Used Gear Shaper for sale (7,838)

Condition: good (used), I am selling this machine, equipped, already disconnected, stored in stock. Video of the machine can be sent. max. wheel diameter 710 mm max. module 10 Spindle speed : 700-2800 1/ min. Machine weight : 13,500 kg Psdpfx Aetuipmokisgu

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Podpfjw Al U Eex Akiegu For more information, please contact us.

Condition: like new (used), Year of construction: 2022, power: 2.2 kW (2.99 HP), SEW Eurodrive KH77 DRN90L4/BE2/DI/DFC/IV Manufacturer: SEW Eurodrive Type: KH77 DRN90L4/BE2/DI/DFC/IV Serial Number: 01.8125801513.0001.22 Technical Data Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed [rpm]: 2900 Output Speed [rpm]: 33 - 1.6 Total Gear Ratio [i]: 88.97 Max. Torque [Nm]: 1,550 Output Torque [Nm]: 645 Service Factor SEW-FB: 2.40 Design: IM M1A ISO Designation: CLP 220 Lubricant Type: Mineral Oil Lubricant Quantity [l]: 2.10 Motor Power [kW]: 2.2 / 0.11 Motor Rated Power [kW]: 1,500 Motor Frequency [Hz]: 100 Mains Rated Frequency [Hz]: 50-60 +/- 5% Supply Voltage [V]: 3x AC 380 -5% to AC 500 +10% Mains Rated Current [A]: 5.00 Output Rated Current [A]: 5.5 Duty Cycle S1-S10: S1 Adjustment Range (VT): 1:20 Motor Voltage [V] / Switching Mode: 230 Delta Motor Mains Frequency [Hz]: 50 cos phi: 0.74 Insulation Class [°C] / Protection Class [IP]: 155(F) / 54 International Efficiency Class: IE3 Motor Mains Efficiency [%]: 85.6 Efficiency at 50/75% Pn [%]: 84.6 / 86.1 Ambient Temperature Min. [°C]: -20 Ambient Temperature Max. [°C]: 40 Brake Voltage [V] / Brake Torque [Nm]: 400 AC / 10 Brake Rectifier: none Nameplate: German Weight: 78.00 kg SEW Eurodrive Gear Motors – Various Types Immediately Available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideally suited for use in machinery and plant engineering, in material handling technology, and for numerous industrial applications. Available Types: 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor Speed: 1,461 / 12 rpm Total Gear Ratio: i = 121.46 Max. Permissible Torque (Ma max): 8,000 Nm Output Torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Including Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 33 – 1.6 rpm Total Gear Ratio: i = 88.97 Max. Permissible Torque (Ma max): 1,550 Nm Output Torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total Gear Ratio: i = 57.28 Max. Permissible Torque (Ma max): 820 Nm Output Torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total Gear Ratio: i = 108.29 Max. Permissible Torque (Ma max): 600 Nm Pgjdpfx Akozrdg Nsiju Output Torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Including Decentralized Inverter: DFC20A-0020-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 30 – 1.5 rpm Total Gear Ratio: i = 97.81 Max. Permissible Torque (Ma max): 200 Nm Output Torque: 177 Nm General Information Manufacturer: SEW-EURODRIVE Robust Industrial Quality Various Power and Torque Ranges Available Partially with Integrated Decentralized Frequency Inverter (DFC) Ideal as a Replacement Drive or for New Projects

Condition: new, Gear motor 5.5 kW, operating on a 400 V three-phase network with a high-efficiency IE3 class motor. Reduces the motor speed from 1460 to 95 rpm. Pgods Afdx Ajpfx Akisu

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Table size: 1800 mm Psdpfjylprfjx Akiegu Minimum diameter: 200 mm Maximum number of teeth: 45 Max. module: 20 Weight: 40 tons

Condition: used, Year of construction: 1989, max. wheel diameter 120 mm gear width 400 mm max. module 10 Pgedpfxjz Drcae Akiju min. module 1 total power requirement 40 kW weight of the machine ca. 7 t dimensions of the machine ca. 3,840 x 5,025 x 2,490 m

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 679, overall weight: 8,000 kg, Equipment: documentation/manual, Höfler Helix 400k gear grinding machine The HÖFLER Helix 400k is currently in operation at our customer's production facility and is fully ready for use. An inspection and machine demonstration under production conditions can be arranged by appointment. The machine has been regularly serviced and maintained by Buss-Maschinenservice for several years. As part of the maintenance work carried out to date, all pneumatic hoses have been replaced, and several servo drives and servomotors have been overhauled or replaced. The mechanics have been inspected, and any necessary repairs have been carried out. The machine is being sold due to the purchase of new equipment. If desired, we will handle the complete machine relocation – from professional dismantling and packaging to transport, installation, commissioning, and customer training at the new location. Pgodpfx Akjz Dqtwjieu

