Used Gea Mixer for sale (208)

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day Chodpovhctwefx Ap Dod - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm Chjdpsyrdlaefx Ap Dsd L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Gea combiGrind 200 frozen block grinder. In lovely condition. Has been fully checked over. stainless steel worms. Chsdpsy U Hrijfx Ap Dod

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 24 A, Excellent condition brine injector – complete steaker line (type TDC-400), brine cooler and brine filter, little used, fully functional. 3-phase connection, 12 kW, 24 A, 380 V. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Csdpfx Aoyfgwlsp Djhd

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel electrically heated 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm Codpfx Apezz H Sas Dehd net belt width : ± 500 mm in- and outfeed belt teflon infeed belt adjustable speed sediment removal system filter suitable for fire protection mechanical hoists dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: excellent (used), Year of construction: 2022, operating hours: 800 h, Equipment: documentation/manual, Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Chsdpfx Apezii N Dj Dod

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Chodpfoy Rtlzjx Ap Djd

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Max. throughput: 30 m³/h Cjdowayr Topfx Ap Dohd

Year of construction: 2010, condition: used, Manufacturer : GEA Niro Soavi S.p.A. Model : NS 2006 H Version : ARIETE Year : 2010 Type: Laboratory piston homogeniser Execution : SANITARY Special features: FDA-compliant + electropolished (Ra < 0.5 µm) + cGMP-compliant   Number of Plungers: 2 Cjdpfxjyyq E De Ap Dshd Plunger material: CERAMIC Plunger diameter: 10 mm Plunger stroke: 40 mm No. of Stages : 2 Type of Control : HANDWHEEL Maximum pressure: 1500 bar Maximum viscosity: 500 cP Maximum temperature: 140 °C   Main motor power: 5.5 kW Speed: variable Min. flow rate: 17.5 L/h Max. flow rate: 35 L/h   Heat exchanger with no cross-flow Power cabinet + control panel Complete technical file

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. Chedpfxsz Sy Etj Ap Djd mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Chsdpfx Ajvvn Icsp Dsd

Condition: used, all stainless steel belt width 1.000 mm Chsdpfxez Rnyve Ap Dod adjustable speed 0,75 kW dimensions (l x w x h) : ± 1.750 x 1.300 x 1.350 mm

Condition: used, cooking length ± 13.000 mm belt width 600 mm all stainless steel Chodpsz Imw Hjfx Ap Djd with electrical hoist steam heated (steam generator not included): 780 kg/h (6bar) temperature distribution in 2 zones dimensions (l x w x h) : ± 14.400 x 2.000 x 2.700 mm adjustable speed

Condition: used, all stainless steel water circulation net belt length 9.000 mm net belt width 900 mm adjustable speed Cjdpfxsz I N Sts Ap Dehd lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Csdpfx Apoz Harzs Dshd Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Year of construction: 2010, condition: ready for operation (used), A high-pressure homogenizer GEA is available. Stroke: 100mm, plunger diameter: 80mm, max. operating pressure: 200bar, throughput capacity: approx. 14000l/h, max. product temperature: 90°C, max. process temperature cleaning/sterilization: 140°C, machine dimensions X/Y/Z: approx. 2250mm/1600mm/1600mm, weight: approx. 3500kg. Including control cabinet and spare parts. The unit has new gearboxes. Documentation available. An on-site inspection is possible. Chsdpfx Aeyx H Huop Ded

Condition: used, Consisting of : “GEA-CFS” former Type VM 600 HSE all stainless steel speed up to ± 50 strokes / min. (Depending on the product, shape, temperature and machine settings) mobile with outfeed conveyor belt width 600 mm surface of the dies 570 x 130 mm suitable for dies with a thickness of min. 6 mm and max. 40 mm power 22,8 kW weight 1.750 kg dimensions (l x w x h) : ± 2.500 x1.300 x 2.200 mm 3x400v 50 Hz mobile new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes) + “Berief” contact cooker Type Dubra DB 8/600 continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg + “Kersting” After Heating Tunnel net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm Chsdpfozzcqfsx Ap Dod adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: used, for dry coatings Codpfx Apoz E Icls Dehd all stainless steel belt width 630 mm adjustable speed with air knife with vibration plate digital - touchscreen overall dimensions (L x W x H) : ± 3.100 x 1.500 x 2.100 mm

