Used Gear Planer for sale (15,660)

Condition: used, Year of construction: 2000, functionality: fully functional, – very good condition – Italian manufacture – year of production: 2000 TECHNICAL PARAMETERS: SURFACE PLANER: – working width: 410 mm – number of knives: 3 pcs – infeed table dimensions: 1030 x 410 mm – outfeed table dimensions: 930 x 410 mm – adjustable fence – noise-reducing comb THICKNESSER: Hfjdpfx Aaexl D Nqocon – planing height: 3–230 mm – shaft diameter: 72 mm – shaft speed: 5300 rpm – table size: 700 x 410 mm – feed speed: 7 m/min – main motor: 4 kW – machine dimensions (L/W/H): 200 / 90 / 120 cm – weight: 400 kg

Condition: excellent (used), Year of construction: 2008, Weinig Unimat 500 Year of manufacture: 2008 Planing width: 260 mm Planing height: 120 mm Infeed table length: 2,500 mm Feed speed: 5 - 30 m/min Feed motor: 4 kW Hfjdpfjxdm Tvjx Aacjn Automatic positioning of the left and top spindle Spindle positions: Bottom 7.5 kW Right ) Left ) 11 kW Top 11 kW Bottom 7.5 kW

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: Frenco URM-K Typ HGM 38101, For sale here is a Frenco gear measurement machine URM-K (Universal Rotational Measurement with Measuring Balls), type HGM (Horizontal, Counter-Centre, Manual) from the year 2000. The device has been out of operation for a long time. When powered on, the error 'A disk read error occurred' appears. Price is negotiable. Hfodexli Acspfx Aacjn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 606.10.028.15, power: 7.35 kW (9.99 HP), In perfect working order Hsdpfjxgvp Ejx Aacefn

Condition: used, Sheet lifter - Sheet clamp - Universal lifter Carrying clamp, beam clamp, lifting tackle for horizontal sheet transport Lifting gear for horizontal sheet transport DOLEZYCH type Dolast K15 Year of manufacture: 1997 Load capacity per clamp: 3 t Maximum load capacity: 6 t (for the twin lifting tackle) Clamping range: 0–51 mm Sheet thickness: 4–50 mm Wire rope length: 1.5 metres - Two-leg wire rope sling with eye Hodpfxjxciwzo Aacjfn - 2 lifting clamps included Own weight approx. 45 kg The lifting gear is suitable for lifting single steel plates or bundled sheet packs. Price quoted per lifting gear, 2 units available.

Condition: excellent (used), functionality: fully functional, overall weight: 78 kg, torque: 610 Nm, SEW-EURODRIVE R77 DRN112M4/TH 01.7437224601.0005.17 Inverter duty VPWM V 230/400 Hz 50 r/min 1464/63 kW 4 S1 Nm 610 Hodpfx Aexllcfeacefn kg 78.532

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger, gear motor 4 rpm -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 -Dimensions: 705/305/H400 mm -Weight: 106 kg Hfodsxamghjpfx Aacen

Condition: used, Year of construction: 2012, max. wheel diameter 600 mm gear width 600 mm profile depth 35 mm pivoting angle +/- 45 Grad grinding wheel speeds 600-6000 U/min dimensions of the machine ca. 5,1 x 6,5 x 3,7 m weight 17 t feeds X-axis 10000 mm/min feeds Y-axis 5000 mm/min feeds Z-axis 10000 mm/min table turning speeds 0 - 14 U/min control FANUC Series 30i-MODEL A CNC: Fanuc 30i Model A Maximum gear outer diameter: 600 mm Maximum module: 15 Maximum gear width (face width): 110 mm Number of teeth: 1 to 300 Wheel diameter: 20" (inches) Hodpow Tm Tpofx Aacjfn Factory spindle: 630 rpm Tool holder: No. 60 Grinding spindle: 3000 rpm Automatic door lock Smoke and mist separator MPG: Handwheel (MPG = Manual Pulse Generator) Dressing tools for finishing, diameter 2.82" Without coolant device

Condition: used, Weinig Profimat 23 planer and moulder for four-sided planing and profiling of wood with tools and an additional glazing bead saw for window production. spindles: 5 Hedpfx Asxc Hhwjacjfn spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Upstairs spindle 5: Below spindle 6: Glasleistensäge working width: 230 mm working height: 120 mm Total performance: 28 kW Rated current: 60 A

Condition: ready for operation (used), Radicon Worm gear units Type : BU 12 Hfedji A Awiepfx Aacsn Ratio : 30 : 1

Year of construction: 1970, condition: used, Cordia S26 Gear Drilling Machine Drilling capacity in steel (diameter) Hfjdsm Sg Rkopfx Aacen 26 mm throat 280 mm Drilling stroke 100 mm Total power requirement 1000 Watt , 380 V Machine weight approx. 355 kg Space requirement approx. 1060 x 1000 x 2100 incl. base plate mm Height max .500 mm Table surface 330 x 270 mm Number of spindle rotation 6 steps spindle speeds 95 - 1450 rpm Control conventional

Condition: used, Year of construction: 2002, functionality: fully functional, working width: 260 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved table Working width: 260 mm Working height: 160 mm 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm Hodoxk U Tkopfx Aacjfn 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6–36 m/min One driven roller in the table at the outfeed.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Bonfiglioli, gear motor -Speed: 22.5 rpm Hsdpexal Udjfx Aacjfn -Gearbox: Type VF30 N P56B14 i= 60 -Motor: Type BN 56 B4 0.09 kW -Design: B3 angle -Hollow shaft: Ø 14 x 55 mm -Protection class: IP 55 -Number: 3x gear motor available -Price: per piece -Dimensions: 260/145/H120 mm -Weight: 4.1 kg/piece

