Used Gluing Machine for sale (63,745)

Condition: good (used), functionality: fully functional, with heating wire, Hedpfeyayzasx Aa Uoi outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Transport possible at extra cost!

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Hsdpfxoxgqmxj Aa Usi Storage location: Nattheim

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams. Hedpfev Ipl Tox Aa Uji

Condition: ready for operation (used), Year of construction: 2008, Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible. Hodpew Na Hbjfx Aa Usi

Condition: new, Year of construction: 2026, Glue spreading machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) working width: 1.300 mm max. passage height: 100 mm speed: 18 m/min working height: 900 mm diameter of application rollers: 185 mm Hodjd Iz Dfopfx Aa Usi connected load: 0,5 Hp 0,37 KW operating side: right Electricity: 400 V/ 50 Hz/ 3 phases Technical equipment: - Structure of the glue spreader made of welded sheet metal. - 1 motor for driving the two rollers - Glue spreader rollers covered with acid-resistant special rubber, form-ground and grooved, wear-resistant. - The thickness of the rubber layer can be shape ground several times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to max. 5 mm on the workpieces. - Glue dosage by means of zinc sheet distribution tray. Easily extractable for cleaning. - 1 handwheel to adjust the opening of the rollers. - Accident prevention protection of the rollers - Electrical components according to the highest quality standard - CE standard

Condition: good (used), Year of construction: 1986, machine/vehicle number: 2967, Tränklein gluing machine ZW-D 500, with cardboard device, machine number 2967, built in 1986, machine is in good condition, available immediately If you are interested, we would be happy to inform you about other machines in our company. Hsdpfsvviriex Aa Uji You are welcome to view the machine in our company by prior appointment.

Condition: good (used), Year of construction: 2018, Multi Gluer 2100 Hsdjygnxmspfx Aa Uji Year of manufacture: November 2018 Folding and gluing machine for corrugated cardboard boxes, single-wall to double-wall Max. material thickness approx. 6 mm Max. sheet size 2050x800 mm Adhesive system by Baumer hhs

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges -Cutting knife -Edge plate -Transport dimensions: 900/700/H1080 mm Hodpjb A Ninjfx Aa Uei -Weight: 135 kg

Condition: good (used), Sumbel Perkeo Edge Gluer This machine is fully operational and ready for production. Hjdpfsyg Ebfex Aa Usi This is the most valued brand among small laminators. Ideal for the production of covers, decorative packaging, etc. Made in Germany. The machine uses cold glue. Copper rollers. Smooth adjustment: glue thickness and gap width. Set of separators. Easy cleaning without the need for tools. 230V power supply. Weight: 15kg. Roller width: 60mm.

Condition: used, machine/vehicle number: 006290, Max working width: 1300 mm Max. machinable height: 100 mm Hodpfsu A Evhsx Aa Uoi No of Rollers: 2

Condition: used, Gluing machine for book blocks With 2 glue application rollers (double glue application in one pass) Hodpsx Nad Iefx Aa Uei

Condition: used, Electric gluing machine for applying glue in strip form. Several glue application rollers in various widths are included. The glue reservoir can be adjusted to match the respective roller width. Hodpfxex Nadbo Aa Uji

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Tabletop machine The zig-zag thread used as the adhesive medium is applied from below Hodpfx Aow I Ur Nea Uei Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim

Condition: new, Year of construction: 2025, ENDPAPER GLUING MACHINE MAGRAF FO-32 -minimum format of book block; 110x148mm -maximum format of book block; 225x320mm -maximum thickness of book block; 50mm Hodpfx Aaofhgzae Uji -power supply; 220 V -input power; 0,1 kw -weight; 75kg -dimension; 60c110c132cm

Condition: ready for operation (used), functionality: fully functional, Machines for the production of structural packaging. Consisting of a die-cutter H-142, year 1986, size 900x1400 mm; a boxmaker by Pack Projekt (year unknown, purchased in 2009, feed width 1450 mm, additional creasing bar for vertical creasing, 350 mm slitting knife); and a gluing machine for self-adhesive tape, silicone tape dispenser and tear thread (feed 1400 mm, year 2010, hot melt glue system). All machines are used, operational, and ready for immediate use. SEE PHOTOS AND DOCUMENTS. Hjdpfoyan I Ijx Aa Uoi If interested in individual machines, simply send us your proposed price for the relevant machine and we will contact you.

