Used Glass Chamber for sale (5,483)

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Credpfx Aszh Htwsixef Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space): ±0.1°C ... ±0.3°C Crsdozh Htqspfx Aixjf Maximum temperature change rate: Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time: ±1% to ±3% Dew point range during long-term tests: +2 / +94 °C Dew point range during short-term tests: -20 / +2 °C External dimensions (L x W x H): 1320 x 2235 x 2137 mm Test chamber dimensions (L x W x H): 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per shelf: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerant: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your security as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Espec Type: TSA-202E-W Temperature shock chamber, water-cooled Cold chamber: -55°C to 0°C Hot chamber: +50°C to 200°C System: Two-zone testing via damper control Temperature fluctuation: ±0.5°C Hot chamber: Temperature: Heating time: from ambient temperature (20°C) to +200°C within 15 minutes. Cold chamber: Credszh Htkjpfx Aixjf Temperature: Cooling time: from ambient temperature (20°C) to -55°C within 35 minutes. Temperature: Recovery time: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Cjdpfxozh D S Ro Aixsrf Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Codpfxozh D Rys Aixerf Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Climate chambers Type: EXCAL 1413-HA Air-cooled climate chamber EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD storage, Windows 7, and 2 USB ports. This makes it state-of-the-art. Technical data: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Window 350 x 380 Volume: 138 liters Feedthrough installed as standard R1: 80 mm ∅ L1: 80 mm ∅ Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time ± 0.1 to ± 0.3 K Crjdpfx Aszh D Rtjixsf Temperature homogeneity spatially ± 0.5 to ± 1.8 K Temperature change rate Heating: 15 K/min Cooling: 10 K/min Data for climate tests: Temperature range +10 to +90 °C Humidity range 10 to 98 % RH Data for operation: 3/N/Ph+T 400V ±10% 50 Hz Rated power 9.8 kVA Refrigerant R-404A / R-23 Weight: 430 kg For your peace of mind as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Crsdezh D Rmepfx Aixof Replaceable swivel nozzles Nozzle holder swivels and is replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for the test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant Csdpfx Ajzh D E Roixorf 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), - Ready for immediate use - Feed speed: 0.5 - 5 m/min - Glass thickness: 3 - 55 mm - Can mitre grind up to 45° Cedpfstqr Hpex Aixjrf - 13 grinding and polishing wheels - Complete documentation available - Weight: 5700 kg - Has been regularly serviced and operated with a water treatment system, - very clean machine - Connected loads: 26 kW, 400 V, 50 Hz, 6 bar

Condition: good (used), Extremely stable and heavy-duty sanding machine suitable for daily and continuous production. The machine is designed for durability and precision thanks to its robust and first-class materials. Crsdpoq Dp Dxsfx Aixof - Type: 111F - Serial number: GG111F-22160 - 11 spindles - Year of construction: 2016 - Glass thickness: 3 - 50 mm - Min. dimension 40 x 40 mm - Machine dimensions: 11250 x 1800 x 2700 mm - Sanding profile: Flat edge with seam - Number of wheels o 3 diamond wheels edge o 1 diamond wheel rear edge o 1 polishing wheel rear edge o 1 diamond wheel front edge o 1 polishing wheel front edge o 4 polishing wheels edge - Operating pressure: min. 6 bar - Working height: 800 mm - Weight: 3,600 kg - Machine control via central display - Running direction: right - left - Feed speed: 0.6-6 mtr./min. - Connected loads: 400V, 50 Hz, 10A - 2x available - Machine was operated with central water treatment, is sold without water tray and pump.

Condition: good (used), The Bystronic glass cutting line for split band dimensions (Maximum 3300 x 2550 mm) Crsdpfx Aiot Et Icjxof Service/spare parts are provided by Hegla, who purchased Bystronic. 1 Bystronic KTR tilting table, Serial No. E9801016-1, o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm o Glass thicknesses 2-15 mm o With belt conveyor • 1 breaking table with breaker bars and air cushions o Serial No. E980016-4

Condition: used, • Technical Data: • Washing width – 2800 mm • Support height – 900+/-30 mm • Min. glass dimensions – 360 x 300 mm • Max. glass dimensions – 4800 x 2800 mm • Glass thickness – 2-19 mm • Transport speed – 2-13 m/min • Operator side – left • Adjustable upper frame height extendable up to – 400 mm Crodpfx Aisw Adn Rjxof • Number of spray units – 2 pcs • Number of washing units – 2 pcs • Number of drying units – 5 pcs • Brush roller adjustment – pneumatic • Machine width – 3760 mm • Machine length – 3480 mm • Machine height/with blower platform – 1480 mm / 3900 mm • Price on request

