Used Gildemeister Twin for sale (236)

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Laodpfx Amsxf Iamersc Marked equipement with red not come.. Some accesories and machine equipement are also available. More specs of the machine, check last two pictures.

Condition: excellent (used), Year of construction: 1993, operating hours: 2,859 h, functionality: fully functional, turning length: 600 mm, turning diameter: 290 mm, Universal Lathe – GILDEMEISTER CTX Year of manufacture: 1993 Operating hours: 2,859 h • 12-position turret tool holder Lodoyxgi Njpfx Amrjac • Max. spindle speed: 5,000 rpm • Max. turning diameter (X axis): 290 mm • Max. turning length (Z axis): 600 mm • Hydraulic 3-jaw chuck, Ø 200 mm • Spindle bore: Ø 66 mm • Chip conveyor included The machine is in very good condition and was previously used in a technical training facility.

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Lajdsin Ub Topfx Amrsc Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,700 h, functionality: fully functional, travel distance X-axis: 165 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, controller model: SIEMENS 840 D, Equipment: chip conveyor, TECHNICAL DETAILS X1 travel: 165 mm Z1 travel: 220 mm X2 travel: 165 mm Z2 travel: 150 mm X3 travel: 165 mm Lasdpfoymmdbjx Amroc Z3 travel: 650 mm Y3 travel: 80 (+50/-30) mm Bar capacity: 65 mm Main and sub-spindle speed: 5,000 rpm Turrets: 3, each with 12 stations (all driven) Driven tool speed: 4,000 rpm Tool holder: VDI 30 with drive, DIN 5480 MACHINE DETAILS Control: SIEMENS 840 D Operating hours Power-on hours: 52,511 h Spindle hours: 32,700 h EQUIPMENT C-axis Y-axis Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 202 mm, travel distance Z-axis: 450 mm, spindle motor power: 12,000 W, total height: 1,730 mm, total width: 1,563 mm, overall weight: 3,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D powerline, product length (max.): 4,000 mm, number of axes: 3, This 3-axis Gildemeister CTX 310 was manufactured in 2003. It features a maximum turning diameter of 246 mm and a turning length of 445 mm. The machine is equipped with a spindle power of 12 kW and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 310 horizontal turning machine we have for sale. Contact us for further details. • Availability: 2 units available • Spindle • Nose: FL 140 h5 • Max torque: 115 Nm (153 Nm at 40% S6) • Bore: 69 mm • Chuck diameter: 170 mm (optional 210 mm) • Bar capacity: Ø 50 mm • Working range • Swing over bed: 500 mm • Max turning diameter: 246 mm • Max turning length: 445 mm • Distance between centers: 600 mm • Turret and tools • Turret type: VDI 30 • Tool stations: 12 Laodpfx Amjympcasrjc • Driven tools speed: 4200–5000 rpm (depends on control: Fanuc/Siemens/Heidenhain) • Driven tools power: 3.3–4.4 kW • Feeds and axis data • Rapid traverse (X/Z): 24/30 m/min • C-axis rapid: 100 rpm • Feed force (X/Z): 450 daN • Resolution (X/Z): 0.001 mm • Bed • Inclination: 45° • Material: Cast iron • Electrical and auxiliary • Supply voltage: 400 V (±10%), 50 Hz • Total installed power: 24 kVA • Hydraulic system pressure: 50 bar • Coolant tank capacity: 175 liters • Control systems (options): GE-FANUC 21i-TB, Siemens 840D, Heidenhain 4290 E Additional equipment • Chip conveyor (both units) • Extraction unit (one unit)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Control system: Fanuc 310i-S • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Sliding headstock travel: 80 mm Lodpsx D H I Tjfx Amroac • Tooling on slides • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (upgraded) • Machine duty hours: 29,200 h Machine Benefits Technical Machine Benefits • Chip discharge height: 1250mm Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hello, I am offering for sale a renowned brand CNC lathe: DMG GILDEMEISTER CTX 420 Linear V4 with C-axis, Y-axis, and driven tools. The machine is in excellent technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS interface for program generation Country of manufacture: Germany Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tools with VDI 40 holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Y-axis - Driven tools - Max turning length on Z-axis: 635 mm - Max turning diameter on X-axis: 325 mm Ledpexcupcsfx Amroac - Spindle chuck BERG, diameter 200 mm - Max bar diameter: 66 mm - Coolant system - Hydraulic tailstock, programmable - Chip conveyor - Spindle drive power: 21 kW - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We offer our own stationary and mobile service support - We have sold over 700 DMG machines - We can commission the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection and are ready for operation - The machine can be purchased via installment plan or leasing.

Condition: excellent (used), Year of construction: 2004, - Fagor digital display - Accessories available Working area Max. turning diameter over bed: 350 mm Max. turning diameter over cross slide: 200 mm Centre height: 180 mm Centre distance: 1000 mm Bed width at guideway level: 255 mm Top slide travel towards headstock: 60 mm Top slide travel away from headstock: 55 mm Spindle nose with flange according to ISO 702-3 (DIN 55027) C6 (DIN 6) Spindle taper: Morse taper 6 Spindle bore: 54 mm Tailstock quill taper: Morse taper 4 Tailstock quill travel: 100 mm Tailstock lateral adjustment: ± 10 mm Spindle speed range, stepless: 40 – 2500 rpm Feed levels: Longitudinal feed: 9 Cross feed: 9 Feed rates: Longitudinal feed: 0.04 - 0.4 mm/rev Cross feed: 0.02 - 0.2 mm/rev Metric threads: Lodpeyvy Rnsfx Amreac Number: 28 Pitch: 0.2 – 4.5 mm Inch threads: Number: 21 Pitch: 76-8 TPI Module threads: Number: 28 Pitch: 0.2-4.5 mm Diametral pitch threads: Number: 21 Pitch: 76-8 DP Leadscrew thread pitch: 6 mm Tool holder section: 20x20 mm Max. spindle torque: 200 Nm Main drive power: 4 kW (5.5 HP) Electric pump power: 0.12 kW (0.16 HP) Synchronous speed of main motor at 50 Hz: 1500 rpm / at 60 Hz: 1800 rpm Synchronous speed of coolant pump motor at 50 Hz: 3000 rpm / at 60 Hz: 3600 rpm Machine dimensions Length x width x height: 2300 x 940 x 1400 mm Weight: 1500 kg

Condition: used, Gildemeister Italiana GD16 with LNS bar feeder Lasdpfx Amjy D Nw Tjroc

Condition: like new (used), Year of construction: 2009, operating hours: 26,000 h, travel distance X-axis: 725 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, spindle motor power: 11 W, spindle speed (min.): 5,000 rpm, total length: 3,171 mm, total height: 2,648 mm, total width: 4,254 mm, overall weight: 6,000 kg, CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Lodpfx Amjxf Hlbsroac Working time hours Under power: 38.000 Cutting Time: 26.000 Basic machine dimensions / weight Length mm: 3.171 Width mm: 4.254 Height mm: 2.648 Weight kg: 6.000

Condition: used, Spare parts donor We are dismantling the CNC turning machine GILDEMEISTER, type GDM 42/2A. CNC control: Eltropilot EPL 2. Machine No. 4.5733, year of manufacture 1989. Machine not operational – electrical problems. Turning diameter: normal 185 mm. Swinging diameter: max. 400 mm. Cross slide travel = linear travel: 190 mm. Longitudinal slide travel = longitudinal travel: 450 mm. Spindle bore in the turning spindle: 52.7 mm. Spindle passage in the draw tube: Ø 42 mm. Feed rate X and Z: max. 3000 mm/min. Spindle speed: 40-6300 rpm, stepless. Motor power, spindle drive: 22 kW. Mains connection: 400 volts, 50 Hz, 45 kVA. - Hydraulic 3-jaw chuck FORKARDT, Ø 200 mm. - Tool turret, 12 positions, VDI 40, every second station driven. - Driven tool station in 6 stations. - Electrical cabinet located beside the machine. Footprint of the complete machine L x W x H: 5000 x 2500 x 2100 mm. Weight of the complete system: approx. 5.7 tons. Good condition. Transport dimensions: Space requirement of the basic machine L x W x H: 3000 x 2300 x 1900 mm. Weight of the basic machine: approx. 4.8 tons. Space requirement of the electrical cabinet L x W x H: 2500 x 550 x 2000 mm. Laodpfedzqm Rjx Amrec Weight of the electrical cabinet: approx. 450 kg. Without chip conveyor. Main motor missing. Individual parts available upon request.

Condition: new, Year of construction: 2024, Protective disc made of safety glass for a Gildemeister CTX Beta 500 V4, item unused, new and in original packaging. Laedpfoyx U Slex Amrsc

Condition: used, Year of construction: 2003, turning diameter 320 mm turning length 750 mm control Siemens type 810DL CCUO turning diameter over slide rest 150 mm cross movement 185 mm spindle passage 52 mm turning speeds 14-3550 U/min transmission ratio 2 quill stroke 120 mm rapid traverse 6 m/min main drive motor 7 kW 3-jaw-chuck diameter 200 mm total power requirement 10 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6x1,44x1,44 m 8950 turning hours The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Lasdoyutucspfx Amroc About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, turning diameter 400 mm turning length 600 mm swing diameter 600 mm spindle bore 73 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Lsdjyutrujpfx Amrsac apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, Gildemeister 20, completely rebuilt to like-new condition - AC motor for production time control - AC motor for threading - GM-type, soundproofed housing - Frequency converter for programming spindle speed - 20 mm, 25 mm, 28 mm bar passage with integrated loader - Optional: CNC cross slides for X and Z axes, CNC pick-up with CNC recovery slide Ledpfx Aofzk S Domroac - CE marking

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Laedpfjwym Nfjx Amroc Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm control 2x 840 D Kühlmittelsystem Lasdpfx Ameqn A Rnjroc chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW

Condition: good (used), Year of construction: 2000, Lot of boring tools for boring mills Manufactured by Gildemeister-Microbore - Komet Spindle mount ISO-BT 50 MK 5 Ledowd Tkkspfx Amroac In good condition.

Condition: used, CNC control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture approximately 1980 Rack with 20 module slots – 12 installed modules Installed modules: 1 piece 0.651.406-19.3 UNI Universal Interface 1 piece 0.650.847-56.1 O32 Output card 2 pieces 0.651.708-57.3 I32 Input card Laodpfjflrtxjx Amroc 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Storage control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY Serial interface 1 piece 0.651.974-23.2 ABS Termination card 1 piece 0.651.298-18.3 CPU Central processor Dimensions W x H x D 480 x 260 x 220 mm Weight 7 kg Individual cards available upon request.

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Ledpfxeyh Hg Ns Amreac Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Documentation and accessories Machine is powered up and available for inspection

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm weight of the machine ca. 3,6 t Lasdpfew Syd Sjx Amrec Handwheel defective

Condition: excellent (used), Year of construction: 2016, operating hours: 75,078 h, functionality: fully functional, CNC Turning and Milling Center Gildemeister CTX gamma 1250 CT – Technically Excellent Condition (Year of manufacture: 2016) Operating hours: 75,078 Spindle hours: 48,772 Available from: Week 47 / 2026 (Inspection under power during ongoing production possible) Basic Equipment Turning length: 1,250 mm Main spindle as integrated spindle motor (ISM102) Drive power: 35/45 kW (100/40 % DC) Spindle speed: up to 4,000 rpm Partial hollow chucking device (hydraulic) Draw tube inner diameter: 104 mm, 848 mm depth C-axis with hydraulic spindle brake Upper cross slide with turning/milling spindle as motor spindle Mounting: HSK-63A DIN 69893 Hydraulic clamping during turning Y-axis: ±200 mm B-axis: ±120° (torque motor) Tool disc magazine: 36-position NC tailstock with mounted, hydraulically traversable quill and fixed live center Absolute, direct measuring systems on X, Y, and Z1 axes Coolant pump: 6 bar, 20 l/min, filtration fineness 10 µm Cooling system for spindle motors, motor console, turning/milling spindle, and B-axis USB and Ethernet interfaces Control CNC controller: Siemens Sinumerik 840D solutionline Operation: ERGOline Control Software: SINUMERIK Operate, ShopTurn 3G Operating system: Linux Extended Equipment Tool chain magazine: 120-position (instead of 36-position) Mechanical oil mist separator, filter class H13 Chuck flushing device on main spindle Coolant supply through spindle Tropical package (up to 40°C ambient temperature) Workpiece measuring probe BLUM TC60 incl. cycle package 3D data model of work area (STEP / IGES) Profibus interface Hand-held control device with jog mode and emergency stop function Tailstock force increased to 20 kN Special tailstock version for torque-proof pressure device Coolant & Chip System Coolant cleaning unit: Filter unit FK 20 (20 l/min) Coolant tank 950 l Magnetic roller MW180 Process pumps: 5 bar / 20 bar Chip conveyor type 300 S-2 (wear-resistant design, XAR) Lodpfsy A Hngox Amreac Return delivery pump: 1.2 bar Condition The machine has been regularly serviced by Gildemeister service and is in technically excellent condition. Dimensions & Weight Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg Total weight incl. accessories: approx. 22,605 kg Number of packages: 11 Loading meters: approx. 21 Disassembly, loading, transport, and recommissioning can be organized Machinery Trade Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: good (used), Year of construction: 2003, operating hours: 41,852 h, Workpiece Specifications: Max Swing Diameter: ~2500 mm (98.4 inches) Max Turning Height: ~2000 mm (78.7 inches) Max Workpiece Weight: ~10,000 kg (22,046 lbs) (depending on configuration) Spindle Specifications: Spindle Drive Power: ~50 kW (67 hp) (approximate, depending on model) Spindle Speed Range: ~10-500 rpm (variable, depending on model) Spindle Taper: Typically a large taper suitable for heavy-duty turning. Table Specifications: Table Diameter: ~2500 mm (98.4 inches) Table Load Capacity: ~10,000 kg (22,046 lbs) Axis Travel: X-Axis Travel: ~2000 mm (78.7 inches) Z-Axis Travel: ~2000 mm (78.7 inches) Tooling: Tool Holder Type: Typically VDI or similar heavy-duty tool holders. Number of Tools: Depending on the turret configuration, typically 12 or more tools. Accuracy: Positioning Accuracy: ~0.01 mm (0.0004 inches) Repeatability: ~0.005 mm (0.0002 inches) Dimensions and Weight: Machine Weight: ~30,000 kg (66,139 lbs) (approximate) Machine Dimensions: ~5000 x 4000 x 4000 mm (196.9 x 157.5 x 157.5 inches) (approximate) Additional Features: Lasdpfx Aovy Ti Hemrjc Coolant System: High-pressure coolant system for efficient chip removal and cooling. Automation: Optional automation systems for loading/unloading of workpieces. CNC Control: Advanced CNC control for complex machining tasks.

Condition: used, Integral automatic loader Pietro Cucchi Pick-up Ledpfx Amjy Exgtjreac Pick-up recovery slide Hydraulic unit for pick-up

Condition: excellent (used), CNC Turning-Milling Center Gildemeister CTX gamma 1250 CT, Year 2016 Pictures to follow... Available from March 2027 Base machine: CTX gamma 1250 CT with a turning length of 1250 mm - main spindle as integrated spindle motor, ISM102, drive power 35/45KW (100/40% duty cycle), 4000 rpm - partial hollow clamping device (hydraulic), draw tube inner diameter 104 mm x 848 mm depth - C-axis and spindle brake (hydraulic) - upper cross-slide with turning/milling spindle as motor spindle with hydraulic clamping during turning, HSK-63A DNI 69893 interface - Y-axis ±200 mm - B-axis ±120°, torque motor - disc-type tool magazine with 36 stations - NC tailstock with bearing-mounted, hydraulically movable quill, fixed center - absolute, direct linear measurement systems in X, Y, Z1 axes - coolant pump 6 bar; 20 l/min, plug-in screen filter 10 µm filtration - cooling system for spindle motors, motor console, turning-milling spindle, B-axis torque motor - CNC control with ERGOline operating panel (manufacturer and type per control description) - USB interface, Ethernet interface CNC Control: SIEMENS Sinumerik 840D solutionline with ERGOline Control, SINUMERIK Operate and ShopTurn 3G, Linux OS at no extra cost Tool chain magazine for 120 tools replaces disc-type magazine (36 tools), HSK-A 63 DNI 69893 interface, - only with Siemens control - Mechanical oil mist separator 100 m³/h, filter class H13 Chuck flush device at the main spindle, external, Coolant supply through turning spindle Tropical package for machine environment temperatures up to 40°C, consisting of control cabinet cooling unit (up to 40°C) B-H7080 workpiece touch probe, BLUM, with Quickstart cycle package including probe TC60 with transmitter and receiver unit, HSK 63A tool interface, 1 stylus, measuring cycles B-Z0908 3D data model of the specified machine workspace in Step and IGES format. Delivery of the 3D data model on CD. B-L7000 Standard electrical interface Profibus Handheld control unit: Axes X1Y, 1, Z1, C1, B1, X2, Z2, Z3, C3, C4 can be jogged and moved incrementally using the handwheel. Emergency stop and feed override functions are available on the handset. Tailstock feed force increased to 20kN. SK-2014-3518 The tailstock is supplied without quill bearing to allow fitting of a twist-proof pressure device. When used as a tailstock, a rotating center must be used. Coolant cleaning system: - Filter unit type: FK 20 * Filter performance 20 l/min * Filter medium: filter fleece PN100/100 - Coolant tank 950l type: FKA/950 - Magnetic roller type: MW180 - Process pump 5 bar (50 l/min) - Process pump 20 bar (40 l/min) with DBV 20/40 - Control cabinet Chip conveyor type 300 S-2: - Wear-resistant version (guides and base plates made from XAR) - Return pump 1.2 bar (100 l/min) etc. The full equipment and further technical data can be found in the documentation, which we are happy to provide on request. The machine has always been serviced by Gildemeister customer service and is in technically perfect condition. It can be inspected under power and during production. Dimensions & weight: (LxWxH) Machine CTX Gamma DL 125 – 580x280x285 cm, 20,000 Kg Chip conveyor 670x125x160 cm, 1,000 Kg Total weight incl. accessories 22,605 Kg Number of packages 11 Loading meters: 21 Dismantling, removal, shipping, and reinstallation can be organized. Laodpfx Aoy Axuxsmroc