Used Grain for sale (711)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Pedsy R Nnfopfx Altopu Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 2023, Schneider Electric 2,500kVA Three-Phase Oil-Filled Distribution Transformer (Unused 2023) Rated Power: 2500kVA Frequency: 50 Hz High Voltage (Primary): 6000 V Low Voltage (Secondary): 725 V Cooling Method: ONAN Psdszc Ra Eopfx Altepu Vector Group: Dyn11 Conductor Material: Aluminum Core Material: Grain-Oriented Silicon Steel (GO HIB) Insulating Liquid: Shell Diala S4 ZX-I Tag TRAFO-06 See Lot Details pdf file in Attachments section on website for further information. Photos may feature items not included and should not be relied on. The description table/text describe the item(s) for sale in this lot.

Condition: new, new ! Ppodpfxezcax Dj Altou all stainless steel closed lid with seal 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: new, empty load weight: 3,490 kg, maximum load weight: 8,110 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way side tipper, side walls 600 mm high, galvanized, + lattice extension 1,000 mm high, width tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear drop sides, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions pluggable, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity 10 t per pair and 2 x folding supports, rear, ramps suitable for steel track vehicles and rubber tyres, price: 1.500 Euro, , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Ppsdpjzhr Iyefx Altou

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Ppodpfszhr Iasx Altju

Condition: excellent (used), Radial fan, conveying blower, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, press conveyor, pneumatic conveyor with injector, grain conveyor -Pressure blower: Pneumatic conveyor with filling hopper -Type: Ø 520 mm -Engine power: 4.0 kW / 2920 rpm Ppodpjzdzq Nefx Altou -Volume flow rate: m³/min -Inlet: Ø 215 mm -Fan wheel: Ø 520 x 45 mm -Fusing funnel: Ø 415 mm -Dimensions: 1790/650/H880 mm -Weight: 119 kg

Condition: good (used), Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant Podpfxerxw E Ej Altspu -Manufacturer: Walther Trowal, drying granulate type GM -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 72 kg

Condition: used, maximum load weight: 30,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 05/2026, loading space length: 9,550 mm, loading space width: 2,500 mm, loading space height: 1,700 mm, total width: 2,550 mm, total height: 3,830 mm, Year of construction: 2014, Equipment: ABS, * Rear portal doors with grain chute flaps * Platform with cover * 1st axle liftable * 3rd axle liftable (defective) * Wabco SmartBoard * Wabco Trailer EBS-E Remorque * SAF axles with disc brakes * Aluminum rims * Storage boxes ----* Tire size: 385/65R22.5 * Technical gross weight: 39000 kg * Tare weight: 5930 kg * Overall length: 11085 mm * Axle distances: 5490+1310+1310 mm * Next inspection due: 11.2026 ----Vehicle number: 12194----Errors and prior sale excepted----Advertising and various inscriptions have been digitally removed. Ppjdpfxozhfa Ne Altju -----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. In addition, we can offer the following services for an extra charge:----Trade-in of your old vehicle, TÜV/inspection, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport. -----Your VTS Team

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. Ppsdpow Naansfx Altsu The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Pjdpoy Nuf Tofx Altjpu Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: used, maximum load weight: 31,640 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle SCHWARZMÜLLER Full-ALU Walking Floor Semi-Trailer 91 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,470 x 2,680/2,780 mm Fifth-wheel height: 1,150 to 1,200 mm Axle distance: 1,310 mm Unladen weight: 7,380 kg ALU chassis SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version WABCO trailer EBS with roll stability support (RSS) 1st axle lift axle Aluminum air tanks 6x 385/65 R 22.5 tires JOST full-load crank landing gear ASPÖCK full-LED lighting 4 x LED work lights Psdpfxsyrlcgj Altopu Toolbox rear left Full-length seam-welded interior wall profiles CARGOFLOOR moving floor with 21 slats, material thickness 8 mm ribbed Remote control operation Rear end plate made of stainless steel 3 bows, reinforced for waste transport Reinforced roof tarpaulin PANAMA 900 g/sqm Swinging rear cross beam With grain hatch in left door leaf 15 pairs of recessed lashing rings in the end profile RENTING is the new BUYING – available from us immediately, also in FULL-SERVICE RENTAL.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Pjdpfx Aozhf N Doltepu

