Used Gomaco Ghp 2800 for sale (3,063)

Condition: good (used), Year of construction: 2010, Formax Ultra F26 former available for sale. Machine is fitted with Verti-Form option and is ideal for poultry burgers and nuggets. Bought new in 2010. Bdodpfx Absqudinebok

Condition: good (used), Year of construction: 2006, operating hours: 248 h, load capacity: 1,000 kg, lifting height: 2,800 mm, fuel type: electric, mast type: duplex, construction height: 1,900 mm, empty load weight: 907 kg, mileage: 248 km, This electric stacker from the SWISS brand STOCKLIN, built in 2006, is in good condition; Capacity is 1,000 kg; The stacker lifts up to a height of 2,800 mm; Clearance height is 1,900 mm; The battery is in good condition and comes with an INTERNAL charger; Only 248 operating hours; Schedule a test drive. Video to follow. Bdodpfx Ajwv Hlxsbbjk

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa Bjdpfx Asd Nnb Robbodk 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro.

Condition: excellent (used), RL40/1B. ZM Oil throughput 230kg/h Bodpfx Asig Tw Tobbsdk

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator Bjdpomt Dcfjfx Abbsdk In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vacuum stuffer Bodpfx Abewf Alyebjdk Brand Vemag Model HP20E Year of production 2014 Power 23kW Voltage 400-460V 38A 3~50/60Hz

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, total height: 2,600 mm, total length: 100,000 mm, total width: 1,000 mm, pressing force: 120 t, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer OCMAC s.p.a. Italy ( acimall) S/N 0243 / 25634 year of construction 1995 Hydraulic self-adjusting electronic carcase press for the assembly of furniture. Automatic feeding of the workpieces Technical data: Max. usable mass: Length 2300mm width 600mm Height 1500mm Min usable dimensions: Length 500mm Width 300mm Height 200mm Feed rate of the conveyor belt: 2,4-12M/min Closing time of the press 20-40 seconds Installed power 11.5 kW Bdjdpfoqai H Tex Abbek Max pressure: 120 bar Voltage: 380 V , 50 hz Net weight 4500 kg

Condition: excellent (used), Year of construction: 1990, I sell the press for glued massive solid wood panels Maweg Hildebrand Euro-Auto Material size 2800X2000 x 120mm 2pcs. vertical pistons hydraulic. Bdjdpfxeg Dvu Ts Abbek 2pcs. horizontal pistons hydraulic. Very good condition. Avialable immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 762 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, nominal power (apparent): 22 kVA, controller manufacturer: Hurco, controller model: Max, workpiece weight (max.): 1,360 kg, total height: 2,775 mm, total length: 2,400 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,360 kg, overall weight: 4,900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,200 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2008 Hurco VMX30M Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Hurco Max Single Screen CNC Control Condition: Very Good High-Precision CNC Milling – Powerful, Rigid and Reliable Bdodpsxy Iz Tsfx Abbok 2008 Hurco VMX30M Vertical Machining Centre, in good working condition. Engineered in the USA by Hurco Companies Inc., the VMX30M delivers precision 3-axis machining, high-speed spindle performance, and intuitive CNC control. This model is ideal for toolrooms, precision engineering, and production machining across metals and composites, offering impressive rigidity and productivity in a compact footprint. ⚙️ Technical Specifications – Hurco VMX30M Model/Type: Hurco VMX30M Vertical Machining Centre Year: 2008 Travels (X / Y / Z): 762 mm / 510 mm / 610 mm Table Size (W × L): 510 mm × 1020 mm Max Table Load: 1360 kg Spindle Taper: BT 40 Spindle Speed: 10000 rpm Spindle Power: 13.2 kW Tool Changer Capacity: 24 stations (ATC) Rapid Traverse Rates (X / Y / Z): 30 / 30 / 20 m/min CNC Control: Hurco MAX Single Screen Control Machine Dimensions (L × W × H): 2400 × 2200 × 2775 mm Machine Weight: 4 900 kg Condition: Good – ready for production use 🌟 Key Features and Advantages Rigid Heavy-Cast Iron Frame – excellent vibration damping and machining accuracy. High-Speed 10 000 RPM Spindle – perfect for aluminium, steel, and tool steel machining. Powerful 13.2 kW Drive – delivers consistent torque across the speed range. Generous Travels (762 × 510 × 610 mm) – handles large parts or multiple fixtures easily. 24-Tool Automatic Tool Changer – reduces setup time and increases throughput. Hurco MAX Control Interface – user-friendly conversational and ISO G-code programming. High Rapids 30/30/20 m/min – fast positioning for shorter cycle times. Robust Design and Proven Reliability – built for continuous industrial operation. 🧰 Applications Precision machining and mould manufacture Aerospace and automotive components General engineering and toolroom production Prototyping and small-batch manufacture Why Choose This Hurco VMX30M High-accuracy CNC vertical machining centre for precision metal cutting. Good condition and production-ready. Compact footprint with large working envelope. Proven Hurco control system for easy setup and fast programming. Available immediately with delivery across Ireland and the UK at an extra cost. *Specifications are given in good faith but not guaranteed* Hurco VMX30M for sale Used Hurco vertical machining centre Ireland Hurco VMX30 specifications Hurco VMX CNC mill for sale 3-axis CNC machining centre Hurco Used Hurco CNC machine UK Ireland Hurco VMX30M good condition Hurco CNC milling machine for sale Hurco VMX CNC with MAX control Used Machine Tools Ireland Hurco

