Used Glue Application for sale (9,061)

Condition: used, Year of construction: 1999, machine/vehicle number: 4127, SECOND-HAND 4 ROLLERS GLUE SPREADER OSAMA S4RP-1300 - WORKING WIDTH CM. 130 WITH GLUE MIXER - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Working width 1300 mm - Automatic washer for rollers - N. 4 rollers - Volt. 380/50 - S/N 4127 - Year 1999 Laedpfx Aaewr Dc Ts Ejk - *m57

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa Laodpfx Asqu N U Dsa Eok 1 pcs TANK FOR GLUE capacity 8 kg 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar

Condition: good (used), Year of construction: 2002, Automatic Lisec butyl application machine, left to right, year 2002, consisting of: Lsdpfx Astpgupsa Eeak FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift (up to overhead frame conveyor) FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Austria and can be seen on our site on appointment.

Condition: excellent (used), Block Gluing Press STROMAB SL2-6000 Gluing length: 6000mm Gluing height: 1200mm Maximum gluing width: 200mm Number of vertical hydraulic presses: 12 Number of frontal presses: 6 Cylinder diameter: 70mm Lajdpewzg Scofx Aa Ejk Vertical cylinder pressure: 7300kg CE certificate DTR documentation

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: E0W0530R2V, For Sale: PREO Easy 5kg W Gear Pump Glue Melter 5kg Adhesive Melting System Basic Information: Device: Glue Melter 5kg Adhesive Melting System Model: PREO Easy 5kg W gear pump Heating power: approx. 2400 W Slot Nozzles: 250 mm (PREO 600W) and 5 mm (Nordson - TrueCoat Applicator - LU14H03469 200W) Hose: Preo, approx. 1 m length (198 W) up to 210°C The device can be viewed in Piaseczno by prior appointment. Includes user manual. On-site startup and demonstration possible. Lasdpfx Aewyk Rmsa Eok

Condition: like new (used), Working width: 1000 mm Glue dosage adjustment Lodpfx Aewqdpksa Ejak Manual adjustment of roller spacing Emergency stop switch

Condition: used, Year of construction: 2000, machine/vehicle number: 2852, SECOND-HAND GLUE SPREADER OSAMA TYPE S2R1300 - 1300 MM. - CE RULES - Chiller (Heat conditioner) HITEMA ECA 010/CHP 3 Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers - volt. 380/50 - sn 2852 - year 2000 Lasdpet U Iupofx Aa Ejk

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy Ljdpfxjfgunte Aa Esak main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: good (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,450 kg, type of input current: three-phase, power: 7 kW (9.52 HP), automatic Lisec butyl application machine LBH-25AS, additionally to standard frames also useable for Georgian bar frames, consisting of: - RFVS-25/25, inlet conveyor - LBH-25AS, automatic butyl application machine - RAVS-25/25, automatic frame lift - FRS-25A, automatic overhead frame conveyor Ljdpfx Aaert Ipds Eoak As a completion to a full automatic spacer frame butyl application line we also have following machines available: - RFVS-25/25U, inclination changer from +6° to -6° - A2RL-25/25RN, year 2001, full automatic desiccant filling machine for profiles with 6-24 mm width All machines are available from our stock and can be seen in our warehouse in Hofkirchen/Austria

Condition: excellent (used), Assembly press ITALPRESSE SR 3/100 Laodpfx Aowyailoa Ejk Working length: 3300 mm Working height: 1800 mm Number of vertical cylinders: 4 Stroke of vertical cylinder: 200 mm Number of horizontal cylinders: 2 Stroke of horizontal cylinder: ~110 mm Machine control via control panel Manual and automatic operating modes

Condition: good (used), Pre-melting Polyurethane Glue for Edgebanders - Available No. 4 Units Model MC 12, CE Ledpfsvkpcdsx Aa Eoak

Condition: excellent (used), Working width: 30 cm Adjustable glue application rate Single-sided glue application Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Ledpjwkgt Ejfx Aa Eeak Weight: 150 kg 380 V Year: 2003

Condition: used, Year of construction: 2008, machine/vehicle number: 21543, SECOND-HAND 2 ROLLERS GLUE SPREADER OSAMA S2R 1300 - CE RULES - Chiller (Heat conditioner) Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers - N. 2 rollers - Volt. 400/50 - SN 21543 - Year 2008 Lasder Ixy Iepfx Aa Eek