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Ppsdpfx Ajzhaxasltju

Condition: new, axle configuration: 2 axles, suspension: air, tire size: 245/70-17,5, Equipment: ABS, - EBS (Electronic Braking System) - LED lighting - Alloy wheels - Air suspension - Spare wheel - Toolbox - Central lubrication - Additional steering axle PAVIC 2-axle forestry machine low loader, type: STLT2Z for harvester transport ---- Upcoming! Color freely selectable!!!! Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis made of welded steel construction using high-grade fine-grain steels Lashing eyes: 130 kN per side, 5 units each Additional lashing eyes: 3 pairs on the raised bed Insertable stake pocket system made of galvanized steel with aluminum sideboards (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety lock SKF central lubrication system with reservoir (controlled by brake light), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length including rear section: 11,364 mm Saddle height: 1,330 mm Ground clearance at driving level: 184 mm Kingpin projection: 600 mm R1 dimension (kingpin to front): 410 mm (swing radius) R2 dimension (kingpin to frame): 2,150 mm (swing radius) Further dimensions available on request (technical drawings) Axles: 2 x 12,000 kg (technical), Gigant with drum brake, in combination with 8 pcs. 245/70 R17.5 premium tires on Alcoa Dura Bright rims Suspension: Pneumatic with lifting and lowering function Second ride height + approx. 50 mm can be activated from the driver’s cab. When speed exceeds 20 km/h, the trailer lowers automatically. Including axle load gauge Coupling device: 2'' kingpin (interchangeable, single position) WITHOUT landing gear! -> Customers typically use a wide wooden beam under the front frame. Brake system: Wabco EBS with axle load measuring system (Smartboard) incl. odometer Parking brake: spring-actuated Lighting system: 2 pairs of tail lights (3-chamber lights) Side marker lights LED Outline marker lights LED Front and rear position lights LED Ppjdpfeyr Izxsx Altsu Reversing and auxiliary lights, each in a round design License plate light LED 1 round beacon, plug-in and cab-operated via separate switch 4 x LED work lights 4 x oversize markers, double-secured (wing screw and pin) with LED lighting red/white Steering: Tridec HF-E (hydraulic forced steering on both axles) including automatic centering and straight-ahead function. Remote control Tridec (wireless remote), also operable by cable Paintwork: Entire steel structure shot-blasted after welding and primed with special adhesion primer. Subsequent 2-component paint finish in RAL color of choice. Axles and wheel hubs painted black or, for an extra charge, finished in RAL color Other mounted parts are galvanized and/or painted/powder-coated or made of aluminum (with or without anodization) Approval: Including §13 report Including §70 report (customer must provide a suitable and approved 3-axle tractor unit); includes, among other things, turning circle test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors, and changes. Axle configuration Tire size: 245/70-17.5...

