Used Gea Ahlborn for sale (187)

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Lhedpfxsx Antuo Al Ijh Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, pressure: 220 bar, overall weight: 7,000 kg, Equipment: documentation/manual, type plate available, Manufacturer: GEA / Niro Soavi Model: NS 5160 H Year of manufacture: 2004 Lhedpfovvmzzjx Al Ieh Capacity: 10,000 - 20,000 l/h Max. operating pressure: 220 bar Number of pistons: 5 pistons Number of stages: 1 stage Including control cabinet (in excellent condition, recently renewed) Condition: very good

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection Lhsdpfx Asyvrwtjl Ish MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Lhjdpfx Alsyvrtuo Ieh Evaporation performance: 15,000 l/h Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Condition: good (used), Used pressure vessel with agitator Last application: Pharmaceuticals / Chemicals Item number: 10882 Volume: 345 litres Type: Vertical on 4 legs Material (product-contact): 1.4571 / AISI316 Design: Single-walled Operating pressure (as per nameplate): -1/ +0.8 bar Operating temperature: 100°C Tank dimensions: Outer diameter: 744 mm Inner diameter: 740 mm Total height: 1,590 mm Total width: 800 mm Total length: 1,200 mm Cylindrical height: 600 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Fittings/Features: Nameplate: Yes Agitator: Yes Outlet diameter: 40 mm Discharge height from floor: 335 mm Outlet valve: Disc valve Lhjdpow A Inujfx Al Ieh Control cabinet

Condition: excellent (used), functionality: fully functional, Slicer line CFS type UniSlicer with MC control, fully stainless steel, including: - CFS Check DC 2000 MK3 (scale) - CFS Horizontal Distributor - CFS discharge conveyor ATB 3100 MM - Accessories & documentation - Several spare parts Machine entirely made of stainless steel. Ledpfxjyk D Hbe Al Iehh

Condition: used, Year of construction: 2020, functionality: unexamined, machine/vehicle number: 1739-596, rotational speed (max.): 4,800 rpm, Equipment: type plate available, Used disc stack separator for fermentation lees separation. Machine mounted on a complete skid with the option to purchase additional spare parts. Motor: 55 kW - 60 Hz. Belt drive. Permissible nominal bowl speed: 4,800 rpm. Minimum throughput: 8 m³/h; maximum throughput: 22 m³/h. Permitted feed product density: 1.16 kg/dm³. Permitted heavy liquid density: 1.1 kg/dm³. Permitted solids density: 1.3 kg/dm³. Maintenance tool set with ring spanner and compression tool included. Lhedpfx Alexy R A Ts Ish

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, Manufacturer: GEA (TDS) Type: Aseptic Tank Year of manufacture: 2015 With manhole With agitator Including valves Lsdpoyrdzbsfx Al Iehh Including control cabinet for valves Condition: as new, never used

Condition: used, The Alfa Laval M10-MBASE is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. Technical Specifications Type: M10-MBASE Heat transfer area: 2.6 m² Plate material: Stainless steel Alloy 316, thickness 0.50 mm Gasket material: NBRFF Clip-On (Nitrile rubber) Plate pack thickness: 63 mm Total weight: 232 kg Total volume: 13 liters Dimensions: Height 672 mm, width 618 mm, depth 530 mm Connection standard: DIN NW100 Bolts: M20 Expandable: up to 17 additional plates Operating Data Design pressure: 10 bar Test pressure: 14.3 bar Design temperature: up to 120 °C Minimum temperature: 0 °C Typical flow examples (according to datasheet): Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa) Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa) Fruit juice: 240 L/h (heating 21 → 75 °C with 90 °C hot water, Δp ≈ 40–50 kPa) Design Features Plates with parallel flow channels ensure high efficiency and low pressure drop. Clip-on gaskets for easy maintenance and cleaning. Robust frame and pressure plate construction with M20 tightening bolts (length 360 mm). Flexible capacity expansion, up to 17 additional plates can be installed. User-friendly assembly with clear A/B plate markings. Typical Applications Beverage pasteurization (e.g., wine, juice, beer) Hot water and cooling water circuits Lhedpfexytv Nex Al Ijh CIP cleaning systems General process heat transfer in industrial applications