Condition: new, Year of construction: 2021, We sell 6 units new pneumatic dispenser in stainless steel inox electro-polished, volume 18 kg, made in Italiy by GMC, model 402E, complete ready to use with : 1 manual high pressure spraygun with adjustable flow, brand Wagner Air, model Colora SP5, 08 mm 1 universal nozzle 1 manometer 1 hose 4 meter lenght 4 system are with high pressure spray gun 2 system have no high pressure spray gun The price for the system with high pressure spray gun is Euro 750 The price for the system without high pressure spray gun is Euro 650 The price for the whole package of 6 units can be: Euro 3.600 Laedpfx Ajtu Enqoa Eek Price 750 Euro + VAT, negotiable, FCA and packed Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: excellent (used), total width: 7,500 mm, total height: 1,300 mm, total length: 4,500 mm, working width: 2,400 mm, Device description working width 240mm maximum element height 100mm engine power 0.18 kW year of manufacture 1999 manual roller spacing adjustment total width 75 cm total length 45 cm total height 130 cm Lodpfx Aaovzr D Es Eeak

Condition: used, Year of construction: 2004, SECOND-HAND GLUE SPREADER OSAMA MOD. S2 R 1300 - CE RULES Laodpfx Aaemxkxuo Eek - Working width 1300 mm - N. 2 rollers - Year 2004

Condition: used, Year of construction: 2000, machine/vehicle number: 2855, SECOND-HAND GLUE SPREADER OSAMA MOD. S2R 1300 - CE - Chiller (Heat conditioner) HITEMA ECA 010/CHP 3 Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers Ljdjr Iyf Tepfx Aa Esak - Volt. 380/50 - S/N 2855 - Year 2000

Condition: used, available at short notice Lasdpjx H Svwjfx Aa Eek

Condition: excellent (used), Professional drill chuck with SK40 / ISO40 taper, compliant with DIN 69871 A standard. Manufacturer: EROGLU Präzisionswerkzeuge (Germany) – high-precision manufacturing. Model: 03180PB05553 (3/16-IK). Maximum tightening torque: 20 Nm – ideal for drilling and tapping with controlled force. Version with internal cooling (IK – Innenkühlung). Chuck with torque adjustment + / –, allowing protection of tools and workpieces. Solid and durable industrial design – suitable for use in CNC machining centers and conventional machines. Condition: used, in very good technical condition – ready for immediate use. ✅ German quality – precision industrial-grade drill chuck ✅ Ideal for production and workshop applications. Ledpoxlcz Sofx Aa Eeak

Condition: good (used), load capacity: 600 kg, Equipment: foot remote control, Welding turntable, 600 kg load capacity, complete set with chuck. Infinitely variable speed and tilt adjustment. Diameter 850 mm. Height to center with vertical plate 700 mm. Horizontal height 950 mm. Length 1450 mm. Width 950 mm. Hand and foot remote control. Tilt angle 135°. Own weight 750 kg. Additional cost for chuck: €400. Laodpjw Ex Ahefx Aa Eek

Condition: ready for operation (used), Year of construction: 1989, machine/vehicle number: D205228, Heinrichsglueck H-36 welding positioner Fully functional. Square table 1050x1050mm. The set includes a remote control with adjustment of table rotation speed and inclination (135 degrees). New power and control cable. Lasdpsuiac Hofx Aa Ejk

Condition: good (used), 2 pieces 600 kg load capacity welding turntable, very robust speed infinitely variable from approx. 0,01 to 2,0 rpm diameter turntable 700mm inclination up to 135 height horizontal 850mm, tilted to middle 630mm Lsdjig T Drspfx Aa Eoak length 1,4 m x width 0,8 m with foot and hand remote control price per piece

Condition: good (used), load capacity: 2,000 kg, Height-adjustable welding turntable Load capacity 2 tons, with infinitely extendable clamping extensions and clamping claws included Very good condition Speed, height, inclination infinitely adjustable Hand and foot remote control Welding current transmission 600 amps Dimensions Length: 1940mm Width 1200mm Disc diameter 1200mm Height tilted: min, 700mm, max 1550mm Laedpfxjrmnb Io Aa Ejk Height horizontal: min. 900mm, max 1700mm Weight 1750 kg

Condition: like new (used), Year of construction: 2000, Welding turntable Heinrichsglück 15 tons load capacity Lsdpfx Aaehcbmps Eeak Condition as new complete with accessories hand remote control, foot remote control, manual, documents, electrical plans everything available dimensions: Diameter of the clamping disk 2200 mm Height tilted to the middle 1450 mm Height horizontal 1800 mm speed 0,025 to 1,1 rpm Tilting range 0 to 135 Length 3400 mm Width 1800 mm plus 300 mm Dead weight 8000 Kg

Condition: excellent (used), load capacity: 600 kg, Equipment: foot remote control, Welding turntable 600 kg load capacity with foot remote control Diameter of the large clamping disk 950mm Diameter of the small clamping disk 600mm Horizontal height 1070mm incl. feet (250mm) Height tilted to center 820mm incl. feet (250mm) Laedstumf Ispfx Aa Ejk Speed infinitely variable from 0.01 to 2 rpm Length 1200mm Width 800mm