Condition: used, mileage: 204,495 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2023, Equipment: AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, retarder, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Differential lock - High beam headlights - Enclosed cab - Cab - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Air horn - Particulate filter - Radio/Multimedia system - Rotating beacon - Disc brakes - Seat heating - Sun visor - Lane keeping assistant - Auxiliary heater - Toolbox - Windshield Internal number for customer inquiries: 6-072-1 & 2 Used vehicle -> Immediately available MAN TGX 33.520 6x4 BL TG3 short log truck with Epsilon Q150Z 96 = €149,900.00 net Optional trailer PAVIC 2-axle HTA20 = €19,990.00 net Truck description: Cab GM: the spacious (wide, long, medium height) LED headlights Psdjy T Exlopfx Altepu LED daytime running lights, fog lights, position lights and tail lights Stone chip protection for headlights, coarse-mesh grille Protective cover for rear lights Suspension: leaf spring/air Wheelbase 4,500 mm + 1350 mm Rear frame overhang 2550 mm Tire size front 385/65R22.5, rear 315/80R22.5, non-driven axle 315/80R22.5 Engine D26 510 hp EURO 6E R 2400 Nm MAN TipMatic 1230 OD, with retarder 35 Differential lock in rear axle Fuel tank aluminum 390 l + 80 l AdBlue Trailer hitch ROCKINGER 500 G 6 or 4040 Central locking with remote control Glass sunroof, electric All exterior mirrors are electrically adjustable and heated Cab insulation NORDIC (against cold) Auxiliary heater EBERSPÄCHER Automatic climate control Digital axle load display (ALM) in the cab for air-suspended axles Display in instrument panel for trailer data (axle load) Cool box under bunk, fully retractable MAN EasyControl control panel, 4 functions, can be operated from outside when the door is open Parking brake Full brake assist Driver comfort seat with air suspension, lumbar support, shoulder adjustment and heating Multi-function steering wheel, leather, height and tilt adjustable, with parking position Front radiator protection, grille Bumper, steel, 3-piece 1 lower bunk Storage compartment on the back of the cab with gooseneck lamp, control module, alarm clock and charging station MAN Media System Navigation Professional 12.3 inch Navigation SD card EUROPE Hands-free system 'Comfort' for 2 mobile phones MAN SmartSelect infotainment control with touchpad and direct selection buttons MAN Sound System Advanced with subwoofer Lane-Guard-System IV (LGS IV) can be deactivated Lane departure warning LDW Attention warning system MAN AttentionGuard Standard extended warranty for drivetrain for the 3rd year of operation up to 450,000 km; subject to maintenance records and more. Superstructure: OptiPa platform body in lightweight construction made of high-strength fine-grained steel 4 x OPTIPA SL platform bodies 8 x OPTIPA AL10 aluminum sideboards Stable aluminum front wall 6800 mm loading length with aluminum Toolbox Access ladder Loading crane of your choice: Palfinger Epsilon Q150Z 9.6 Telescopic length 96 (dm) Z-arm system 9.6 m Including elevated seat Model Q150Z load moment 140 kNm Double telescope Crane operator protection roof can be mounted/retrofitted for a small additional price. Financing possible through our financing partners. For further questions, please contact...

Condition: excellent (used), mileage: 250 km, power: 382 kW (519.37 HP), first registration: 01/2026, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Aluminium fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air-suspended seats - Air horn - Particulate filter - PTO (power take-off) - Radio/multimedia system - Disc brakes - Sleeper cab - Seat heating - Lane departure warning system - Stability control - Auxiliary heater - Pre-heating system - Toolbox - Windscreen Internal number for customer inquiries: 3-020 MAN TGX 33.520 6x4 BL TG3 WITH LOADING CRANE OF YOUR CHOICE Vehicle description: GM cab: the spacious cab (wide, long, medium-high) LED headlights LED daytime running lights, fog lights, position lights, and taillights Headlamp stone guard/protection, coarse-mesh grille Rear light protective roof Leaf/air suspension Wheelbase 4,500 mm + 1350 mm Rear frame overhang 2,550 mm Front axle tires 385/65R22.5, rear axle 315/80R22.5, trailing axle 315/80R22.5 D26 engine, 520 HP, EURO 6E, R 2400Nm MAN TipMatic 1230 OD with retarder 35 Differential lock in rear axle Aluminium fuel tank 390l + 80l AdBlue AHK ROCKINGER 500 G 6 or 4040 Central locking with remote control Electrically operated glass sunroof All exterior mirrors electrically adjustable and heated NORDIC cab insulation (thermal protection) EBERSPÄCHER auxiliary heater Automatic climate control Digital axle load display (ALM) in cab for air-suspended axles Display in instrument panel for trailer data (axle load) Fully retractable cool box under sleeper bunk MAN EasyControl control panel, 4 functions, operable from outside with door open Steering brake Emergency brake assist Driver comfort seat, air-suspended with lumbar support, shoulder adjustment, and heating Multifunction steering wheel, leather, height and tilt adjustable with park position Front grille protection Three-part steel bumper 1 lower sleeper bunk Storage compartment on rear cab wall with goose-neck lamp, control module, alarm clock, and charging station MAN Media System Navigation Professional 12.3-inch Navigation SD EUROPE 'Comfort' hands-free functionality for 2 mobile phones MAN SmartSelect infotainment control with touchpad and direct access buttons MAN Advanced sound system with subwoofer Lane Guard System IV (LGS IV), switchable Lane Departure Warning (LDW) MAN AttentionGuard driver alertness system Standard drivetrain warranty extension for the 3rd year of operation up to 450,000 km; see service record for conditions and much more. Superstructure: OptiPa subframe structure in lightweight design made of high-tensile fine-grain steel 4 x OPTIPA SL stanchion bodies 8x OPTIPA AL10 aluminium load supports Robust aluminium front wall 6800 mm loading length with aluminium Factory tool box Access/storage boxes Loader crane of your choice: Palfinger Epsilon TZ15 9.8 or Palfinger Epsilon Q150Z 9.6 Alternatively: TajfunLIV 150Z 9.6 with or without cab Price with TajfunLIV crane 150Z 9.6 from €199,990.00 net Pedpfsyluldjx Altopu Financing through our...