Condition: used, operating hours: 24,159 h, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Year of construction: 2011 Axle 1: left 12 mm right 12 mm Pgodpfx Asy Uw Alekiju Axle 2: left 18-18 mm right 18-18 mm Axle 3: left mm right mm

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Pgsdpoymf Dajfx Akieu Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: new, Gear motor 1.5 kW, 365 rpm, 39 Nm. With forced cooling. Pgedpfx Ako Afdytsiou

Condition: refurbished (used), functionality: fully functional, motor manufacturer: ROTOVAL, gearing type: mechanical, total height: 580 mm, ROTOVAL BS400 GEARED MOTOR DRIVEN BLOWING SERIEL NO 005199.01.01 5" AIR CONNECTION BUYER TO ARRANGE COLLECTION AND FREIGHT Pgsdpev Sqv Ujfx Akiju

Condition: used, Year of construction: 2003, Liebherr LC120 Gear Hobbing Machine 3mm maximum hobbable module 1,500 rpm maximum hob speed90mm maximum hob diameter 200mm maximum hob lenght 45 hob head swivel angle 4 mimimum number of teeth 120mm maximum workpiece diameter 250mm maximum axial travel 145mm table diameter 250rpm maximum table speed 17kN load capacity 30mm tailstock travel 17,000mm/min rapid traverse Pgodpfx Aez Stlajkiju 13kN tailstock holding force 775879h working hours

Condition: used, Year of construction: 2003, Rausch Gratomat MS150/3-800 Multi-Spindle Deburring Machine 20-800mm workpiece diameter 150mm maximum vertcal working stroke 150mm maximum gear face width 1-8 modul range compatibility 4 number of grinding spindles 26,000rpm grinding spindle speed Pgedpfjz Stwvjx Akieu

Condition: used, Year of construction: 2020, max. wheel diameter 1.000 mm gear width 500 mm max. module 2 min. module 50 Control Klaassen table load of rotary table max. 3.000 kp dia. of 3 jaw chuck 365 mm Pede Ad Rlgopfx Akijgu dimensions of the machine ca. 2,85x1,5x2 m

Condition: used, operating hours: 21,822 h, gearing type: automatic, color: other, Year of manufacture: Aug 2015 Year of construction: 2015 Axle 1: left 22 mm right 22 mm Psdpfszvfyfox Akiogu Axle 2: left 26 -26 mm right 26-26 mm Axle 3: left mm right mm

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, position of the milling head: Schwenkbar (50°), table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, rotational speed (max.): 360 rpm, rotational speed (min.): 18 rpm, distance table to spindle center: 500 mm, tool diameter: 215 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Pgjdpsz Et N Rsfx Akieu Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 115,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The ZFWZ 5000 originates from Modul's Chemnitz gear machining division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that houses the Modul drawing archive. Proven kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. Pedez Etmpepfx Akijgu The machine mills external gears, both straight-toothed and helical, up to a module of 40 in hobbing and up to a module of 50 in single-indexing. With the internal milling attachment, internal gears are produced for gear rings of large roller bearings, rotary couplings, and planetary hollow gears, as used in wind power, mining, crane, and shipbuilding technology. Workpieces up to 5000 mm in diameter can be accommodated on the 4000 mm table, the milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for roughing with high chip volume as well as finishing with precision. Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance from milling spindle axis to table axis 300–1800 mm, distance from milling spindle axis to table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full availability of spare parts and support, in an air-conditioned switch cabinet of our own manufacture. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. The geometry acceptance is carried out according to the manufacturer's standard or DIN, with a protocol, jointly with you in Chemnitz. The scope of delivery also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Machine weight ..... 18500 kg Podpfx Aev Nqppekiogu Can send a video of the machine, via whatsapp.

Condition: excellent (used), Year of construction: 1997, max. wheel diameter 820 mm Pjdpez Hz Rljfx Akisgu gear width 300 mm max. module 8 min. module 0,5 clamping length 865 mm number of teeth 10 - 600 max.helical angle +/- 30 ° turning speeds 1100 - 2150 U/min grinding wheel diameter 280 - 400 mm grinding wheel width 84 /104 workpiece weight max. 300 kg weight of the machine ca. 11,5 t dimensions of the machine ca. 6,0 x 4,8 x 2,9 m including Reishauer AF Filter, flanges, wheels,...