Condition: used,

Condition: reconditioned (used), Year of construction: 1998, KEG system, manufacturer: GEA Till, type: KEG-BOY C2, for approx. 25 KEGs/hour, for KEGs with flat fitting, with 1 internal cleaning station and 1 filling station, with 1 cleaning agent tank, with control cabinet. The system is overhauled and equipped with a new control unit. Lsdpfxew Hxuyj Al Iohh

Condition: used, functionality: fully functional, Drycooler, Free cooler, Glycol cooler, V-Coooler, Hybrid cooler, Cooling tower, Heat exchangers in different capacity , Güntner, Cabero, GEA, Thermokey, Thermofin, Refrion, Swegon, Jaeggi, Gohl, ec. ec. from 50KW- 5000KW cooling capacity for Genset 95-70°C or chillers 45 38°c Lsdpfx Asywaa Ejl Iehh

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Weight: 400 kg Height: 205 cm Width: 130 cm Lhjdemmdq Topfx Al Ioh Depth: 65 cm

Condition: excellent (used), Program-controlled pasteurizer for fruit juices and cremogenates with indirect heating and a regenerative heat exchanger circuit, including a CIP connection. Features: *Production: 30,000 l/h depending on the product. *Number of tubes: 94. *Includes Simens Simatic control panel. *Max. viscosity: 25 cp/10°C *Max. pulp percentage: 89% Lhodpfxjwnzcpo Al Ioh *Max. fiber length: 6-8 mm.

Year of construction: 2001, condition: excellent (used), Westfalia Decanter Lhedod Rwwxepfx Al Ioh Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of manufacture: 1978 Drum speed: 3,300 rpm Last operational until: 2004 Application area: Used in the production of base oils for the removal of solid particles. The decanter was decommissioned after a production change in 2004 and is therefore fully functional.

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: - Manufacturer: Niro Atomizer - Model: MSD - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Lhsdpfxoxgg Hbe Al Ijh Evaporators/High Concentrators: - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Evaporator (Pre-concentrator) - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h - Operating principle: MVR and TVR (hybrid)

Condition: ready for operation (used), Year of construction: 2007, Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg. Ljdpstpct Njfx Al Ishh

Condition: ready for operation (used), A GEA clarifier (skimmer) is available. Bowl speed: 5920 rpm, material density: 1.1 kg/dm³, production capacity: approx. 10000 l/h, motor power: approx. 18 kW, construction material: stainless steel 316, documentation available. On-site inspection is possible. Ledpfx Aju S I D Dsl Ijhh

Condition: ready for operation (used), Year of construction: 2003, A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible. Ljdeydpz Depfx Al Ishh

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Lhodpou Av H Dofx Al Ish

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Lhedsx Sywajpfx Al Ish

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week Lhsdpfevhctwsx Al Ieh - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: type plate available, Two professionally disassembled compressors from the manufacturer GEA Bock. Technical data sheet available, see images. Lhodpfx Aowuvquol Ish

Condition: used, Year of construction: 1980, used, good conditionmake GEA-Casadeitype DE 410year 1980machineNr. 80-12-72planing width approx. 410 mmtable length infeed approx. 1200 mmtable length outfeed approx. 1000 mmjointing bartable lips slotted/low noisenumber of knives 4 piecessuction connection D 120 mmspace requirement approx. 2300 mm x 800 mm x 1000 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Lsdpfxjvwfxzj Al Iehh

Condition: used, Year of construction: 1988, from training workshop, public authority pivotable for long workpieces used, in good condition machine cleaned, overhauled greased, function tested, trial run manufacturer Gea type Kapre 3000 year of manufacture 1988 one-sided from below press cylinder Ljdpowbi Exofx Al Iohh 1 heating rail working length 3000 mm pneumatically operated mobile New parts: mist lubricator compressed air lines 2 pot seals for press cylinder 2 pot seals for clamping cylinder plug for heating rail Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Handover in current condition as inspected, without warranty or liability