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, overall weight: 2,200 kg, type of input current: AC, Equipment: documentation/manual, We are offering this used LISEC LBH-25AR insulating glass manufacturing machine, manufactured in 2014, for sale. Serial/drawing number: 572-074946 Weight: 2,200 kg Rated current (full load): 10.0 A Apparent power: 7.00 kVA Voltage: 400 V Frequency: 50 Hz Short-circuit strength: 10 kA Pressure: 6.00 bar Degree of protection: IP32 Maximum current: 1.4 A AC/DC voltage: 400 / 24 V Codozmn Iyopfx Aixerf If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, We are offering this used Lisec APKV insulating glass manufacturing machine, manufactured in 2010, for sale. Manufacturer: Lisec Model: APKV Year of manufacture: 2010 Condition: used Category ID: 519 Type ID: 2077 Machine type: Insulating glass manufacturing machine Credpfjzmn H Nex Aixsf If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), ESPEC TSA-72EL-A Temperature Shock Chamber Manufacturer: ESPEC Corporation Type: TSA-72EL-A Machine Type: Temperature Shock Chamber / Thermal Shock Chamber (2-Zone) Design: Water-cooled For sale is a used ESPEC temperature shock chamber, type TSA-72EL-A. This unit is suitable for reproducible temperature cycling and thermal shock testing in research, development, quality assurance, as well as for testing electronics, automotive components, aerospace parts, and materials. The switchover between the hot and cold chambers is performed automatically via a 2-zone damper system. Technical Data Test chamber volume: approx. 70 liters Internal dimensions (W x H x D): 410 x 460 x 370 mm External dimensions (W x H x D): 1,310 x 1,900 x 1,470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Precooling temperature: up to -75 °C Heating time: ambient temperature to +200 °C within approx. 15 minutes Cooling time: ambient temperature to -70 °C within approx. 40 minutes Temperature recovery time: ≤ 5 minutes Max. test load: 30 kg evenly distributed Cable entry: Ø 50 mm Compressed air supply: 0.4 to 0.7 MPa (4 to 7 bar) Refrigeration system / Power supply Refrigeration system: Mechanical cascade refrigeration system Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Condenser: Water-cooled Mains connection: AC 380 / 400 / 415 V 3 phases / 50 Hz Max. current draw: 45 A Equipment 10.4" TFT color touchscreen PID temperature control Program memory (RAM/ROM) Trend graph Alarm history RS-485 interface Eco mode Automatic defrost Vertical sliding door Stainless steel test chamber 2 stainless steel test inserts Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulation fan Pneumatic damper switchover Cable entry Ø 50 mm Applications Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Materials testing Component testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply Crjdpjzhkfqofx Aixsf ESPEC TSA-72EL-A Temperature Shock Chamber 2 stainless steel test inserts Accessories as shown in the pictures Scope of supply as pictured. Subject to change, errors and prior sale.

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data - Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) - Application: Depalletising of new glass containers - Configuration: Z-arrangement with pallet infeed and upper-level container discharge - Pallet handling: Pallet lifting unit with automatic empty pallet discharge - Discharge table: approx. 5,000 mm length - Conveyor: Steel chain conveyor - Drives: Servo drives (SEW) - Sweep-off system: Four-sided centring carriage, servo-driven Crodpfxjy Tn D Ds Aixef - Layer handling: Integrated handling module with suction gripper system for layer pads and top frames - Vacuum system: Ejector-based - System Configuration: - Pallet lifting unit - Container discharge table (approx. 5,000 mm) - Steel chain conveyor system - Handling module with suction gripper - Packing material magazine - Empty pallet discharge system - Safety fencing (approx. 25 m) - Light barriers and safety circuits

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 Crjdpfjyx I Awox Aixsf - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 2016, Overview  This compact filling line for cans and bottles consists of equipment from Wildgoose, Slowbeer, Enos Euro and Millipore and is designed for craft beverage production with flexible batch sizes. The line combines isobaric and atmospheric filling technologies and includes semi-automatic and manual machines for filling, capping, labeling, and product filtration. The core component is a Wildgoose WG1-CE filler (2021), capable of handling both cans and bottles with integrated seaming functionality. With its modular setup, the line is particularly suitable for small to medium-scale producers, pilot production, or specialty beverages such as craft beer, kombucha, cider, or soft drinks. Technical Data  - Capacity: - Up to 24 units per minute (atmospheric – Wildgoose) - Up to 16 units per minute (isobaric – Wildgoose) - Additional manual / semi-automatic filling capacity depending on configuration - Formats: - 20 cl – 1.5 L (depending on machine) - Container types: - Cans and glass bottles - Application: - Beer - Craft beverages - Kombucha - Cider Credpfeyxr Anox Aixjf - Soft drinks - Filling technologies: - Isobaric filling (carbonated products) - Atmospheric filling - Manual filling - Filtration: - 3-stage microfiltration system (Millipore) - Configuration: - Modular / semi-automatic line - Condition: used, good condition Scope of Delivery - Can / Bottle Filler | Wildgoose | WG1-CE | Isobaric and atmospheric filling with integrated seaming; 16 cpm (isobaric) / 24 cpm (atmospheric); formats 33 cl / 50 cl | 2021 - Manual Bottling Machine | SCH | SCHPK6 | 6-spout manual filler; approx. 250 bottles/hour; formats 20 cl – 1.5 L | 2016 - Bottling Machine | Slowbeer | RI4 | 4-spout filler; approx. 350 bottles/hour; formats 22 cl – 1.5 L | 2012 - Labeling Machine | Enos Euro | Base | Semi-automatic labeler; approx. 28–30 units/min; formats 22 cl – 1.5 L | 2017 - Crown Capper (2x) | Slowbeer | Tap Air Corona | Pneumatic crown cappers; crown sizes 26 / 29 mm | 2012 - Microfiltration System | Millipore | 3-stage | Stainless steel construction; 3-stage filtration system | 2016 Additional Information - Seaming unit is integrated in the Wildgoose WG1-CE filler - The line allows flexible switching between can and bottle filling - Ideal for craft production with frequent product or format changes - Compact footprint and modular design  