Condition: excellent (used), Provisur Coater TST Coating machine Bjdpfx Absx Ak Rvobodk Stainless, high volume throughput waterfall coating machine, maximises coverage to the right thickness while reducing excess waste, stainless mesh belt 1700mm x 600mm, recirculation pump, variable speed conveyor, adjustable flow, 3Ph Three in stock

Condition: new, Year of construction: 2025, functionality: fully functional, power: 258.5 kW (351.46 HP), filling opening width: 2,000 mm, filling opening length: 7,000 mm, number of blades: 350, rotational speed (max.): 50 rpm, rotor diameter: 635 mm, rotor width: 2,000 mm, Genox J2000 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 240kW combined shaft motor power (75Kw + 3x55kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 50rpm shaft speed. Four 2,000mm wide x 635mm diameter rotors with 350 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Bjdpfjx Aq T Dox Abbedk Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture a 800mm & 1,200mm versions of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: used, Comprehensively tested, used Lodige Model KM 600D-3ZMZ 321 stainless steel continuous jacketed ploughshare mixer. Manufacturer: Lodige Material: Stainless steel Bdedpexw Tc Dofx Abbek Capacity: 300 litre working capacity. 600 litre total capacity (product dependent) Mixing trough: 630 mm diameter X 2000 mm long Discharge Type: electrically driven Weir plate discharge direct driven by motor and gearbox Type Of Blades: Stainless steel ploughshare blades Motor: 15 kW 380 volt 3/50 1500 rpm motor and sew type R100P gearbox. Also includes: carbon steel jacket 85 litre capacity rated 5 bar design pressure at 158°C - (3) stainless steel multiple blade choppers direct driven by 5.5 kW 380 volt 3/50 3000 rpm motors - (2) side inspection doors. - mounted on mild steel support frame with (4) wheels. - Throughput performance approximately 18 cubic meter/hour with 1 minute residence time. A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 15 hp Material Of Construction: Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 3 Horsepower Of Choppers: 5.5 RPM Of Choppers: 3000 HP Of Unit: 15 Revolutions Per Minute: 1500 Jacket (Y/N): Yes Jacket Pressure: 5 Jacket Temperature: 158

Condition: ready for operation (used), Specifications: Model: 1120SPL Manufacturer: Hosokawa Polymer Systems (USA) Cutting chamber: 11" x 20" (279mm x 508mm) Motor: 20 HP / 15 kW, 400V, 3 Phase Rotor diameter: 12.5" (318mm) Rotor knives: 3 Bed knife: 1 Screen area: 373 in² (2406 cm²) Typical throughput: up to 650 lbs/hr (≈295 kg/hr) depending on material and screen size Approx. weight: 1,600 lbs (726 kg) Dimensions: L 69” x W 36” x H 57” (1753 x 914 x 1448mm) Features: Heavy-duty welded steel construction Easy access for cleaning and maintenance Safety interlocks and belt-driven motor Bedpfx Abexvc D Usbedk Ideal for press-side, post-production, or recycling use Clean and well-maintained unit – ready to run

Condition: refurbished (used), Overview The Matrix 370P is a robust, semi-automatic pneumatic laminator — professionally refurbished and ready for immediate use. Designed to deliver superior lamination performance, its pneumatic pressure rollers enable the use of standard OPP film on many digitally-printed substrates, dramatically cutting lamination costs by approximately 55% while also accelerating throughput. With faster lamination cycles — up to 50% quicker than standard models — this machine is a cost-effective powerhouse for short to medium run production. Ideal for digital print shops, in-house finishing, or commercial print environments needing reliable, high-quality lamination without the overhead of a full-scale production laminator. Key Features Pneumatic pressure rollers — delivers consistent, high-quality lamination across a variety of substrates; optimised for standard OPP film. Bedpfx Ajxzqm Iebbedk Faster turnaround — up to 50% quicker lamination cycles compared to standard models, enabling higher throughput and increased productivity. Cost-effective running costs — significant savings on film usage thanks to compatibility with standard OPP film. Semi-automatic feeding & automatic sheet separation — simplifies workflow and reduces manual handling. Swing-out control panel — easy to use, ergonomic control for quick job setup and changes. Steel lamination roller & anti-curl device — ensures flat, high-quality finishes even on thinner stock. Multifunctional finishing with Express Foiling Kit — expand beyond lamination with digital foiling, holographic effects, glitter lamination, or Spot-UV style finishes. Adds value and versatility for a broader range of applications. Silent Compressor included — controls pneumatic roller pressure while keeping operation quiet enough for office or print-room environments.

Condition: excellent (used), Year of construction: 2005, operating hours: 4,900 h, functionality: fully functional, turning length: 730 mm, turning diameter: 545 mm, spindle motor power: 11,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, feed length X-axis: 410 mm, feed length Y-axis: 140 mm, feed length Z-axis: 570 mm, total height: 3,100 mm, total length: 5,180 mm, total width: 2,550 mm, spindle nose: A6, overall weight: 9,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, 2005 Mazak Integrex 100-III S CNC Mill-Turn Lathe – Fully Equipped with Automation – Low Hours🔹 Make: Mazak Model: Integrex 100-III S Machine Type: CNC Mill-Turn Lathe with Automation Year: 2005 Control: Mazatrol 640MT Pro Production Hours: 4869hrs Condition: Very Good Bdsdpfx Abexyy Ixobek We are pleased to offer this 2005 Mazak Integrex 100-III S, a high-precision CNC mill-turn center built for multi-tasking performance. Fitted with the powerful Mazatrol 640MT Pro control and only 4869 production hours, this machine delivers versatility, speed, and accuracy with minimal wear. Ideal for complex part machining, this machine features main and sub spindles, B-axis milling head, and a GL50F gantry loader for automated part handling, increasing your throughput without sacrificing precision. 🔧 Key Specifications: Max Turning Diameter: 545mm Max Machining Diameter: 350mm Max Turning Length: 730mm Bar Capacity: 52mm Main & Sub Spindle Power: 11kW each Main/Sub Spindle Speed: 6000rpm C-Axis Resolution: 0.001° indexing Milling Spindle: 5.5kW / 12000rpm B Axis Range: 225° Tool Changer: 40 ATC stations Tool Capacity: 4kg, 200mm length, 90mm diameter Control: Mazatrol 640MT Pro Tool Taper: KM63 🧰 Machine Travels: X1: 410 mm | Y1: 140 mm | Z1: 570 mm X2: 220 mm | Z2: 780 mm W-Axis: 790 mm ⚙️ Included Equipment: GL50F Gantry Loader with infeed/outfeed conveyors Automatic door for improved workflow Selection of tool holders FSE Swarf Conveyor OMF 1000 Filter System FSE Coolant Filtration & Sump Pump Chiller unit for thermal stability 📐 Footprint & Weight: Dimensions (excluding gantry): 2600 x 2200 x 2500mm Weight: 7,600kg 🚀 Why Choose This Mazak Integrex 100-III S? Low hours – only 4869 hours of production Fully automated with gantry loader Clean, well-maintained, and in very good condition High-end specs for multi-process machining Ready to go – excellent choice for job shops or high-mix/low-volume manufacturers *Specifications are given in good faith but not guaranteed* Mazak Integrex 100-III S for sale Used Mazak CNC lathe CNC mill-turn lathe with gantry loader Mazak Integrex Irish dealer Mazak 100-III S specifications CNC turning center with automation Used CNC lathe 2005 Mazak Mazatrol 640MT Pro machine CNC lathe with sub spindle Mill-turn lathe with B-axis