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed Hodpew E Rfbofx Aa Uoi INCLUDES GLUE COOLER Technical specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm Hedjwka S Ijpfx Aa Usi - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2005, For sale BARBERAN flat gluing line, model CALH-4-1600, EN-H-4-1600 The price given in the advertisement is a net price to which VAT should be added Hsdjv Uxvuepfx Aa Uji

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Hsdpfxornkwrs Aa Usi Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: WH-650LW, type of input current: three-phase, overall weight: 5,200 kg, total height: 1,800 mm, total length: 13,500 mm, total width: 1,700 mm, warranty duration: 24 months, input voltage: 380 V, Equipment: documentation/manual, Automatic Folding and Gluing Machine – Model WH-650LW The WH-650LW is a high-speed folding and gluing machine that enables precise folding and gluing of a wide variety of corrugated and cardboard formats. Thanks to its modular design and state-of-the-art control system, it is particularly reliable, user-friendly, and powerful. Key Features: -Modular design with feeder, side register, folding unit, crash-lock area, and pressing station -Individual drive with multi-tool system for different carton sizes -Equipped with camera and pneumatic vibrator for heavy corrugated board -Optional vacuum system for flattening curved sheets -High-quality friction belts for precise feeding and transport -Crash-lock floor with multi-tool and extra-long folding unit for large boxes -Electronic counter and kicker for precise bundling -Optional square stop and pneumatic trombone unit -Advanced PLC control system with self-diagnostic function and CE-certified EU components Hedjwkicvopfx Aa Uei -Touchscreen operation (SCHNEIDER) -Max. Speed: 400 m/min -Power: 15 kW, AC 380V -Machine dimensions: 13.5 m × 1.7 m × 1.8 m (L × W × H) Our service for you: The price includes delivery, professional installation, and comprehensive on-site training for your operating personnel. The machine is delivered ready for operation and is covered by a 24-month warranty from that date. Ideal for packaging manufacturers who demand versatility, high performance, comprehensive technical support, and European safety standards. Price is net, plus VAT.

Condition: used, Year of construction: 1998, Folder Gluer ACE MACHINERY Model SIGNATURE 110N 46CS Manufacture date: 1998 - Max Carton Width: 1.100 mm - HHS Gluing device type KFE-KPE9, cold glue The machine was mainly used for gluing shoe boxes and was modified/adapted for this purpose to perform longitudinal seams and double longitudinal seams. Hodpfx Asxcv Aqsa Usi

Condition: new, functionality: fully functional, Practical – ready for immediate use without instruction. The devices are ready for operation after just 5 minutes of heat-up time. The integrated temperature controller allows stepless adjustment of the heat as needed – ensuring the optimal melting temperature for the adhesive thread. The pressure applied with the hand gluer is sufficient to firmly press the adhesive thread onto the veneer sheet. Key advantages at a glance Hedpfxjxdxlkj Aa Uoi - only approx. 5 minutes heat-up time - precise, straight-line bonding - clean thread separation - maintenance-free Item no. 0132772

Condition: new, functionality: fully functional, For efficient and clean joining of smaller quantities of veneer. A special KUPER glue thread is applied to the joint in a zigzag line. Easy and simple to handle, ready for use quickly, and features low power consumption. All the advantages of the KUPER glue thread. An ideal device for assembling smaller quantities of veneer. The device is supplied fully equipped (ready to connect) with a 2.75 m connection cable (for 230V mains voltage). Net weight: 1.9 kg Gross weight: 2.4 kg Standard accessories: 1 test spool of original KUPER glue thread type K 12, 10 threaders Glue thread available on request! Hedpfx Aasxdxbfe Usi Item no. 0121383

Condition: new, functionality: fully functional, For repairing and cross-gluing veneers. Damaged or torn veneers are reliably repaired with the simplest handling. Combined veneer strips achieve optimum tear resistance thanks to end cross-gluing. The perfect design fully utilizes the advantages of the KUPER glue thread. The practical construction of the device allows immediate use without extensive training. After an approximate preheating period of 5 minutes using the temperature controller (sold separately), the KHL 1 is always ready for operation. Light pressure is sufficient to efficiently apply the glue thread to the veneer sheet. Smooth operation is ensured by maintenance-free use. Net weight: 1.2 kg including 1 spool of glue thread 1.8 kg with temperature controller Gross weight: 2.5 kg Hodpoxdxk Hefx Aa Uoi Standard accessories 1 test spool of original KUPER glue thread type K 3, 10 threaders, 1 operating manual, item no. 51204 Item No. 0132771

Condition: new, functionality: fully functional, - Device for unrolling and moistening joint paper; including operating manual - for use with joint paper up to 20 mm wide Required joint paper available on request! Hodpfxoxd Sldo Aa Usi