick aluminum, and straight rear wall, side walls approx. 2.5 mm side wall profiles Nlodezfdlfspfx Abksc Floor: 7 mm thick Air vibrator, located at the front, covering approx. 1/3 of the loading area, at the rear left, near the lamp holders Operated via a switch TÜV (technical inspection): 11/2026, SP (safety inspection): 05/2027 All components attached to the frame are hot-dip galvanized Roll cover, platform Combination tailgate with swing gate + portal doors, portal doors 1/3 and 2/3 with viewing window and rubber seal, and grain slide Approx. 400 x 400 mm 1 dust bag Partition with 3 sliding partitions, pivoting towards the rear and lockable from the bottom left, 6 locking positions for the partitions Locking positions at approx. 1/5, 1/4, 3/4, 1/2, and 2/3 of the loading area Slide gate trough in the rear wall 3 aluminum tension bars for the cover Hooks for towing rod/cover High-performance bevel gear slide gate Kempf 400, throughput rate approx. 30-40 m3/h, 4 conveying hoses for the slide gate, approx. 5,000 mm long and 3" TW coupling, 4" cyclone H2O tank approx. 30 L 2 x LED reversing lights Fold-up underrun protection 2 x storage box, driver's side, center 1 pair of folding supports 2 x chock Load pressure gauge Storage compartments for hoses, left and right, above the axles, along the entire length 1 lift BPW turntable Tire pressure monitoring system Tires: 385/65R22.5, 1) approx. 80/70%, 2) approx. 80/70%, 3) approx. 70/50% PVC half-shell fenders 2 x LED work lights mounted on the folding supports Tilting cylinder: Penta 190-250 bar Lightly used Price: €80,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the District Court of Ludwigslust; for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 08/2023, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,740 mm, loading space volume: 90 m³, Year of construction: 2021, Equipment: ABS, ecoSTAR 90 cbm graphite black ECOSTAR FE CHASSIS - V13500 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal length of the body: 13500 MM Internal width of the body: 2475 MM Internal height of the body: 2650/2740 MM Volume of the body: 90 cbm Saddle height: 1150-1180 MM TECHNICAL DESCRIPTION 1. FRAME SUBFRAME High-quality steel S355JR (= ST52.3) construction. Chassis not painted but galvanized (EN ISO 1461), hot-dip galvanizing. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 tons Suspension: Original SAF air suspension Brakes: large disc - INTEGRAL Offset: ET 120 BVA: with BRAKE WEAR INDICATOR LIFT AXLE FUNCTION The third axle is a trailing steering axle (internal height front/rear 2650/2740 mm) + First axle is a lift axle STARTING ASSISTANCE is activated when a button in the truck is pressed (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. TIRES 6 x 385/65 R 22.5 on steel rims. ET 120. SADDLE BRACKETS JOST module with outrigger pads for air-suspended vehicles. Steering with single-hand operation and 2 speed levels. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-line compressed air brake system according to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets REAR LIGHTING IN THE UNDERBODY PROTECTION. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. WORK LIGHT ON THE FRAME 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control console. EXTRA WORK LIGHT 1 work light (Workpoint LED) on the front wall (INSIDE - right) - with switch in the front. HYDRAULIC SYSTEM Pressure: ? Female. Return line: 1 Female. HYDRAULIC POSITION Connection on the front wall. With additional connection option below the body in front of the support legs. Aluminum ladder (3.7 m) attached to the side impact protection (right). RETRACTABLE LADDER AT THE REAR integrated into the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking, with a 1-piece cover plate (floor cover not possible). TOOLBOX PVC with key (800 x 460 x 430 mm). Rear LEFT POSITION CONTROL CONSOLE + BOX TEM The control console is mounted on the rear left. The box for operating the floor system is also mounted on the rear left. Nsdpozfdgijfx Abkjlc FENDERS 6 plastic single wheel fenders. 2 Clear Pass spray guards are permanently attached to the plastic fenders. 2. BIN FRONT WALL The front wall consists of 30 mm thick aluminum plank profiles, type 600, with reinforced corner joints. COVERING INSIDE BETWEEN FLOOR-FRONT WALL Solid seal between the floor and the front wall by means of an aluminum profile and PVC sealing. SIDE WALLS Side walls with smooth design inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. FLOOR SYSTEM CARGO FLOOR CF 500 SL-C E-operation. 21 floor slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. Rear end plate made of aluminum. OPERATION OF THE FLOOR SYSTEM E-operation - Electrical with remote control (original Cargo Floor + multifunctional).