Condition: used, Year of construction: 1988, Planing width: 860 mm, clearance height: 200 mm, minimum clearance height: 3.0 mm, bottom motor: 18.5 kW, top motor: 7.0 / 10.0 kW Hfedpjvvkc Aefx Aacsn Storage location: Nattheim

Condition: excellent (used), Four side planer KP5-220 made in Taiwan max planing width 230mm max planing height 130mm 2 sliding rollers in the tabletop number of spindles 5 motor of the fifth spindle is mounted on the floor feed on cardan shafts with smooth adjustment Hfsdpfsk Ttknox Aacen fully adjustable spindles machine works quietly without vibration, checked in very good condition, chrome tops

Condition: ready for operation (used), Eagle Gear Box Reduction : i = 1 : 85 Dimensions : 1100 mm x 800 mm x 400 mm Ext. Axle : diam. 50 mm, with Pulley SPC 400-3 Int. Axle : diam. 100 mm, with socket Hjdoi A Ap Aspfx Aacsfn

Condition: excellent (used), Gear motor Flender MBH 125CC-B 27.7/1 Hodsk E Htcspfx Aacsfn Helical bevel geared motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Suitable frequency inverters Walther Flender ZZ0103069.34003 Sinus Penta available Altogether 15 geared motors and 12 pieces frequency inverters available !!! Very good condition, directly from production!!!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: diverse, travel distance X-axis: 700 mm, travel distance Z-axis: 375 mm, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, mount diameter: 30 mm, turning diameter: 100 mm, chuck outer diameter: 160 mm, turning height: 150 mm, Equipment: documentation/manual, Linked EMAG machining line for spur gears / planetary gears / gears. Highly productive manufacturing line for planetary gears, including integrated automation with raw part storage, marking unit, basket stacking cell for finished parts, and a complete dry-production process. Comprising: - 1x EMAG raw part storage (stacker) - 2x EMAG vertical single-spindle turning centers VLC 100 (Siemens 840 Dsl) - 1x EMAG-KOEPFER vertical hobbing machine VLC 200 H (Siemens 840 Dsl) - 1x EMAG-KOEPFER vertical chamfering machine VLC 100 C, press deburring (Siemens 840 Dsl) - 1x EMAG "TRACKMOTION" internal automation with two carriages (Translift) and dedicated control system, operated via mobile HT8 handheld, for component feeding and transport in the automation aisle between stations (with integrated turning unit) and part removal Hfsdpfxsk Aacae Aacjn - O-band automation for up to 24 pallets at each EMAG machining station, enabling optional independent automated operation for each machine - 1x part marking station (MARKATOR scribe marker) - 1x EKF automation (gantry) for part handling between EMAG TRACKMOTION, marking station, and stacking cell - 1x EKF basket stacking cell as finished part buffer with 3 basket stacks, uninterrupted operation even during basket stack changes Turning centers with 12-position VDI30 turret, sister tool management, tool life monitoring, integrated probe for dimensional control. Dismantling and loading of the machining centers is the responsibility of the buyer. A powered inspection by appointment is possible. Price/Details on request Sale only within EU countries All technical details are subject to error/typo.

Condition: good (used), gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Bonfiglioli, gear motor Hfjdpovzxytjfx Aacon -Gearbox: Type 200220031 MVF 27/F 210 rpm -Engine: Type BN 27C 4 -Power: 0.09 kW -Design: B14 angle -Shaft: Ø 9 x 28 mm -Protection class: IP 55 -Dimensions: 263/150/H110 mm -Weight: 3.5 kg

Condition: excellent (used), Kolle thicknesser spiral shaft planing width 630mm planing height 230mm 3 feed gears motor 5.5KW rollers in the table top electric lifting digital display divided pulling roller machine checked, ready to work Hfsdpfju Ekv Eex Aacen

Condition: good (used), Globoid gear, indexing, oscillator indexer, index gear, rotary index drive -Manufacturer: CAMCO, index gear Hfsdpfxewz Idte Aacen -Type: MSHV40A917-Y7A -Overload clutch: 11FC-SD -Shaft: Ø 55x45 / 35x80 / 35x75 mm -Translation: 20 rev. = 90° -Dimensions: 815/720/H585 mm -Weight: 327 kg

Condition: like new (used), Year of construction: 2021, SCM thickness planer Planing width 410mm 4 knives 2 feed speeds digital display of planing height on thicknesser 220cm length of planer tops electric brake Hfodpfx Ajulafhjacen CE mark adjustable culaga aligner, checked machine, perfect condition, like new weight 550kg

Condition: good (used), flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: KEB, flat gear motor -Type: F 4.2 C DK 100 LX 4 W TW i= 11.38 -Speed: 50 rpm -Engine: Type SK 100 L/40 -Power: 3.0 kW / 1410 rpm -Hollow shaft: Ø 40 x 150 mm -Protection class: IP56 Hfjdjt Hy Thjpfx Aacen -Dimensions: 445/230/H360 mm -Weight: 60 kg

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm Hfjdporigxysfx Aacon machine checked in original condition

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor, bevel geared motor, bevel geared motor -Condition: unused -Manufacturer: SEW-Eurodrive, bevel gearmotor with brake Hedjt Ult Aopfx Aacsfn -Type: K77 DRE132MC4BE11/TF -Translation: i= 7.24 -Speed: 203 rpm -Power: 7.5 kW -Protection class: IP55 -Shaft: Ø 50 x 100 mm on both sides -Brake: 55 Nm -Number: 1x motor available -Price: per piece -Dimensions: 860/410/H290 mm -Weight: 132 kg/piece