Condition: used, Year of construction: 2002, power: 90 kW (122.37 HP), The CFS ChunkMaster 400 industrial grinder is a heavy-duty machine designed for meat processing plants that require exceptional performance, consistent raw material particle size, and the highest quality finished product. The machine is based on the proven Wolfking/CFS grinding platform, later continued as part of the GEA product portfolio, which is why the ChunkMaster 400 enjoys an excellent reputation in the industry for its reliability, durability, and low maintenance costs. Technical Specifications of the CFS ChunkMaster 400 Meat Grinder Manufacturer: CFS Model: ChunkMaster 400 Equipment type: Industrial meat grinder Year of manufacture: 2002 Grinding system diameter: Ø400 mm Power supply: 400 V, 3-phase, 50 Hz Current draw: 162 A Power: 90 kW Dimensions: What is the CFS ChunkMaster 400 meat grinder used for? The ChunkMaster 400 is designed for grinding a wide range of meat raw materials: beef, pork, poultry, fat, and trimmings, as well as fresh, chilled, and slightly tempered meat. The machine is well-suited as part of a raw material preparation line for the production of sausages, ground meat mixtures, burgers, pet food, and convenience products. The large feed hopper, with a diameter of Ø400 mm, allows for the processing of significant quantities of raw material while ensuring gentle handling of the product and minimal temperature increase during grinding—which directly impacts the quality and shelf life of the finished product. Design and Cutting System The ChunkMaster 400 grinder is equipped with a robust stainless steel frame, a durable feed auger, and an industrial gearbox designed for continuous operation in large meat processing plants. The raw material feeding system ensures a smooth and uniform product flow, minimizing compression—thereby preserving the natural structure of the muscle tissue and resulting in a higher-quality final product. The machine can be configured with various Unger cutting sets, allowing for raw material particle sizes ranging from coarse pre-grinding to fine grinding, depending on the blades and screens used. Key advantages of the CFS ChunkMaster 400 grinder Large grinding system with a diameter of Ø400 mm, Exceptionally high production capacity, Gentle handling of raw materials, Minimal temperature increase during grinding, Excellent preservation of meat particle structure, Industrial-grade, heavy-duty gearbox and hygienic stainless steel construction, facilitating access for cleaning and maintenance, Chsdpszmgqtjfx Ap Dod Easy access to replacement parts; screens, cutting blades, and drive belt included One of the greatest advantages of the ChunkMaster 400 grinder is the continued availability of replacement parts. Many mechanical components remain compatible with later CFS MaxiGrind and GEA MaxiGrind series, and independent manufacturers continue to offer OEM replacements—which significantly facilitates the long-term operation and servicing of this machine.

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection Chjdpfxez Harho Ap Djd weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection Chjdpfx Apez Harnj Dod overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: like new (used), HERMETIC CLARIFIER. POWER: 7.5 kW. COMPLETE TOOL SET. INSPECTED. DOCUMENTATION AVAILABLE. PRICE: 25,000 EUROS PLUS VAT. Chodpfey S Smyox Ap Djd

Condition: used, all stainless steel suitable for thermic oil heating 210 kW thermic capacity frying length 3.000 mm belt width 1.000 mm adjustable speed infeed and outfeed conveyor isolated canopy 10 kW sediment removal system Chjdpfx Apoz Nhpuo Djd filter oil level control low - high oil circulation pump suitable for CIP-cleaning electrical hoists dimensions (l x w x h) : ± 6.650 x 2.300 x 3.500 mm

Condition: used, all stainless steel nett belt length 4.500 mm nett belt width 600 mm Chsdpfxoz Imvpe Ap Djd overall dimensions (l x w x h) : ± 7.400 x 1.900 x 3.150 mm suitable for thermic oil heating (= 214 kW) with top hold down belt adjustable speed sediment removal system electrical hoists

Condition: used, all stainless steel belt width: 650 mm total dimensions: (l x w x h) : ± 2.900 x 1.250 x 2.500 mm mobile Chedpfx Aoz I N Rvep Dsd height of the flights 30 mm outfeed height ± 1.000 mm infeed height : ± 2.400 mm