Condition: good (used), power: 240 kW (326.31 HP), fuel type: diesel, color: yellow, axle configuration: 6x6, Year of construction: 2016, operating hours: 8,782 h, Equipment: air conditioning, all wheel drive, Technical information AdBlue system: Yes Make of engine: OM936LA Top speed: 50 km/h Empty weight: 22.885 kg Bdsdpfx Absx A Hmmsbjk Functional Cargo space capacity: 18.000 l CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: B93A631EH01206854 Other information Max. working load: 28000 kg Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,953x2,985x3,426 Production country: DE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: new, Year of construction: 2025, functionality: fully functional, power: 148 kW (201.22 HP), filling opening width: 1,200 mm, filling opening length: 6,000 mm, number of blades: 150, rotational speed (max.): 80 rpm, rotor diameter: 390 mm, rotor width: 1,200 mm, Genox J1200 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 148kW combined shaft motor power (4 x 37kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Bedpfx Ajx Aq Twsbbsdk Four 1200mm wide x 390mm diameter rotors with 150 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, Bjdpoxfa Ipsfx Abbodk RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: used, Year of construction: 1985, Empty weight: 1.800 kg Bdedpox Au A Asfx Abbjk Perfecta 1000 rotary tablet press with electrical cabinet   Manufacturer: Fette Model: Perfecta 1000 / P1000 Year : 1985 Number of pressing stations: 22 Maximum compression force: 80 kN Maximum pre-compression force: 20 kN Maximum tablet diameter: 25 mm Maximum tablet thickness: 10.5 mm Maximum hourly throughput: 72,600 tablets Maximum filling height: 22 mm Pitch diameter: 315 mm Die plate speed: 15-55 rpm Punch shape: EU 1 Die diameter: 38.1 mm Die height: 23.8 mm Punch body diameter: 25.4 mm Upper punch length: 133.6 mm Length of lower punches: 133.6 mm Depth of punch insertion into die: 2 – 6 mm Machine footprint: 1030 x 1090 mm Net weight: 1800 kg Documentation available

Condition: good (used), mileage: 60,684 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,200 mm, first registration: 01/2018, loading space length: 2,830 mm, loading space width: 1,680 mm, loading space height: 1,390 mm, emission class: euro6, color: grey, driver cabin: day cab, tire size: 195/65R16, number of seats: 2, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, trailer coupling, = Additional Options and Accessories = - Electric windows - Electric mirrors - None - Partition wall = Notes = Configuration: 4x2, Payload: 834 kg, Curb weight: 1966 kg, Gross vehicle weight: 2800 kg, Unbraked towing capacity: 750 kg, Center axle braked towing capacity: 2000 kg, Towbar, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking sensors front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, GPS navigation, Color: Grey, Metallic, Reversing camera, Lighting type: LED lamp, Climate control, Heated seats, Bluetooth, Flashing lights, Engine power: 100 kW (134 Hp), Fuel type: Diesel, Emission standard: Euro 6, Drive technology: Timing chain, Transmission: Automatic, Power steering, ABS, ASR, Starter battery, Body type: raised, extra long, Roof rack: None, Side doors: 1, Rear closure: Double doors, Central locking, Seats: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, AC automatic, EURO6, full climate control, Carplay, Cruise control, Spare wheel, Tire type: Summer tires. = Further Information = General Information Number of doors: 1 License plate: V-222-KS Axle Configuration Tire size: 195/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread left: 6 mm; Tire tread right: 4 mm Axle 2: Tire tread left: 8 mm; Tire tread right: 8 mm Dimensions Dimensions (L x W x H): 529 x 190 x 191 cm Weights Unladen weight: 1,966 kg Payload: 834 kg gvw: 2,800 kg Functional Loading platform height: 51 cm Maintenance APK (Periodic Technical Inspection): inspected until 01.2026 Condition Bjdpfx Asx Ani Aobbjdk Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €368 per month (panel van, 72 months); Please ask for further information and conditions.

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Bedpfxjvbdyxo Abbodk Motor Power: 37kW Machine Weight: 8500kg

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) Bodpsxpgf Njfx Abbsdk 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm 3 T-sleuftafels - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: used, Year of construction: 1968, total length: 3,600 mm, total width: 1,100 mm, total height: 1,300 mm, Empty weight: 2.800 kg - Year: 1968 - Documentation available: No - CE certificate present: No - Drive system: Conventional Bdsdpjx A H Anefx Abbjk - Power [kW]: 10.3 - Centre height [mm]: 225 - Swing over bed [mm]: 450 - Distance between centres [mm]: 2000 - Bed width [mm]: 400 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 22.4 - Max. spindle speed [rpm]: 2240 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3600mm x 1100mm x 1300mm (l x w x h) - Transport weight [kg]: 2800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1986, condition: used, Dimensions (LxBxH): 266 x 142 x 251 cm Rotation speed: 26 rpm Volume: 880 l Manufacturer : OLSA Model : Speedycream 750 Year : 1986 Type: vacuum mixer Capacity: 750 Liters Bedox Auv Nspfx Abbjdk Total capacity: 880 Liters Minimum working capacity: 280 Liters Jacketed : 3 bars Inside tank pressure: 1 bar Slow stirring: 5.5 KW Planetary: 15-78 rpm Blade with Teflon scrapers: 5-26 rpm Satellite rapid mixer (located on the lid): 7.5 KW Homogenizing disperser: 1400 - 2800 rpm Movement speed: 5-26 rpm Temperature controller Planetary mixer speed indicator Internal vacuum indicator Planetary mixer power consumption indicator Fast stirrer power consumption indicator Planetary speed indicator Satellite speed selector Tilting axis Vacuum pump : 1,45 KW Drain valve Ø 65 mm Exterior dimensions: 2658 mm x 1420 mm x 2510 mm (3870 mm - lid open) Spare parts available (see photos) Original paper documentation available Video available in running condition

Year of construction: 2007, condition: used, Manufacturer: Mettler Toledo Garvens GmbH (Germany) Model: XS 2 Type: Checkweigher Year of manufacture: 2007 Maximum weighing capacity: 300 g Minimum weighing capacity: 5 g Accuracy (e): 0.1 g Readability (d): 0.1 g Maximum tare (T+): 270 g Accuracy class: XIII (1) Maximum conveyor speed: 20 m/min Maximum throughput: 60 pcs/min Operating temperature range: 0 °C to +40 °C Bodpsx An Hujfx Abbedk Pneumatic pressure: 500 kPa (≈ 5 bar) Conveyor length: 800 mm Belt width: 100 mm Pneumatic rejection: blower nozzle HMI interface: color touch screen, real-time control and monitoring USB port: Data / printer