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crodpfx Aisytvyfsxjf Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  - Capacity: up to 135 bottles per minute (BPM) - Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz - Filling product: beer, carbonated beverages, kombucha, functional drinks - Filling system: isobaric probe filling with electronic level control - Fill range: 12 oz – 24 oz containers Cjdpfx Aisyigigexerf - Labeling system: cold glue labeling - Bottle detection: integrated bottle burst detection system - Construction: all stainless steel, high-hygiene design - Cleaning: automatic CIP capability - Operation: touchscreen HMI with recipe and product management - Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) - Note: frequency / voltage converter required for non-US markets - Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  - Depalletizer | KOSME / Semidepal | 2015 - Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 - Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 - Bottle Conveyors | KOSME | – | Included | 2015 Additional Information - Manuals included - Basic tooling and format change parts for 12 oz and 22 oz included - Additional documentation available upon request - All conveyance lines included - Dismantling team available to supervise reinstallation and recommissioning - Utility specifications (air, CO₂ / gas) available upon request

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Crsdpfoyb Tucsx Aixjf Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  - Year of Manufacture: 2010–2014 - Application: Water and other beverages - Capacity: - Approx. 2,000 bph (330 ml) - Approx. 1,670 bph (500 ml) - Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) - Closure Type: 26 mm crown caps - Configuration (Monobloc): - 16 rinsing heads - 16 filling heads - 1 crowning head Scope of Delivery  Crjdpjyb Tkdofx Aixjf - Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph - Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph - Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts - DE filter | Spadoni | - | 2011 | 80 hl/h - Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules  

Condition: used, Year of construction: 2022, Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data - Application: Sparkling wine (glass bottles) - Capacity: - Up to 4,500 bph - Formats & Speeds: - 0.187 L: 4,500 bph (4°C & 15°C) - 0.375 L: 4,500 bph (4°C & 15°C) - 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) - 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) - Operating hours: 2,100 Scope of Delivery  - Depalletizer | DUETTI | M Automatic | 2022 | — - Rinser–Filler–Capper Monoblock | GAI | 4033 (16 rinser valves / 24 filler valves / 3×3 capping heads) | 2022 | Isobaric - Automatic CIP System | WIN&TECH | — | 2022 | — - Microfiltration Pallets (x2) | WIN&TECH | — | 2022 | — Crodpfjyb Tf Iox Aixsf - Wirehooder | ROBINO & GALANDRINO | REKORD 6 | 2022 | — - Level & Cap Inspector | CMP | — | 2022 | — - Capsule Distributor & Monoblock | ROBINO & GALANDRINO | ZENITH F 3/18 | 2022 | — - Adhesive Labeller | MAKRO | 4 Stations | 2022 | — - Bottle Conveyors | — | — | 2022 | Included

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications - Output: 7,800 bph - Producs: Beer and CSD - Formats: - NRW 0.5 l - 0.33 l ring neck - 0.25 l LN Machine List  - Machine type: Decrater - Manufacturer: BMS - Year of manufacture: 2012 - Machine type: Decapper (Screw Cap) - Manufacturer: Rink - Decapping in the crate Euro 0,5l in 4x5 crate - Year of manufacture: 2012 - Machine type: Bottle washer - Manufacturer: Gera - Year of manufacture: 2024 - Machine type: Empty bottle inspector Crodpfxjyb Sbus Aixof - Manufacturer: Krones - Model: Smarttronic - Incl. Pusher - Year of manufacture: 2012 - Machine type: Filler - Manufacturer: Kosme - Model: Isofill G 28/960 - 28 Valves - Year of manufacture: 2012 - With Combi Capper 4 heads(Crown Cork and Screw Cap) - Capacity: - 7,800 bph - Machine type: Labeling machine - Manufacturer: Krones - Model: Robusta - Refurbished in 2012 - 10 Bottle plates - 2 Label stations with 4 grippers and 4 glue pallets - Inkjet printer - Machine type: Crater - Manufacturer: BMS - Year of manufacture: 2012 - Crate format: Modul Crate 4x5

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data - Capacity: up to 20,000 bph - Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB - Application: Water, CSD, or other beverages in returnable glass bottles - Condition: Line in good condition - Availability: Immediate - Status: Still installed and connected   Credpsyb R Uaofx Aixof Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer