Used Gildemeister Nef 660 for sale (241)

Condition: excellent (used), Year of construction: 2004, operating hours: 22,953 h, functionality: fully functional, machine/vehicle number: 0680000211, travel distance X-axis: 650 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, rotational speed (max.): 5,000 rpm, New PCU in 2018! TECHNICAL DETAILS Speed: 5,000 rpm Spindle motor: 20 kW Chuck diameter (KITAGAWA): 250 mm Control: Siemens Sinumerik 840D, POWER LINE Travel paths X-axis: 650 mm Y-axis: ± 50 mm Z-axis: 300 mm Turret and tools Turret: 12 positions Tool holder: VDI 40 Tool speeds: 4,000 rpm Tool drive power: max. 11.7 kW MACHINE DETAILS Pallet conveyor: EWAB, loading station on the right Machine weight: approx. 8 t On-time hours: 34,982h Spindle hours: 22,953h EQUIPMENT Gijdpjvvii Uofx Admjl - Measuring probe - Driven tools - C-axis - High-pressure pump with 20 bar, 500 l and double changeover filter - Immersion cooler for coolant - Electrostatic suction of LTA - Collecting tray under the machine - Kitagawa 3-jaw chuck B210 - EWAB pallet conveyor with loading station on the right - Chip conveyor

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Giedpfswzbq Tsx Admel Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Gedpfx Adsin Ub Tjmjil Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Gildemeister SPRINT 65 Linear IRCO Breuning bar feeder Chip conveyor High-pressure unit with integrated paper belt filter system and cooling unit Fanuc 310 control Operating hours: approx. 61,550 Production hours: approx. 46,400 Gijdpfx Aswwa U Aedmsl The machine can be inspected under power Immediately available

Condition: ready for operation (used), Year of construction: 2000, operating hours: 12,013 h, functionality: fully functional, turning length: 580 mm, turning diameter: 100 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 36 mm, TECHNICAL DETAILS Bar diameter: 36 mm Chuck diameter: 100 mm Turning length: 580 mm Swing diameter over bed: 145 mm Turning diameter: 100 mm Spindle speed: 2 x 25 - 8,000 rpm Sub-spindle: yes Indexing: 2 x C-axis, 0.001° degree Turret Number of turrets: 2 x 12-position VDI 25 Powered tool stations: 2 x 12 Tool rotation speed: 31 - 6,300 rpm MACHINE DETAILS Control: Sinumerik 840 D Total power requirement: 50 kVA Machine weight: approx. 6 t Space required: approx. 4.8 x 2.2 x 2 m Operating hours: 21,521 h Gjdexqpfbjpfx Admoil Spindle hours: 12,013 h EQUIPMENT - SIMAG bar feeder 42.1, year of manufacture 2000

Year of construction: 2002, condition: good (used), functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. Gedjn Uum Hjpfx Admoil TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: good (used), Year of construction: 2003, Manufacturer: DMG Gildemaster Country of manufacture: Italy CNC control FANUC 16i-TB with 7 axes CE declaration of conformity Technical data - Number of axes: 7 - Number of spindles: 2 Travel paths: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) [mm] - Travel path: 120 [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm Driven tools: Power of the tool drives: 1.1 kW Max. speed: 6,000 rpm Bar loading magazine IEMCA SMART 316 Chip conveyor Gjdjvvx H Njpfx Admeil Machine dimensions: approx. 2043 x 1200 x 1750 [mm] Machine weight: approx. 2200 [kg] Spindle, counter spindle with new bearings!

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm bore depth 320 mm Godpfx Adst Hwvajmoil swing diameter mm total power requirement 33 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2006, Machine is in good working condition Gsdpevax N Ejfx Admeil

Condition: ready for operation (used), operating hours: 31,819 h, turning diameter over cross slide: 290 mm, turning length: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 645 mm, rotational speed (max.): 5,000 rpm, - CNC lathe with EPL 2 control, equipped with round magnet. It was last used for fine contour turning of hardened components. (without chuck, tailstock and chip conveyor) Technical data Swing diameter over bed: 300 mm Swing diameter over face: 290 mm Travel path X: 210 mm Travel path Z: 645 mm Speed range: 25 - 5000 rpm Tool carrier: universal disk turret Gedjqcu Uvopfx Admjil Tool positions: 12 Tool holder: 30 mm (DIN 69 880)

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Gijdpfx Ajv Irgysdmjl Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Year of construction: 1998, condition: ready for operation (used), Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools. Gijdsw Tl Ifepfx Admsl

Condition: good (used), Year of construction: 1999, operating hours: 140,810 h, functionality: fully functional, Gildemeister MF SPRINT 65 Machine No.: 07810000801 Control: SINUMERIK 840 C Year of manufacture: 1999 Operating hours: 140,810 Irco ILS short bar feeder Annual maintenance by DMG, last service on 08.07.2024: - Linear guides, axial bearings, ballscrews and locking nuts renewed on X1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on X2 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z2 axis - All telescopic cover wipers replaced - Safety glass in work area door replaced - All feed timing belts as well as the counter spindle drive timing belt replaced Gjdpsu Dg Ubjfx Admoil - Tool drive 1 dismantled, disassembled, cleaned, and newly fitted with bearings - Main spindle fan filter mat replaced, coolant valves of turret 1 and 2 replaced - Main spindle and counter spindle chucks dismantled and cleaned - Machine geometry and work area remeasured and adjusted - Hydraulic filter cartridges replaced, pneumatic filter replaced - Technical data see attachment Machine can be inspected under power. Price: €25,000 negotiable The offer is subject to confirmation and non-binding. Changes and errors in technical data or specifications as well as prior sale reserved. Used machines are sold as seen, without any warranty claims. Delivery ex works, packaging and insurance exclusively unless otherwise agreed. Price is net plus legally applicable VAT. Payment to be made, as is customary for used machines, prior to loading.

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm control total power requirement kW Gsdjt Hwz Ajpfx Admoil weight of the machine ca. t dimensions of the machine ca. m CNC-lathe with bar feed with Sameca bar feed

Year of construction: 2006, condition: like new (used), With machine come 5 live tool holders and 5 normal tool holders. Gsdelbmy Uspfx Admeil Parts shown by hand not come.

Condition: not inspected (used), Gildemeister GLD 20 Gisdpfxjvu Tn Es Admel

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5601-0106, turning length: 320 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,800 kg, bar passage: 33 mm, equipped with Iemca Boss 542 new in 2000 – well tooled – Ge Fanuc 18i-T Control Giedpfx Adexn R N Ajmol

Condition: ready for operation (used), Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible. Gedpfxev Uqcgs Admoil

Year of construction: 2009, condition: ready for operation (used), Turning diameter: 200mm, passage diameter: 330mm, passage diameter over cross slide: 260mm, travel X/Z: 160mm/460mm, feed X/Z: 24m/min, speed: 5000rpm, spindle clearance: 51mm, spindle power: 16.5kW/11kW, torque: 1665.5Nm/112Nm, tailstock: 400mm, tool positions: 12. Machine dimensions X/Y/Z: approx. 4200mm/1700mm/2300mm, weight: approx. 3500kg, control: Siemens Sinumerik 810D. Including chip conveyor. Documentation available. On-site inspection is possible. Giedpjv Dkb Iofx Admel

Year of construction: 2002, condition: ready for operation (used), Main spindle: turning diameter: 33mm, speed: 8000rpm, power: 7.5kW. Slide 1: travel X/Y/Z: 320mm/50mm/255mm, rapid traverse X/Y/Z: 30m/min, tool stations: 5. Slide 2: travel X2/Z2: 165mm/200mm, rapid traverse: 30m/min, tool station: turret, tool stations: 8, driven tools: 8. Coolant volume: 400l, pump capacity: 80l/min. Machine dimensions X/Y/Z: approx. 2500mm/1550mm/1750mm, control: Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Gijdpfxsu T Rirs Admjl

Year of construction: 1991, condition: ready for operation (used), Two identical Gildemeister six-spindle bar turning machines with the corresponding bar loading magazines are available. Number of spindles: 6, max. workpiece diameter: 25mm, speed: 8000 rpm, spindle bore: 32mm, max. bar diameter: 32mm, max. bar length: 3300mm, machine dimensions X/Y/Z: approx. 8000mm/2000mm/3000mm, weight: approx. 5000kg. Including bar loading magazines. Gedpfx Adoudbmvjmoil

Year of construction: 2002, condition: ready for operation (used), Axes: XYZCB (8-axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tool system: VDI30/tooth profile, torque: 150Nm, speed: 5000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2430mm/5600mm/2430mm, weight: approx. 13000kg, operating hours: approx. 34624h, spindle hours: approx. 22797h. Gijdpfetufbyox Admel

Year of construction: 2002, condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Godpfoubyy Nsx Admsil

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Giodpfstqfq Uex Admsl

Year of construction: 2004, condition: ready for operation (used), A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Godpfx Ajwmdv Ajdmsil