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Ppjdezg H Thspfx Altou

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FOR SALE: JayCraft Cook Quench Chill System – High-Efficiency Food Processing Line Manufactured by JayCraft, this high-performance Cook Quench Chill (CQC) system is designed for fast, efficient, and consistent cooking, rinsing, and chilling of a wide range of food products. Built to the highest industry standards, this system is ideal for processors of pasta, rice, vegetables, pulses, and more. Product Overview: Manufacturer: JayCraft Food Machinery (UK) Function: Cook → Quench → Chill – continuous food processing system Application: Designed for precision cooking, starch removal, and rapid cooling Build: Heavy-duty stainless steel construction for hygiene and durability Condition: Excellent – factory-tested and ready for operation Key Features: Energy-efficient cooking and chilling Controlled temperature zones for optimal product consistency Integrated water management and filtration High-throughput design for increased production efficiency Easy access for cleaning and maintenance Compact footprint – suitable for a wide range of production facilities Ideal for Processing: Pasta (fresh, dried, or filled) Rice and grains Vegetables (peas, carrots, green beans, etc.) Pulses and legumes Ppedpfxoxc Ekke Altju Noodles and more JayCraft Cook Quench Chill (CQC)

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,620 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,120 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, side walls 600 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear side walls, side walls swing and fold down, side walls with spring relief, platform floor made of 4 mm fine-grain steel, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degrees to the rear and 45 degrees to the side, continuously height-adjustable drawbar, stakes pluggable at the rear, geared support winch with load and fast gear at the front, receiving shaft for two aluminum loading ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity per pair 10 t and 2 x folding supports at the rear, ramps suitable for steel tracked vehicles and rubber tires, Price: 1,500 Euro, , -- Subject to printing errors, mistakes and changes, sample images --, more information at: !, more details: ! Ppsdpfozgvcxsx Altju

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Ppedozgvb Ispfx Altsu

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,620 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,120 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, side walls 600 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear side walls, side walls swing and fold down, side walls with spring relief, platform floor made of 4 mm fine-grain steel, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degrees to the rear and 45 degrees to the side, continuously height-adjustable drawbar, stakes pluggable at the rear, geared support winch with load and fast gear at the front, receiving shaft for two aluminum loading ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity per pair 10 t and 2 x folding supports at the rear, ramps suitable for steel tracked vehicles and rubber tires, Price: 1,500 Euro, , -- Subject to printing errors, mistakes and changes, sample images --, more information at: !, more details: ! Ppsdszgftyjpfx Altju

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Podpfozgftaex Altepu

Condition: new, empty load weight: 3,280 kg, maximum load weight: 7,220 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Psdpfszgfrvsx Altspu

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ppedozgc Egopfx Altsu

Condition: new, empty load weight: 3,280 kg, maximum load weight: 9,720 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, with side wall extension 900 mm high, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ppsdpfxozgc D As Altju