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 1,200 mm, position of the milling head: Schwenkbar (45°), table diameter: 1,200 mm, total length: 5,250 mm, gear diameter: 1,250 mm, total height: 4,420 mm, total width: 4,700 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 160 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,000 mm, overall weight: 22,000 kg, distance table to spindle center: 780 mm, tool diameter: 260 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A ZFWZ 10 module for large gears up to 1250 mm in diameter and module 22, which was completely overhauled in 2009 by SerWeMa and converted to a Siemens Sinumerik ONE with six CNC axes. The machine is in operational condition in our hall in Chemnitz: you can inspect it while it is running, we can mill your own sample part on request, and you can pick it up from us. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul, owns the module drawing archive, and knows the machine inside and out. Pjdpfx Aez E Hy Askiogu The ZFWZ 10 is the classic Chemnitz gear hobbing machine for gearbox construction, crane and conveyor technology, mining, and heavy machinery construction: heavy cast iron bed, 1200 mm table, milling head with ±45° swivel range. It mills spur and helical gears up to module 16 in hobbing and up to module 22 in single indexing. With 1000 mm of axial travel between the cutter axis and the table surface, long shafts and large workpieces can be securely clamped. The Sinumerik ONE controls all six axes with an electronic gear train; the SerWeMa gear software guides you through workpiece and tool data via masks, without requiring programming. Technical data: max. workpiece diameter 800/1250 mm, table diameter 1200 mm, distance between cutter axis and table axis 80–780 mm, distance between cutter axis and table surface 350–1350 mm, max. module 16/22, max. cutter diameter 260 mm, max. cutter length 350 mm, tangential travel 250 mm, cutter speed 20–160 rpm, swivel angle ±45°. Installation dimensions approx. 5.25 × 4.7 × 4.42 m, weight approx. 22 t. Equipment: Siemens Sinumerik ONE control with six CNC axes, machine enclosure, magnetic chip conveyor, central and loss lubrication, hydraulic unit, coolant system, operating manual. We offer the conversion to Siemens Sinumerik ONE with Sinamics S120 and a new control cabinet, either before delivery or later at your plant – then with a guarantee on the new electrical equipment. Also optional: sample part milling in our plant, geometry acceptance according to DIN, installation and commissioning at your site, operator training. Spare parts and service are provided from a single source, worldwide, even after the purchase.

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm boring diameter 125 mm Pgedpfxjzv Ulqs Akiju spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation

Condition: good (used), Gear Hobbing Machine Strausak 30 Workpiece diameter for manual loading: Ø 35 mm Workpiece diameter for magazine loading: Ø 15 mm Workpiece diameter for fully automatic loading: Ø 10–12 mm Maximum hobbing length: 12 mm Plunge feed at 42% of longitudinal feed: 22 mm Plunge feed at 25% of longitudinal feed: 14 mm Module in steel max.: 1.0 mm Psdpjx Dxu Sjfx Akisgu Module in non-ferrous metals max.: Solid material ø26 / ø35 mm Selectable number of teeth: 5–390 Cutter speeds: 1160–8550 rpm Plunge feeds per workpiece revolution: 0.0325–0.273 mm Longitudinal feeds per workpiece revolution: 0.033–0.65 mm Cutter diameter: 8–24 mm Machine weight: 600 kg Main motor: 0.8 HP at 3000 rpm Hydraulic motor: 0.25 HP at 1500 rpm Coolant motor: 0.25 HP at 1500 rpm No guarantee is given for the accuracy, completeness or timeliness of the information provided.

Condition: used, Year of construction: 1994, Used CNC gear hobbing and milling machine Pfauter P800 / 1200 Psdpfsz H Nuxox Akisgu For gear milling of spur and bevel gears.

Condition: excellent (used), Year of construction: 2007, TOP CONDITION - OVERHAULED IN 2026! Year of construction: 2007 Table format: 3000 x 1500 x 250 mm Power: 2500W Control: Fanuc incl. cooler incl. pipe axis incl. 5 axis 3D torch incl. programming software incl. training incl. commissioning incl. ball roller table FE: up to 20mm Pedo Afix Iepfx Akiegu VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Year of construction: 1990, condition: excellent (used), functionality: fully functional, hydrostatic gear box suitable for BIHLER RM 40, tested. Pgjdpfsz S T Tdox Akieu